By contrast, worldwide Register data refer to 733,000 primary operations, i.e. approximately 10 times as many as sample-based datasets. In general, sample-based datasets present higher revision rates than register data. The deviations are high, with a maximum factor of 64 for hip stems. Whereas the AAHKS survey exhibits lower deviations than the monocentre trials, they are still too high for this data collection tool being considered as reliable and safe to provide valid data for general conclusions. The incidence of implant fractures after total hip arthroplasty in pooled worldwide arthroplasty register datasets is 304 fractures per 100.000 implants. In other words, one out of 323 patients has to undergo revision surgery due to an implant fracture after THA in their lifetime.
For the detection of rare, but severe complications like implant fractures sample-based studies achieve the goal of providing accurate figures only to a very limited extent, even if the samples are large. Here, too, comprehensive national arthroplasty registers are the most suitable tool to identify such incidents and calculate reliable figures. Contrary to the prevalent opinion, implant fractures still are a relevant problem in arthroplasty.
Compared to other implants for unicompartmental knee arthroplasty in worldwide arthroplasty Registers, the Oxford Uni shows good results. For the assessment of the outcome of implants, register data are to be rated superior and, in terms of reference data for the detection of potential bias factors in the clinical literature, can provide an essential contribution for scientific meta-analyses.
The average revision rate in peer reviewed literature is significantly lower than in arthroplasty register data-sets. Studies published by the inventor of an implant tend to show superior outcome compared to independent publications and Arthroplasty Register data. Factors of 4 to more than 10 have been found, which has a significant impact for the results of Metaanalyses. When an implant is taken from the market or replaced by a successor there is a significant decrease in publications, which limits the detection of failure mechanisms such as PE wear or insufficient locking mechanisms. The final statement made about the product under investigation seem to follow a certain mainstream.