Although the wear of conventional polyethylene liner becomes a serious problem in a long term follow up after total knee arthroplasty, there are few reports of measuring the polyethylene wear. Is it possible to measure the linear wear rates in the non-cross-linked polyethylene liner used in the Press Fit Condylar (PFC) Sigma total knee system? Does the polyethylene wear influence on the clinical results?Background
Questions/purposes
Acetabular bone deficiency, especially proximal and lateral deficiency, is a difficult technical problem during primary total hip arthroplasty (THA) in developmental hip dysplasia (DDH). We report a configuration-based classification of hip, including a definition of shallow acetabulum. We also report a new reconstruction method using a medial reduced cemented socket and additional bulk bone in conjunction with impaction morselized bone grafting (Ad-BBG method). We aimed to evaluate usefulness of the classification and the method's clinical/radiographic outcomes. Forty percent of 330 THAs for DDH were defined as shallow dysplastic hips. The Ad-BBG method was performed on 102 hips (78% of shallow hips). For the 24 remaining hips, THA was performed using the conventional interposition bulk bone grafting (8 hips)or without bone grafting by using rigid lateral osteophyte (16 hips). Operative Technique: Theresected femoral head was sectioned at 1–2-cm thickness, and a suitable size of the bulk bone graft was placed on the lateral iliac cortex and fixed by polylactate absorbable screws. Autogenous impaction morselized bone grafting, with or without hydroxyapatite granules, was performed along with the implantation of medial reduced cemented socket. Radiographic criteria used for determining loosening were migration or a total radiolucent zone between the prosthesis/bone cement and host bone. The follow-up period was 10.2 ± 2.6 (range, 6.0–15.0) years.Introduction
Methods
Acetabular bone deficiency, especially proximal and lateral deficiency, is a difficult technical problem during primary total hip arthroplasty (THA) in developmental hip dysplasia (DDH). We report a configuration-based acetabular classification, a modification of the Crowe's classification, of DDH, including a definition of shallow acetabuli. We also report a new reconstruction method using a medial reduced cemented socket andadditional bulk bone in conjunction with impaction morselized bone grafting (Ad-BBG method). We aimed to evaluate usefulness of the classification and the method's clinical/radiographic outcomes. One hundred thirty one hips of 330 THAs for DDH (40%) were defined shallow. The Ad-BBG methodwas performed on 102 hips (78% shallow hips). For the 24 remaining hips, THA was performed using the conventional interposition bulk bone grafting (Ip-BBG) (8 hips)or without bone grafting by using rigid lateral osteophyte (16 hips). Japanese Orthopaedic Association (JOA) scores and the Merle d'Aubigne and Postel (M&P) scores were used in follow-up; radiographs were analyzed retrospectively. The criteria used for determining loosening were migration or a total radiolucent zone between the prosthesis/bone cement and host bone. The follow-up period was 9.2 ± 2.6 (range, 5.0–14.0) years.Introduction
Methods
There is no report of additional type of bulk bone grafting (Ad-BG) method with impaction morselized bone graft for reconstruction of shallow dysplastic hip in total hip arthroplasty. The purpose of this study was to define the shallow acetabulum and to evaluate the clinical and radiographic results of primary total hip arthroplasty (THA) with Ad-BG method. With modification of Crowe's classification, shallow dysplasia was defined and classified BACKGROUND
MATERIALS and METHODS
Although most radiographs used for polyethylene wear measurements have been taken with the patient in the supine position in order to assess penetration by the femoral head into the acetabular polyethylene socket, we have questioned the effect of weight-bearing on the position of the head within the socket. The current study aimed to determine the effect of weight bearing, i.e. standing on the two-dimensional radiographic position of the femoral head within the socket. A total of three hundred and fifty patients (three hundred and eighty three hips) who had had a total hip arthroplasty had digital radiographs made a set of anteroposterior radiographs for each patient: one radiograph was made with the patient supine and one was made with the patient standing in full weight bearing on the replaced hip. The patients were divided into the following two groups: 1) seventy-five patients (eighty-three hips) with conventional polyethylene (CON) (group-1); 2) two hundred and seventy-five patients (three hundred hips) with highly cross-linked polyethylene (XPL) (group-2). The set of radiograph was taken at three weeks postoperatively and at the time of semiannual follow-up. The average ceramic femoral head penetration was measured with radiographs taken in the standing or supine position at the final follow-up and compared with those of three weeks postoperatively. A single researcher with use of a computerized measurement system performed all measurements on the radiographs of the two-dimensional position of the head. Follow-up period were 13.5 ± 1.0 (range. 11.0–15.5) years in group-1 and 7.6 ± 2.1 (range. 5.0–12.6) years in group-2.BACKGROUND:
PATIENTS AND METHODS:
Hybrid total hip arthroplasty (THA) commonly recognized as cementless hemi-spherical acetabular component combined with cemented femoral stem. We have done so called “reverse” hybrid THA with cemented socket and cementless stem and compared with all-cemented THAs. We have been collecting data on total hip arthroplasty since November, 1993. Reverse hybrid hip replacements were used mainly from February, 2001. We evaluated data on 272 reverse hybrid THAs (223 patients) from this year onward until May, 2010, and compared the results with those from 283 all-cemented THAs (237 patients) between 1993 and May, 2010. Eighty percent or more of patients had diagnosed as secondary osteoarthritis of the hip joint due to dysplasia in our hospitals. Highly cross linked ultrahigh molecular polyethylene (CLP) socket was introduced in October, 1999. We used conventional (not cross linked polyethylene) socket for 82 hips (cemented group-1) operated before October, 1999 and CLP socket for 201 hips (cemented group-2) in all-cemented cases. We used the Kaplan-Meier method for estimation of prosthesis survival and relative risk of revision. The endpoint was radiological loosening or revision. Socket linear wear rates were also assessed in radiographically. Clinical assessment was performed using the Japanese Orthopedic Association (JOA) scores and Merle d'Aubigne & Postel scores.BACKGROUND
PATIENTS AND METHODS
Acetabular defects are encountered in both primary total hip arthroplasty (THA) in patients with developmental dysplasia of the hip (DDH) and in revision THA. The purpose of this study was to evaluate the clinical and radiographic results of one method of acetabular reconstruction for THA using a hydroxyapatite (HA) block with either an autogenous graft or allograft of impacted morsellized bone in conjunction with a cemented socket. Fourteen hips in 14 patients (all female; average age, 64 years) were treated with the above technique in primary (11 DDH) or revision THA (three loosened sockets). All patients were followed clinically in a prospective fashion, and radiographs were analyzed retrospectively. One initial patient had 16-year follow-up, whereas the remaining 13 patients had follow-up between four and 5.5 years.BACKGROUND
METHODS
