Advertisement for orthosearch.org.uk
Results 1 - 8 of 8
Results per page:
Applied filters
Content I can access

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 105-B, Issue SUPP_3 | Pages 64 - 64
23 Feb 2023
Faruque R
Full Access

Tendon injuries after distal radius fractures Introduction: Tendon injuries after distal radius fractures are a well-documented complication that can occur in fractures managed both operatively and non-operatively. The extensor tendons, in particular the extensor pollicis longus (EPL) tendon, can be damaged and present late after initial management in a cast, or by long prominent screws that penetrate the dorsal cortex and cause attrition. Similarly, a prominent or distally placed volar plate can damage the flexor pollicis longus tendon (FPL). The aim of our study was to evaluate the incidence of tendon injuries associated with distal radius fractures. We conducted a single centre prospective observational study. Patients aged 18–99 who presented with a distal radius fracture between May 2018 to April 2020 were enrolled and followed-up for 24 months. Tendon injuries in the group were prospectively evaluated. Results: 199 patients with distal radius fractures were enrolled. 119 fractures (59.8%) had fixation and 80 (40.2%) were managed incast. In the non-operative group, 2 (2.5%) had EPL ruptures at approximately 4 weeks post injury. There were no extensor tendon ruptures in the operative group. In the operative group, there were 6 (5%) patients that required removal of metalware for FPL irritation. At the time of operation, there were no tendon ruptures noted. Within the operative group we evaluated plate prominence using a previously described classification (Soong et al.). 5 of the 6 patients (83%) with FPL irritation had Grade 3 prominence. The incidence of both flexor and extensor tendon injury in our cohort was 4%, extensor tendon rupture was 1% and flexor tendon rupture was avoided by early metalware removal. This study demonstrates tendon injuries are not uncommon after distal radius fractures, and close examination and follow-up are necessary to prevent eventual rupture. Plate prominence at the time of fixation should be minimised to reduce the risk of rupture


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXII | Pages 16 - 16
1 Jul 2012
Granville-Chapman J Hacker A Keightley A Sarkhel T Monk J Gupta R
Full Access

Extensor tendon ruptures have been reported in up to 8.8% of patients after volar plating and long screws have been implicated. The dihedral dorsal surface of the distal radius hinders accurate screw length determination using standard radiographic views (lateral; pronation and supination). A ‘dorsal tangential’ view has recently been described, but has not been validated. To validate this view, we mounted a plate-instrumented sawbone onto a jig. Radiographs at different angles were reviewed independently by 11 individuals. Skyline views clearly demonstrated all screw tips, whereas only 69% of screw tips were identifiable on standard views. With screws 2mm proud of the dorsal surface, skyline views detected 67% of long screws (sensitivity). The best of the standard views achieved only 11% sensitivity. At 4mm long, skyline sensitivity was 85%, compared with 25% for standard views. At 6mm long, 100% of long screws were detected on skylines, but only 50% of 8mm long screws were detected by standard views. Inter and intra-observer variability was 0.97 (p=0.005). For dorsal screw length determination of the distal radius, the skyline view is superior to standard views. It is simple to perform and its introduction should reduce the incidence of volar plate-related extensor tendon rupture


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXI | Pages 76 - 76
1 May 2012
S. M P. V
Full Access

Introduction. Getting the distal locking screw lengths right in volar locking plate fixation of distal radius is crucial. Long screws can lead to extensor tendon ruptures whereas short screws can lead to failure of fixation, especially if there is dorsal comminution of the fracture. The aim of our study was to determine the distal radius anatomy in relation to sagittal lengths and distance between dorsal bone edge and extensor tendons based on MRI scan. Method. One hundred consecutive MRI scans of wrist were reviewed by two of the authors on two occasions. All MRI scans were performed for different wrist pathologies except distal radius fractures or tumours. An axial image, two cuts proximal to the last visible articular surface, was selected. Sagittal length at 5 different widths, maximum volar width, radial overhang over distal radio-ulnar joint and the distance between dorsal bone edge and extensor tendons were measured. Results. A total of 120 MRI scans were included of which 74 were women and 46 were men. Mean volar width was 32mm and longest sagittal length was 22 mm (at Lister's tubercle). Length radial to Lister's tubercle was the shortest (17mm) and ulnar sides were 21mm and 29mm. Male measurements were mean 3mm longer than females. Mean radial overhang over DRUJ was 4mm. Distance from bone to tendons was within 2mm of dorsal radius edge. Conclusion. The study provides a reference guide to average screw lengths at different widths of distal radius in males and females. EPL tendon is closest to bone although all the extensor tendons are within 2mm of bone edge and carry a risk of injury from drill and screw placement. DRUJ is also at risk of injury if screws are placed within 4mm of ulnar edge of distal radius


Orthopaedic Proceedings
Vol. 88-B, Issue SUPP_II | Pages 212 - 212
1 May 2006
Ryu JJ Ishii TT Nagaoka MM
Full Access

The recent advance of drug therapy for RA tends to replace preventive surgery, for example synovectomy. A rupture of a dorsal extensor tendon of the hand is an absolute indication for surgery, however. Such tendon ruptures are usually treated by tendon reconstruction and synovectomy of wrist joint. At our department, reconstructive surgery was administered with synovectomy for extensor tendon ruptures of the hand in 97 hands for 86 patients until June 2005. Recently, however, we occasionally encounter ruptures of extensor tendons not associated with severe synovitis. To treat such tendon ruptures, we usually administer tendon transfers in combination with tenosynovectomy through a small skin incision. Because this surgical procedure has achieved excellent results, we report our experience. This study included 15 patients who received tenosynovectomy in combination with tendon transfers in 14 hands since February 2001. This surgical procedure is indicated for tendon ruptures associated with mild synovitis (swelling) without instability on the ulnar distal end. As a rule, a 2–3 cm transverse skin incision was made on the dorsum of the hand under maxillary nerve block. After exposure of the distal ruptured end of the tendon, tenosynovectomy was administered through the incision. Then, the distal end was transferred to the adjacent normal tendon and fixed to it with sutures. Postoperatively, the repair was immobilized with bandage. The patient was allowed actively to extend and bend the hand on the next day. As a rule, this operation is administered on an outpatient basis. The postoperative course was uneventful, without rupture of the repair. The preoperative ranges of motion of the MP and PIP joints were retained postoperatively without difficulty in ADL


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_III | Pages 340 - 340
1 Mar 2004
Rooney B Chan P Hems T
Full Access

Aims: The results of open reduction and internal þxation of 24 unstable dorsally displaced fractures of the distal radius are reported. Methods: The fractures occurred in 24 patients (mean age 39) and 17 of these fractures were AO Type C. All fractures were treated with open reduction and subperiosteal placement of dorsal 2.0mm or 2.7mm AO mini-fragment plates between 1st and 2nd dorsal compartments and below the 4th compartment. Additional volar plate þxation was required in 6 cases. Patients were examined and X-rays performed. Outcome was assessed using the Modiþed Mayo Wrist Score and Patient Evaluation Measure. Results: At þnal follow-up (mean 36 months), the mean range of movement of the wrist was: extension 78¡, ßexion 64¡, pronation 82¡ and supination 83¡. Grip strength averaged 84% of the unaffected side. Radiographic assessment showed a mean volar angle of 8¡, articular step in 5 cases and evidence of osteoarthritis in 10 wrists. The þnal outcome, using the Modiþed Mayo Wrist Score was excellent in 13 cases, good in 7, and fair in 4 cases. Complications were seen in 3 patients and metalwork has subsequently been removed in 7 patients for tendon irritation but there have been no cases of extensor tendon rupture. Conclusions: This initial experience has encouraged the use of open reduction and dorsal plating as the treatment of choice in young patients with unstable and/or intra-articular fractures of the distal radius. With time, range of movement and grip strength, continue to improve


Bone & Joint 360
Vol. 8, Issue 4 | Pages 25 - 29
1 Aug 2019


Bone & Joint 360
Vol. 7, Issue 2 | Pages 20 - 23
1 Apr 2018


Bone & Joint 360
Vol. 1, Issue 3 | Pages 16 - 19
1 Jun 2012

The June 2012 Wrist & Hand Roundup360 looks at; radial osteotomy and advanced Kienböck's disease; fixing the Bennett fracture; PEEK plates and four-corner arthrodesis,;carpal tunnel release and haemodialysis; degloved digits and the reverse radial forearm flap; occupational hand injuries; trapeziometacarpal osteoarthritis; fixing the fractured metacarpal neck and pyrocarbon implants for the destroyed PIPJ.