Purpose of the study: Treatment of supra- and inter-condylar fractures of the femur remains a difficult challenge, irrespective of the method used, because of the high risk of infection, disassembly, nonunion, joint stiffness, osteoarthritis, and multiple operations. Use of a supracondylar retrograde nail, accepted for C1 and C2 fractures, can be used for some C3 fractures depending on the stability of the epidphyseal assembly.

Material and methods: This series included 19 C3 fractures (AO classification) operated on in 1993–2000. Mean patient age was 54 years (range 30–81), 11 females and 8 males. This consecutive series of patients had: high energy trauma (n=14), low-energy trauma (n=5), multiple fractures (n=16), open fractures (n=10). Osteo-synthesis was performed on an ordinary table in the dorsal supine position with arthrotomy and epiphyseal screw and pin fixation followed by static supracondylar retrograde nailing (Smith and Nephez GHS), completed in two cases with an autologous corticocancellous graft. Kinetec was used for mobilization and weigh bearing delayed until bone healing.

Results: Twelve secondary operations were performed: cover with muscle flap (n=1), early revision for rotation misalignement (n=1), autologous graft (n=4), surgical arthrolysis (n=6), revision for nonunion (n=4). There were no infections. Among the four cases of nonunion, three involved epiphyseal screw failure, two cases having involved grafts. All four cases were treated by decortication, graft and plate fixation; healing was achieved. Mean time to bone healing per primam was 23 weeks on average. The 19 patients were examined at mean 44 months follow-up (range 16–78 months). Pain was noted: absent (n=8), mild (n=3), moderate (n=6), severe (n=2). Gait was noted: normal (n=7), slight limp (n=9), important limp (n=3). Mean flexion was 114° (range 85–150°). Five cass had permanent flexion < 10°. Radiologically, misalignment of +5° in the frontal plan was observed in six cases.

Discussion: Retrograde nailing of C3 fractures is difficult, but possible and requires first epiphyseal fixation then diaphyseal solidarization. The assembly is reliable, allowing immediate mobilization. Weight bearing must however be delayed to bone healing. Complementary surgery to graft bone stock or for relative arthrolysis has to be integrated into the operative plane for more than half of these difficult cases.

Purpose: The purpose of this work was to validate the most reliable technique for obtaining ligament isometry of the knee in flexion.

Material and methods: This prospective series of non-cemented non-posterior stabilised Interax knee prostheses (Howmedica) implanted by the same surgeon included 57 genu varum knees with degenerative disease. Mean preoperative femorotibial varus was 8.23°. Landmarks used intraoperatively included the posterior condylar line (PCL), the biepicondylar line (BECL) and the Whiteside line (WL). Ligament balance was measured with the Derby tensor.

Results: The first part of the assessment concerned ligament balance in extension. Mean initial medial retraction, measured with the tensor, was 3.6°. Release of the concavity was performed in 62% of the knees with mean residual retraction of 1°. The second time was to evaluate balance at 90°. Using the anatomic landmarks, the PCL was parallel to the BECL in 22% of the knees and perpendicular to the WL in 26%. There was a weak angulation in 28% and 30% of the knees and in 50% and 44% respectively. There was thus a strong correlation intra-operatively between these two landmarks and the initial radiographic varus. Evaluation with the tensor showed mean 2.96° medial retraction. The correlation between the anatomic measures and the tensor ligament measures was very significant. When the BECL was parallel to the PCL, medial retraction with the tensor was 1.12°. The angulation was small, 2.25°. When the angle was wide, the mean measure was 4.4°. We found the same results with the WL. External rotation of the anteroposterior femoral cut was then guided by these different measures. It was 2.6° on average (0–6°). Residual medial retraction, measured with the tensor, was thus significantly improved, only 0.4° on average (−2 to +2).

Discussion: After ligament rebalancing in extension, there persisted frequently an imbalance in flexion (62%). This was independent of the preoperative varus. It was corrected by external rotation of the femoral implant, the value assess approximately from the landmarks. It was measured in our hands reliably with the Derby ligament tensor.

Purpose: Osteolysis is one of the important issues during the life of noncemented total hip arthroplasty (THA). The purpose of this study was to evaluate a series of 228 THA using an ABG-1 implant to determine the incidence of osteolysis and contributive factors.

Material and methods: This series of 228 THA using noncemented ABG-1 anatomic implants coated with hydroxyapatite was implanted in 210 patients, 116 women and 112 men, mean age 62.2 years. The indication was primary osteoarthritis (53.6%), primary necrosis (21.5%), posttraumatic osteoarthritis (11.8%), rheumatoid disease (8.3%) and hip dysplasia (4.8%). The bearings were, 200 zirconium-polyethylene (87.7%), 28 metal-polyethylene (12.3%). At mean 88.6 months follow-up, a minimum 60 months postoperatively, we reviewed 163 patients (37 patients died without revision, 28 (12.3%) were lost to follow-up, and 17 had undergone a revision procedure). We analyzed osteolysis on the digitalized radiograms using the Delee-Charnley classification to which we added a fourth retroacetabular zone. Polyethylene wear was measured with the Imagika(r) software using the method described by Martell.

Results: The 17 cup revisions (8.5%) were required for instability (4 pt), loosening (4 pt), osteolysis (4 pt), infection (3 pt), and limping (1 pt). Overall implant survival was 92.1%. Implant survival, considering loosening and osteolysis as failure, was 96.1%. Mean wear at last follow-up was 1.26 mm, for an annual average of 0.17 mm (0.04 – 0.69 mm/yr). Acetabular osteolysis was observed in 41.6% of cases, mainly in the Delee-Charnley zone 1, but was also found in all the other zones. The average surface area was an estimated 223 mm2. Possible factors favoring osteolysis were: aetiology, age, gender, activity level, body mass index, Charnley ABC classification, presence of preoperative acetabular defects, cup size, polyethylene insert thickness, position of the insert rim, cup inclination, complementary fixation, bearing type, polyethylene offset and wear. There was a statistically significant relationship between osteolysis and: the Charnley classification (p=0.012), presence of preoperative acetabular defects (p=0.0034), cup inclination angle (p=0.035), cup size (p=0.042), polyethylene thickness (p< 0.01), use of complementary fixation (p=0.048), and polyethylene wear (p=0.0011). Paradoxically, we did not find any relationship with gender, age, body mass index, and the other factors.

Discussion: This analysis demonstrated the determining causes of osteolysis: time, polyethylene thickness, polyethylene wear, the Zicronium-polyethylene bearing. Wear was probably not only the consequence of the Zicronium-polyethylene bearing but was also related to the quality of the polyethylene, and the instability of the insert. Diffuse osteolysis is favored by orifices in the first-generation cups which have been eliminated in the ABG-2 cups.

Purpose: The purpose of this work was to evaluate the mid-term behaviour of 228 ABG-1 femoral stems implanted without cement in patients with at least five years follow-up.

Material and methods: The series included 228 ABG-1 (cup and femur) non-cemented hydroxyapatite-coated anatomic total hip prostheses implanted in 210 patients. Mean age was 62.2 years, 116 women, 112 men. Indications were: primary degenerative disease (53.6%), primary necrosis (21.5%), posttraumatic osteoarthritis (11.8%), rheumatoid disease (8.3%) and dysplasia (4.8%). A zincronium-polyethylene bearing was used for 200 hips (87.7%) and metal-polyethylene for 28. We retained for analysis 163 patients with mean 88.6 months follow-up [37 died without revision, 28 lost to follow-up (12.3%), 17 surgical revision]. The Postel Merle d’Aubigné (PMA) and Harris Hip Score (HHS) were noted. Radiographically, the AGORA Engh-Massin and ARA femur scores were determined; osteolysis was evaluated with the Gruen classification.

Results: The seventeen femoral revisions were related to aseptic loosening (n=4), fracture of the femur (n=4), sepsis (n=3), instability (n=3), pain (n=2), and limping (n=1). Overall survival was 92.5% at 88.6 months, relative survival (loosening) was 98.2%. At last follow-up, the PMA score was 17.3 and 92.7% of the patients had an excellent or good outcome (PMA > 14). The mean HHS was 96.4. Ninety-six percent of the patients were pain free. Radiologically, 112 stems were evaluated at last follow-up. The Engh-Massin classification showed that 102 stems presented certain bone ingrowth (85.2%), 15 suspected (12.3%), and two showed fibrous encapsulation with one case of implant instability. The ARA femur score was good or excellent in 70.5%, fair in 13.1%, poor in 16.4%. Hypertrophic cortical reaction was noted in Gruen zones 2–3 or 5–6 in 27.9% and was not correlated with pain. These reactions were however associated in more than half of the cases with a position anomaly in the frontal plan or an oversized stem. There was on incomplete pedestal and no extensive proximal stress shielding. Femoral osteolysis was very limited (mean surface area 145 mm2) in zones 1 and 7 in 21.3% of the cases. There were no cases of distal osteolysis.

Discussion: These data confirm the very good mid-term behaviour of the anatomic stems coated with hydroxyapatite. This metaphyseal coating acts like a barrier preventing diffusion of wear particles along the shaft. Stem migration was minimal, to the order of one millimetre, and did not continue beyond the first year. Over time, a constant trabecular metaphyseal endocortical bone reaction was observed, reflecting stress transmission to the proximal portion of the hydroxyapatite-coated femoral implant.