Introduction. Subtle deformities of the acetabulum and proximal femur are recognised as biomechanical risk factors for the development of hip osteoarthritis (OA) as well as a cause of hip and groin pain. We undertook this study to examine relationships between a number of morphological measurements of the acetabulum and proximal femur and the hip pain in a 20-year longitudinal study. Methods. In 1989 women of 45–64 years of age were recruited. Each had an AP-Pelvis radiograph at Year-2. These radiographs were analysed using a validated programme for measuring morphology. All morphological measurements were read blinded to outcome. At year 3 all participants were asked whether they experienced hip pain (side specific). This was repeated at visits up to and including 20-years. Logistic regression analysis (with robust standard errors and clustering by subject identifier) was performed using hip pain as a binary outcome. The model adjusted for baseline age, BMI and joint space and included only participants who were pain free on initial questioning. Results. 743 participants were included in the analysis. Median age 74.0. Pain was reported in 14.2% of hips. Logistic regression analyses revealed that extrusion index and LCE were significantly associated with hip pain before and after adjusting for covariates (OR 4.88[95%CI 1.32–17.97, p=0.017] and 0.84[95%CI 0.74–0.96, p=0.012] respectively). Modified triangular index height (MTIH) was also significantly associated after adjusting for covariates (OR 1.10[95%CI 1.01–1.20, p=0.022]). Extrusion index and MTIH were independently associated with hip pain at 20-years when used in the same model. No significant interaction was identified. Conclusions. This study provides evidence that measurements of hip morphology characteristic of previously undiagnosed dysplasia and FAI are predictive of hip pain in a 20-year longitudinal study. MTIH, LCE and Extrusion index were significant predictors of pain. This is the first study to describe these associations between hip morphology and pain in a longitudinal cohort

Femoroacetabular impingement recently was recognized as cause for osteoarthritis of the hip. There are two mechanism of impingement: (1) cam impingement caused by a non-spherical head, and (2) pincer impingement due to acetabular overcover. We hypothesized that both mechanism result in different articular damage patterns. Of 302 analyzed hips only 26 had an isolated cam and 16 an isolated pincer impingement. Cam impingement caused anterosuperior acetabular cartilage damage with a separation between labrum and cartilage. During flexion the cartilage is sheared off the bone by the non-spherical part of the femoral head. In pincer impingement the cartilage damage was located circumferentially, invovolving only a narrow strip along the acetabular rim. During motion the labrum is crushed between the acetabular rim and the femoral neck causing degeneration and ossification of the labrum.

Cam and pincer impingement are two basic mechanism that lead to osteoarthrosis of the hip. The articular damage pattern differs substantially. Isolated cam or pincer impingement is rare, in most hips a combination is present. Labral damage indicates ongoing impingement and rarely occurs alone.

Introduction: Subtle deformity of the hip joint may cause osteoarthritis. In femoroacetabular impingement (FAI), cam deformities damage acetabular cartilage. Whether surgical removal of cam lesions halts progression is unknown. Sensitive, non-invasive assays of chondral damage are required to evaluate early treatment efficacy.

Delayed gadolinium-enhanced MRI of cartilage (dGEMRIC) permits inference of glycosaminoglycan (GAG) distribution. We aimed to determine whether hips with cam deformities have altered GAG content, using dGEMRIC.

Methods: Subjects were recruited from a prospective cohort study. All were clinically and radiographically assessed. Hips with a normal joint space width (> 2.5mm) were eligible for dGEMRIC. 32 Hips (18 male, 14 female, mean age 51.7 years, none of whom had been investigated for hip pain) with (n=21) and without (n=11) cam deformities were scanned.

2 regions of interest (ROI) were studied:

acetabular cartilage from 12 to 3 O’Clock (T1-Index-acet).

The average of all pixels within the given ROI defined the T1-index.

For each hip, the ratio of the GAG content T1-Index-acet/T1-Indextotal was calculated. Mean T1-Indexto-tal and T1-Indexacet/T1-Indextotal were compared.

Results: T1-Indextotal were similar (689ms v 700ms, p=0.79) but T1-Indexacet/T1-Indextotal was lower in cam hips (0.93 v 1.01, p=0.017), indicating localised depletion of GAG content. Cam hips with positive clinical signs had lower T1-Indextotal than cam hips without (629ms v 717ms, p=0.055), and non-cam hips (629ms v 722ms, p=0.049).

Discussion: Cam hips have lower GAG content of their anterosuperior acetabular cartilage. dGEMRIC identified more generalised disease in cases with positive clinical findings. Ratios of GAG content for specific ROIs enable mapping of chondral damage. This may aid understanding of early disease mechanisms, track progression, and facilitate assessment of the efficacy of surgical procedures.

Abstract. Background. Femoroacetabular impingement (FAI) has been extensively investigated and is strongly associated with athletic participation. The aim of this systematic review is to assess: the prevalence of cam-type FAI across various sports, whether kinematic variation between sports influences hip morphology, and whether performance level, duration and frequency of participation or other factors influence hip morphology in a sporting population. Methods. A systematic search of Embase, PubMed and the Cochrane Library was undertaken following PRISMA guidelines. The study was registered on the PROSPERO database (CRD4202018001). Prospective and retrospective case series, case reports and review articles published after 1999 were screened and those which met the inclusion criteria decided a priori were included for analysis. Results. The literature search identified 58 relevant articles involving 5,683 participants. Forty-nine articles described a higher prevalence of FAI across various ‘hip-heavy’ sports, including soccer, basketball, baseball, ice hockey, skiing, golf and ballet. In studies including non-athlete controls, a greater prevalence of FAI was reported in 66.7% of studies (n=8/12). The highest alpha angle was identified at the 1 o'clock position (n=9/9) in football, skiing, golf, ice hockey and basketball. Maximal alpha angle was found to be located in a more lateral position in goalkeepers versus positional players in ice hockey (1 o'clock vs 1.45 o'clock). A positive correlation was also identified between the alpha angle and both age and activity level (n=5/8 and n=2/3, respectively) and also between prevalence of FAI and both age and activity level (n=2/2 and n=4/5), respectively. Conclusions. Hip-heavy sports show an increased prevalence of FAI, with specific sporting activities influencing hip morphology. Both a longer duration and increased level of training also resulted in an increased prevalence of FAI

Executing an extended retinacular flap containing the blood supply for the femoral head, reduction osteotomy (FHO) can be performed, increasing the potential of correction of complex hip morphologies. The aim of this study was to analyse the safety of the procedure and report the clinical and radiographic results in skeletally mature patients with a minimum follow up of two years. Twelve symptomatic patients (12 hips) with a mean age of 17 years underwent FHO using surgical hip dislocation and an extended soft tissue flap. Radiographs and magnetic resonance imaging producing radial cuts (MRI) were obtained before surgery and radiographs after surgery to evaluate articular congruency, cartilage damage and morphologic parameters. Clinical functional evaluation was done using the Non-Arthritic Hip Score (NAHS), the Hip Outcome Score (HOS), and the modified Harris Hip Score (mHHS). After surgery, at the latest follow-up no symptomatic avascular necrosis was observed and all osteotomies healed without complications. Femoral head size index improved from 120 ± 10% to 100 ± 10% (p<0,05). Femoral head sphericity index improved from 71 ± 10% before surgery to 91 ± 7% after surgery (p<0,05). Femoral head extrusion index improved from 37 ± 17% to 5 ± 6% (p< 0,05). Twenty five percent of patients had an intact Shenton line before surgery. After surgery this percentage was 75% (p<0,05). The NAHS score improved from a mean of 41 ± 18 to 69 ± 9 points after surgery (p< 0,05). The HOS score improve from 56 ± 24 to 83 ± 17 points after surgery (p< 0,05) and the mHHS score improved from 46 ± 15 before surgery to 76 ± 13 points after surgery (p< 0,05). In this series, femoral head osteotomy could be considered as safe procedure with considerable potential to correct hip deformities and improve patients reported outcome measures (PROMS). Level of evidence - Level IV, therapeutic study. Keywords - Femoral head osteotomy, Perthes disease, acetabular dysplasia, coxa plana

Clinical graphics allows creation of three dimensional simulation based on CT or MRI that allows pre-operative planning. The software reports several hip morphological parameters routinely. Our aim was to validate the measurements of acetabular morphological parameters using CT based clinical graphics in patients presenting with symptomatic hip pain. We reviewed standardised plain radiographs, CT scans and 3D clinical graphics outputs of 42 consecutive hips in 40 patients presenting with symptomatic hip pain. Acetabular index (AI), lateral centre edge angle (LCE), acetabular and femoral version measurements were analysed for the 3D clinical graphics with radiographs and CT as gold standard. Significant differences were noted in measurements of AI, LCE, acetabular version and femoral version using the 3D motion analysis versus conventional measures, with only acetabular version showing comparable measurements. Correlation between 3D clinical graphics and conventional measures of acetabular morphology (AI, LCE) showed only slight agreement (ICC <0.4); while substantial agreement was noted for acetabular and femoral version (IC > 0.5). Acetabular morphological parameters measured by 3D clinical graphics are not reliable or validated. While clinicians may pursue the use of 3D clinical graphics for preoperative non-invasive planning, caution should be exercised when interpreting the reports of hip morphological parameters such as AI and LCE

Background. Cam morphology develops during adolescence and predisposes individuals to future hip pain and osteoarthritis. An improved understanding of cam development is required to determine whether the process is modifiable. Hypothesis/Purpose. The aim of this study was to characterise the risk factors, timing, and pathogenesis of cam formation. Study Design. Longitudinal prospective observational cohort study. Methods. Longitudinal observational cohort study over three years of individuals from football club academies and an age-matched control population, aged 9–18 years at baseline. Assessments include questionnaires, clinical examination, and MRI of both hips. Alpha angle and epiphyseal extension were measured on radial images. Results. Cohort comprised male academy footballers (121 at baseline and 78 at follow-up) and male and female controls (107 at baseline and 71 at follow-up). Mean change in cartilage alpha angle was 12.4° (SD 8.4) for footballers, 7.3° (SD 6.0) for male controls and 4.0° (SD 4.1) for female controls. A positive correlation was found between Physical Activity Questionnaire Score and change in cartilage alpha angle (coefficient 0.787, p=<0.001). The greatest change in cartilage alpha angle occurred in individuals aged 11–12 years at baseline, with no significant change after 14 years of age. A positive correlation between mean cartilage alpha angle and lateral epiphyseal extension was observed (r. 2. = 0.294, p=0.029). Conclusions. Males undertaking intense sporting activity during adolescence at greatest risk of developing cam morphology, but there is no significant change in hip morphology after 14 years of age. The findings are consistent with physiological adaptation and epiphyseal extension in response to hip loading during skeletal immaturity

Traumatic hip dislocation is a rare injury in orthopaedic practice and typically occures in high energy trauma. The goal of this study was to analyze hip morphology in patients with low energy traumatic hip dislocations and to compare it with a control group. We performed a retrospective comparative study. The study group included 45 patients with 45 traumatic posterior hip dislocation. Inclusion criteria were traumatic hip dislocation with simple acetabular rim or Pipkin I or II fracture. Traumatic dislocations combined with other acetabular or femoral fractures were excluded. The control group consisted of 90 patients (180 hips) that underwent radiographic examination for urogenital indication and had no history of hip pain. Hip morphology was assessed on antero-posterior and axial views. The study group showed significantly increased incidence (p<0.001) of positive cross-over sign (82% vs. 27%) with a increased retroversion index (26 ± 17 [0–56] vs. 6 ± 12 [0–53]), positive ischial spine sign (70% vs. 34%), and positive posterior wall sign (79% vs. 21). Hips that underwent an low energy posterior traumatic hip dislocation show significanly more radiographic signs for acetabular retroversion compared to a control group. Therefore, acetabular retroversion seems to be a contributing factor for posterior traumatic hip dislocation

An increased prevalence of osteoarthritis (OA) in post-menopausal women has led to the suggestion that hormonal factors may play a role in the pathogenesis. This study aims to examine if undergoing a hysterectomy, both with retention and removal of ovaries, predisposes women to OA and secondly if the development is influenced by hormone replacement therapy (HRT). Statistical shape modelling (SSM) is a method of image analysis allowing for detection of subtle shape variation described by landmark points. Through the generation of linearly independent modes of variation, each image can be described in terms of numerical scores. 149 radiographs from female participants of the Osteoarthritis Initiative (OAI) were examined to compare hip morphology in those who had undergone hysterectomies compared to controls. No differences were observed in BMI, age, height or weight between groups. ANOVA and Games-Howell post-hoc analysis showed that modes 3 and 5 were statistically significant. Lower mode 3 scores were associated with hysterectomy (p=0.019), with narrowing of the femoral neck and increased acetabular coverage. Lower mode 5 scores were associated with hysterectomy and oophorectomy (p=0.049), displaying reduced coverage of the femoral head, superolateral migration of the femoral head and larger greater trochanter. No associations were observed between HRT use and OA. The subtle morphologic features of hip OA present in only hysterectomised women suggests undergoing a hysterectomy may be a predisposing factor and a clinical consideration. The use of HRT was not observed to influence the development of OA and thus cannot be suggested as a protective measure

The December 2013 Children’s orthopaedics Roundup. 360. looks at: Long term-changes in hip morphology following osteotomy; Arthrogrypotic wrist contractures are surgically amenable; Paediatric femoral lengthening over a nail; Current management of paediatric supracondylar fractures; MRI perfusion index predictive of Perthes’ progression; Abduction bracing effective in residual acetabular deformity; Hurler syndrome in the spotlight; and the Pavlik works for femoral fractures too!

Introduction. Subtle variations in hip morphology associate with risk of hip osteoarthritis (OA). However, validated accurate methods to quantitate hip morphology using plain radiography are lacking. We have developed a Matlab-based software-tool (SHIPs) that measures 19 OA-associated morphological-parameters of the hip using a PACS pelvic radiograph. In this study we evaluated the accuracy and repeatability of the method. Methods. Software accuracy was assessed by firstly measuring the linear ratio of 2 fixed distances and several angles against a gold-standard test radiograph, and secondly by repeated measurements on a simulated AP radiograph of the pelvis (reformatted from CT-data) that was digitally rotated about 3-axes to determine the error associated with pelvic mal-positioning. Repeatability was assessed using 30-AP Pelvic radiographs analysed twice (intra-observer), by 2 readers (inter-observer), and finally, using 2 pelvic radiographs taken in 23 subjects (n=46 radiographs) taken same day after re-positioning (short-term clinical-practice variability), and was expressed as coefficient of variation (CV%). Results. Software accuracy was 0.1% for linear measurements, and 0.2, 0.4, and 0.1 degrees, for angular measurements of 30, 60, and 90 degrees, respectively. Anterior rotation of the pelvis in the sagittal plane beyond 10 degrees produced a decrease in acetabular-tilt (-11 degrees at 20 degrees rotation) and acetabular-index-of-depth-to-width-ratio (-9.3% at 20 degrees rotation). Conversely, femoral-head-to-neck-ratio increased with both anterior and transverse rotation (+9% to +14% at 20 degrees rotation). The intra-observer CV was between 0.3-6.3%, and inter-observer CV was between 0.7-14.9% for all measurements with the exception of the measurement of horizontal-toit-externa (HTE) that had intra and inter-observer CVs of 33.4 and 29.1%, respectively. Short-term clinical repeatability was between 0.4-8.5%, with the exception of HTE that was 20.7%). Discussion. This software showed good accuracy and precision for the measurement of OA-associated hip morphological-parameters from plain radiographs of the pelvis, and may be useful in clinical research studies quantitating the relationship of these parameters to the development of hip OA. The method is, however, sensitive to large variations in pelvic positioning and use of the HTE measurement is associated with poor repeatability that is likely due to poor definition of the bony landmarks used for this parameter

Aims

The present study seeks to investigate the correlation of pubofemoral distances (PFD) to α angles, and hip displaceability status, defined as femoral head coverage (FHC) or FHC during manual provocation of the newborn hip < 50%.

Aims

The aim of this study was to investigate whether anterior pelvic plane-pelvic tilt (APP-PT) is associated with distinct hip pathomorphologies. We asked: is there a difference in APP-PT between young symptomatic patients being evaluated for joint preservation surgery and an asymptomatic control group? Does APP-PT vary among distinct acetabular and femoral pathomorphologies? And does APP-PT differ in symptomatic hips based on demographic factors?

Aims

Femoroacetabular impingement (FAI) patients report exacerbation of hip pain in deep flexion. However, the exact impingement location in deep flexion is unknown. The aim was to investigate impingement-free maximal flexion, impingement location, and if cam deformity causes hip impingement in flexion in FAI patients.

Aims

Research on hip biomechanics has analyzed femoroacetabular contact pressures and forces in distinct hip conditions, with different procedures, and used diverse loading and testing conditions. The aim of this scoping review was to identify and summarize the available evidence in the literature for hip contact pressures and force in cadaver and in vivo studies, and how joint loading, labral status, and femoral and acetabular morphology can affect these biomechanical parameters.

Developmental dysplasia of the hip (DDH) represents a heterogeneous group of deformities that are commonly associated with secondary osteoarthritis. Affected hips may require total hip arthroplasty (THA) for endstage disease and these cases can present unique challenges for the reconstructive surgeon. While the severity of deformity varies greatly, optimizing THA can be challenging even in the “mildly” dysplastic hip. These disorders are commonly characterised by acetabular deficiency with inadequate coverage of the anterolateral femoral head and proximal femoral abnormalities including excessive femoral antetorsion, coxa valga and femoral stenosis. In more severe cases, major femoral head subluxation or dislocation can add additional complexity to the procedure. In addition to the primary deformities of DDH, secondary deformities from previous acetabular or proximal femoral osteotomies may also impact the primary THA. Primary THA in the DDH hip can be optimised by detailed understanding of the bony anatomy, careful pre-operative planning, and an appropriate spectrum of techniques and implants for the given case. This presentation will review the abnormal hip morphologies encountered in the dysplastic hip and will focus on the more challenging aspects of THA. These include acetabular reconstruction of the severely deficient socket and in the setting of total dislocation, femoral implant procedures combined with corrective osteotomy or shortening, and issues related to arthroplasty in the setting of previous pelvic osteotomy. Despite the complexity of reconstruction for various dysplastic variants the clinical outcomes and survivorship of these procedures are good to excellent for most patients. Nevertheless, more complex procedures are associated with an increased complication rate and this should be considered in the surgical decision-making process

Introduction. A deep squat (DS) is a challenging motion at the level of the hip joint generating substantial reaction forces (HJRF). During DS, the hip flexion angle approximates the functional range of hip motion. In some hip morphologies this femoroacetabular conflict has been shown to occur as early as 80° of hip flexion. So far in-vivo HJRF measurements have been limited to instrumented hip implants in a limited number of older patients performing incomplete squats (< 50° hip flexion and < 80° knee flexion). Clearly, young adults have a different kinetical profile with hip and knee flexion ranges going well over 100 degrees. Since hip loading data on this subgroup of the population is lacking and performing invasive measurements would be unfeasible, this study aimed to report a personalised numerical model solution based on inverse dynamics to calculate realistic in silico HJRF values during DS. M&M. Fifty athletic males (18–25 years old) were prospectively recruited for motion and morphological analysis. DS motion capture (MoCap) acquisitions and MRI scans of the lower extremities with gait lab marker positions were obtained. The AnyBody Modelling System (v6.1.1) was used to implement a novel personalisation workflow of the AnyMoCap template model. Bone geometries, semi-automatically segmented from MRI, and corresponding markers were incorporated into the template human model by an automated nonlinear morphing. Furthermore, a state-of-the-art TLEM 2.0 dataset, included in the Anybody Managed Model Repository (v2.0), was used in the template model. The subject-specific MoCap trials were processed to compute squat motion by resolving an overdeterminate kinematics problem. Inverse dynamics analyses were carried out to compute muscle and joint reaction forces in the entire body. Resulting hip joint loads were validated with measured in-vivo data from Knee bend trials in the OrthoLoad library. Additionally, anterior pelvic tilt, hip and knee joint angles were computed. Results. A preliminary set of results (20 out of 50 subjects) was analysed. The average HJRF was 3.42 times bodyweight at the peak of DS (95% confidence interval: 2.99 – 3.85%BW). Maximal hip and knee flexion angles were 113° (109.7°–116.8°) and 116° (109.4 – 123.0°) respectively. The anterior pelvic tilt demonstrated a biphasic profile with peak value of 33° (28.1° – 38.4°). Discussion. A non-invasive and highly personalised alternative for determining hip loading was presented. Consistently higher HJR forces during DS in young adults were demonstrated as opposed to the Orthoload dataset. Similarly, knee and hip flexion angles were much higher, which could support the increase in HJRF. We can conclude that DS hip kinetics in young adults clearly differ from the typical total hip arthroplasty population

Introduction. Hips following in-situ pinning for slipped capital femoral epiphysis (SCFE) have an altered morphology of the proximal femur with cam type deformity. This deformity can result in femoroacetabular impingement and early joint degeneration. The modified Dunn procedure allows to reorientate the slipped epiphysis to restore hip morphology and function. Objectives. To evaluate (1) hip pain and function, (2) 10-year survival rate and (3) subsequent surgeries and complications in hips undergoing modified Dunn procedure for SCFE. Methods. Between April 1998 and December 2005 we performed the modified Dunn procedure for 43 patients (43 hips) with SCFE. Twenty-five hips (58) presented with an acute or acute on chronic slip. The mean slip angle was 43° (range, 15° – 80°). A majority of 53% of procedures were performed in male patients and the mean age at operation was 13 years (10 – 19 years). We could followup all except one hip (followup of 5.5 year) for a minimum of 10 years (mean followup 13 [10 – 18 years]). We used the anterior impingement test to assess pain and the Merle d'Aubigné- ostel score to assess function. Survivorship calculation was performed using the method of Kaplan and Meier and any of the following factors as a definition of failure: radiographic evidence of worsening osteoarthritis (OA), or a Merle d'Aubigné-Postel score less than 15. Results. (1) The prevalence of a positive anterior impingement test decreased from 100% to 16% (p<0.001). The mean Merle d'Aubigné-Postel score improved from 13 (7 – 14) to 17 (14 – 18) at most recent followup (p<0.001). (2) Four hips (9%) showed progression of OA and three hips (7%) had a Merle d'Aubigné-Postel score of less than 15 at most recent followup. This resulted in a 93% survival rate at 10-year followup. (3) No hip developed avascular necrosis. Five hips (12%) had complications with reosteosynthesis due to screw breakage or nonunion. Another nine hips (21%) had subsequent surgeries including acetabular rim trimming / offset creation in 5 hips and screw removal in 4 hips. Conclusion. The modified Dunn procedure is a safe method to correct the morphology of the proximal femur in hips with SCFE. Ninety-free percent of the hips showed no progression of OA and a good clinical result at the 10-year followup. Twelve percent required revision surgery for complications all including screw breakage with nonunion of the greater trochanter

Introduction: It could be shown that an ample number of classical hip parameters for radiographic quantification of hip morphology on anteroposterior (AP) pelvic radiographs vary significantly with individual pelvic tilt and rotation. This could be proven not only for classical hip parameters (e.g. the lateral centre edge angle) but also for more recently described radiographic features such as acetabular retroversion. The resulting misdiagnosis and misinterpretation can potentially impair a correct therapy for the patient. We developed fast and easy-to-use computer software to perform three-dimensional (3D) analysis of the individual hip joint morphology using two-dimensional (2D) AP pelvic radiographs. Landmarks extracted from the radiograph were combined with a cone beam x-ray projection model and a strong lateral pelvic radiograph to reconstruct 3D hip joints. Twenty-five parameters including quantification of femoral head coverage can be calculated for a neutral orientation. The aim of the study was to evaluate the validity of this method for tilt and rotation correction of the acetabular rim and associated radiographic parameters. Methods: The validation comprised three steps:. External validation;. internal validation; and. intra-/interobserver analysis. A series of x-rays of 30 cadaver pelves mounted on a flexible holding device were available for step 1 and 2. External validation comprised the comparison of radiographical parameters of the cadaver hips when determined with our software in comparison with CT-based measurements or actual radiographs in a neutral pelvic orientation as gold standard. Internal validation evaluated the consistency of the parameters when each single pelvis was calculated back from different random orientations to the same neutral pelvic position. The intra-/interobserver analysis investigated the reliability and reproducibility of all parameters with the help of 100 randomized, blinded AP pelvic radiographs of a consecutive patient series. Results:. All but one parameter (acetabular index) showed a substantial to almost perfect correlation with the CT-measurements. Internal validity was substantial to almost perfect for all parameters. There was a substantial to almost perfect reliability and reproducibility of all parameters except the acetabular index. Conclusion: The software could be shown to be an accurate, reliable and reproducible method for correction of AP pelvic radiographs. This computer-assisted method allows standardized evaluation of all relevant radiographic parameters for detection of anatomic morphologic differences. It will be used to study the influence of pelvic malorientation on the radiographic appearance of each individual parameter. In addition, it allows evaluating the clinical significance of standardizing pelvic parameters

Aims

The effect of pelvic tilt (PT) and sagittal balance in hips with pincer-type femoroacetabular impingement (FAI) with acetabular retroversion (AR) is controversial. It is unclear if patients with AR have a rotational abnormality of the iliac wing. Therefore, we asked: are parameters for sagittal balance, and is rotation of the iliac wing, different in patients with AR compared to a control group?; and is there a correlation between iliac rotation and acetabular version?