Advertisement for orthosearch.org.uk
Results 1 - 4 of 4
Results per page:
Applied filters
Content I can access

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 88-B, Issue SUPP_I | Pages 183 - 183
1 Mar 2006
Rubel I Corcoran A
Full Access

Introduction: Since the introduction of periarticular locking plates (PLP) open reduction and internal fixation of periarticular fractures has gained popularity. Although initial trials have shown encouraging results, no studies to date has focused on its use for metaphyseal fractures. The purpose of this study is to report on the performance of PLP for fixation of periarticular fractures.

Material and Methods: 49 with at least one year follow up were included in this prospective review. All fractures involved the metaphyseal area and 39 had an intraarticular extension as well. Fixation was performed by a combined locking-regular screws technique. The parameters included in the analysis were fracture displacement, type of callus formation, healing of the fracture, screw pull-out, screw breakage, plate breakage, stress rising and stress shielding with subsequent bone loss.

Results: At one year follow up the results showed that: 1 fracture had lost reduction in the early post op; 2 locking screws had backed up despite being initially locked to the plate; 1 screw broke, 1 plate broke. There were no problems with stress rising or stress fractures at the end of the plate. The most impressive finding was the high rate of stress shielding with subsequent bone loss within the range delimited by the locking screws (27 %). Callus formation: 18 % had no visible callus on plain radiographs despite being clinically healed. 62% had very little callus. 15 % had moderate callus and 5% had robust callus formation.

Discussion and conclusion: The use of PLP appears to have some unique characteristics, different than conventional plating.: 80 % of the fractures healed with no or very little callus. The use of locking screws in the shaft portion of the fixation may have been the cause for the high rate of stress shielding, which typically occurred within the locking screws in our series. Since the review of our data we are no longer using locking screws in the shaft portion of the fixation.


Orthopaedic Proceedings
Vol. 88-B, Issue SUPP_I | Pages 30 - 30
1 Mar 2006
Rubel I Fornari E Miller B Hayes W
Full Access

Introduction: The use of self-tapping screws has become increasingly popular since it allows for a rapid screw placement avoiding the tapping step during ORIF of fractures.. While sharing the same basic principle of cutting flutes and partial threads at the tip, at least four types of screw design is currently available, varying in the number and shape of cutting flutes. The purpose of this biomechanical study was to research for any significant difference between the various self-tapping screws

Material and Methods: Three different designs of 4.5-mm self-tapping screws and one standard 4.5 screw serving as control were compared for pull-out strength after insertion into an adult human non-embalmed cadaveric humeri. All specimens were machined to a 5 mm uniform cortical thickness. Four equidistant 3.2 mm holes were drilled into each specimen by an MTS mounted drill. All screws were inserted randomly in one of the four positions using a hand screwdriver. The cortical bone specimen was secured between two metal plates to the base of a MTS machine while a uniaxial tensile force was applied to the jig for screw removal at a rate of 0.833 mm/sec until holding power had decreased to 25 % of the maximum. Load displacement curves were recorded. Resulting data was analyzed using paired student-t tests. P values of less then 0.05 were considered statistically significant.

Results: The mean load-to-failure was 97.4167N (S.D. 13.29924) for the Synthes control screw, 69.2333N (S.D. 4.48360) for the Synthes self-tapping screw, 67.15 (S.D. 11.23864) for the Stryker self-tapping screw, and 55.0667 (S.D. 8.59271) for the ODI self-tapping screw. A significant difference was found between the mean pull-out strength of the Synthes control screw when compared to each of the three self-tapping screws (Pairs 1–3, P < 0.05). Furthermore, the mean pull-out strength of the ODI self-tapping screw was found to be significantly less than Stryker self-tapping screw (Pair 6, P < 0.05). There was no significant difference between Synthes self-tapping screws and Stryker self-tapping screws (Pair 5, P < 0.05).

Discussion and conclusion: Self tapping screws with three short cutting flutes performed better than those with two long cutting flutes. Despite of the different designs and length of the cutting flutes in self-tapping screws, they all have less pull out strength than regular screws


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_III | Pages 316 - 316
1 Mar 2004
Gimenez M Sancineto C Rubel I Barla J
Full Access

Aims: The purpose of this presentation is to report our protocol for staged exchange nailing of delayed-unions and non-unions of the tibia complicated by multifocal osteomyelitis from infected pin tracts. Methods: Twenty-four patients with delayed or non-union of the tibia initially treated by external þxation were retrospectively reviewed. Fifteen males and 9 females with an average age of 40 years (range 20–74) and at least 1 year of follow up (range 1–7). External þxation was maintained until the soft tissues healed. External þxation time averaged 116 days (range 28–288). Multiple gross pin tract infection developed in all the casesl. Non-unions and delayed-unions were treated by exchange reamed intramedullary nailing. The exchange protocol consisted in the removal of the external þxator, debridement and culture of bone from the pin sites, cast immobilization, speciþc IV antibiotics for 6 weeks, and a negative post-antibiotics biopsy. Outcome measurements included recurrence of infection and healing of the delayed union or non-union. Results: Twenty-three of the fractures healed at the þrst nailing attempt on an average time of 4 months (range 2–7). One case required re-nailing at 4 months and þnally healed at 6 months from the initial procedure. No recurrence of deep infection was identiþed. Two patients developed superþcial infections, suppressive antibiotics were used until complete bone healing and subsequent nail removal. Discussion: By using our staged protocol we were able to perform exchange nailing for non-unions and delayed unions of the tibia complicated by multiple foci osteomyelitis from infected pin tracts with a considerable rate of success.


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_III | Pages 374 - 375
1 Mar 2004
Sancineto C Rubel I Barla J
Full Access

Aims: Present our experience with a protocol for acute Ç gradual È femoral distraction for post- traumatic femoral shotening. Methods: Six females and four men with an average age of 35 y/o with al least one year follow-up and an average shortening of 4.5 cm (range 3–6). A butterßy osteotomy was performed at the diaphysary-subtrochanteric level. A femoral distractor was applied to the lateral side of the femur. An antegrade femoral intramedullary nail was then inserted and locked proximally. The patients were admitted to the orthopaedic ßoor and distraction started the same day under clinical monitoring of the neurovascular status. When the desired length was achieved, intrelocking was completed and the femoral distractor removed. Limb length was evaluated with scanograms. Radiographic healing was deþned as bridging callus at both sides of the osteotomy on AP, lateral and oblique views. Range of motion was evaluated at the one year follow-up visit. Results: Lenghening averaged 4.2 cm (range 2.7–6). Distraction period averaged 6 days (range 3–12). Distraction rate averaged 7 mm a day (range 3–11). Average healing time was 5 months (range 2–11). Shanz pins bent in 6 cases. Pin tract superþcial infections were identiþed in 3 cases. All infections subsided with oral antibiotics and no deep infection was detected. No nails or interlocking screws breakage were detected. Conclusion: Lengthening of the femur over a intramedullary nail is better to other tecniques. The butterßy osteotomy splits the distraction gap in halves, decreasing the risk of non-union and comlications reported for acute lengthenings. Lengthening of the femur up to 6 cm was possible in this series of patients following this protocol for acute Ç gradual Èdistraction over an intramedullary nail.