In order to reduce the risk of dislocation larger femoral heads in total hip arthroplasty (THA) are being used by surgeons in recent years. The standard head size of 28 mm used in 73% of all hip procedures in 2003 was used in only 29% in 2016; whereas head sizes of 32 mm and 36 mm combined, were used in 70%. The increase of head size effectively reduces the thickness of the acetabular cup, altering the load transfer. Herein, this research work investigates the effect of increasing the femoral head size on the stresses of the periacetabular bone at two selected regions: A1 (superior) and A2 (anterior). Three Finite Element models were developed from CT scan data of a hemipelvis implanted with a cemented all-polyethylene acetabular cup with a 50 mm outer diameter and inner diameter to accommodate three head sizes: 28 mm, 32 mm and 36 mm. The peak reaction force at the hip joint during one leg stand for an overweight patient with a body weight of 100 Kg was simulated for head sizes investigated. We found that highest average von Mises stress was 5.7 MPa and occurred in the cortical bone of region A1 which is located within Zone 1 boundaries (Charnley &DeLee); whereas a lower stress of 4.0 MPa occurred at region A2. In the two regions the stresses were the same for the three head sizes. Periacetabular bone was found to be insensitive to the increase of femoral head diameter in cemented THA.
The use of larger femoral heads in Total Hip Arthroplasty has increased in order to reduce the risk of dislocation and to improve the range of motion of the joint. In 2003, within the UK, the “standard” head size of 28mm was used in 73% of all hip procedures, whereas by 2012, this figure dropped to 36%. Concerns regarding the impact of this increment in head size on the cement and bone stresses have arisen; however, this has yet to be clearly determined. To understand the relationship between femoral head size and cement mantle and bone stress in cemented hip arthroplasty, 3D-Finite-Element models of a hemipelvis with cemented cup[tb6] (50mm outer-diameter) were developed. Loading conditions of single-leg-stance (average and overweight) were simulated for three head sizes (28, 32 and 36mm). The models were validated with an in-vitro experiment using the average loading condition.Introduction
Methods
In the last years there is an increase in the interest in the study of growth factors that take part in the process of consolidation of the fracture to be used as treatment. The different types of fixations modify the natural process of the fracture healing and the production of growth factors could also be affected. There is not evidence in the literature of the effect that the intramedullary reaming has on the osteogenesis. We did a study to analyse the effect of intramedullary reaming on the production of growth factors during the process of fracture healing in the femur of rats. We did a pospective study in San Carlos Clinical Hospital from Madrid in which was made a fracture on the femur of 64 adults rats type Sprague-Dawley. The rats were divided in two main groups; each group received one different treatment: 30 rats with intramedullary nail and 34 rats did not receive any treatment. The rats of each group were sacrificed in 4 different moments: at the 24th hour, 4th, 7th and 15th days after the fracture was done, and we measured the amount of growth factors that appeared in the callus fracture, by anatomopathology study. The group in which was done the intramedullar nailing recovered normal walk after surgery. In this group were found more production of BMP and PDGF compared to the control group but did not reveal any significant difference between the groups (p>
0,05). Differences about other growth factors as TGF were not found. We conclude that in the results we have taken, the increase on BMP and PDGF could be produced by the intramedullary reaming by the surgery technique but we would need more studies.
