Post-meniscectomy syndrome is broadly characterised by intractable pain following the partial or total removal of a meniscus. There is a large treatment gap between the first knee pain after meniscectomy and the eligibility for a TKA. Hence, there is a strong unmet need for a solution that will relieve this post-meniscectomy pain. Goal of this first-in-man study was to evaluate the safety and performance of an anatomically shaped artificial medial meniscus prosthesis and the accompanying surgical technique. A first-in-man, prospective, multi-centre, single arm clinical investigation was intended to be performed on 18 post-medial meniscectomy syndrome patients with limited underlying cartilage damage (Kellgren Lawrence scale 0–3) in the medial compartment and having a normal lateral compartment. Eventually 5 patients received a polycarbonate urethane mediale meniscus prosthesis (Trammpolin® medial meniscus prosthesis; ATRO Medical B.V., the Netherlands) which was clicked onto two titanium screws fixated at the native horn attachments on the tibia. PROMs were collected at baseline and at 6 weeks, 3, 6, 12 and 24 months following the intervention including X-rays at 6, 12 and 24 Months. MRI scans were repeated after 12 and 24 months.Introduction
Methods
The COVID-19 pandemic has disrupted all segments of daily life, with the healthcare sector being at the forefront of this upheaval. Unprecedented efforts have been taken worldwide to curb this ongoing global catastrophe that has already resulted in many fatalities. One of the areas that has received little attention amid this turmoil is the disruption to trainee education, particularly in specialties that involve acquisition of procedural skills. Hand surgery in Singapore is a standalone combined programme that relies heavily on dedicated cross-hospital rotations, an extensive didactic curriculum and supervised hands-on training of increasing complexity. All aspects of this training programme have been affected because of the cancellation of elective surgical procedures, suspension of cross-hospital rotations, redeployment of residents, and an unsustainable duty roster. There is a real concern that trainees will not be able to meet their training requirements and suffer serious issues like burnout and depression. The long-term impact of suspending training indefinitely is a severe disruption of essential medical services. This article examines the impact of a global pandemic on trainee education in a demanding surgical speciality. We have outlined strategies to maintain trainee competencies based on the following considerations: 1) the safety and wellbeing of trainees is paramount; 2) resource utilization must be thoroughly rationalized; 3) technology and innovative learning methods must supplant traditional teaching methods; and 4) the changes implemented must be sustainable. We hope that these lessons will be valuable to other training programs struggling to deliver quality education to their trainees, even as we work together to battle this global catastrophe.
Femoral neck fractures are the second cause of hospitalization in elderly patients. Nowadays it is still not clear whether surgical treatment may provide better clinical outcome than conservative treatment in patients affected by mental disorders, such as senile dementia. The aim of this study was to retrospectively assess mortality and clinical and functional outcome after hemi arthroplasty operation following intracapsular neck fractures in patients with senile dementia. Between 2008 and 2014, 819 patients were treated at our Orthopaedic Institute for neck fracture of the femur (mean age: 83.8 years old). Eighty-four of these showed clear signs of cognitive impairment at time of admission in the Emergency Department. Mental state of patients was assessed in all cases, as routine, at the Emergency Room with the Short Portable Mental Status Questionnaire (Sh-MMT) and the Mini Mental State Examination (MMSE). Patients were divided in two groups depending whether they were surgically treated with hemiarthroplasty (Group B, 46 patients; 35 females, 11 males; mean age: 88.5 y.o.) or conservatively treated (Group C, 38 patients; 28 females, 10 males; mean age: 79.5 y.o.). These two groups were compared with a matched case-control group of patients surgically treated with no mental disorders (Group A, 40 patients; 34 females, 6 males; mean age: 81.5 y.o.) Incidence of mortality, systemic or local complications and functional clinical outcomes were evaluated with the ADL score and the Barthel index. Mortality rate was 35% (14 patients) for Group A, 50% (21 patients) for Group B and 95% (22 patients) for Group C. Paired t-test, with significance rate set at 0.05, showed significant higher mortality rate in Group A compared to both Group B ( Activity daily living scale and Barthel Index results showed higher results in Group B than Group C both in terms of recovery of walking ability and daily living (hairdressing, wearing clothes, eating).
Tibial slope was shown to majorly affect the outcomes of Total Knee Arthroplasty (TKA). More slope of the tibial component could help releasing a too tight flexion gap in cruciate-retaining (CR) TKA and is generally associated with a wider range of post-operative knee flexion. However, an excessive tibial slope could jeopardize the knee stability in flexion. The mechanism by which tibial slope affects the function of CR-TKA is not well understood. Moreover, it is not known whether the tibial bone resection should be performed by referencing the anterior cortex (AC) of the tibia or the center of the tibial plateau (CP) and whether the choice of either technique plays a role. The aim of this study was to investigate the effect of tibial slope on the position of tibiofemoral (TF) contact point, knee ligament forces, quadriceps muscle forces, and TF and patellofemoral (PF) joint contact forces during squat activity in CR-TKA. A previously validated musculoskeletal model of CR-TKA was used to simulate a squat activity performed by a 86-year-old male subject wearing an instrumented prosthesis [1,2]. Marker data over four consecutive repetitions of a squat motion were tracked using a motion optimization algorithm. Muscle and joint forces and moments were calculated from an inverse-dynamic analysis, coupled with Force-Dependent Kinematics (FDK) to solve knee kinematics, ligament and contact forces simultaneously. The tibial slope in the postoperative case was 0 degree and constituted the reference case for our simulations. In addition, eight additional cases were simulated with −3, +3, +6, +9 degrees of tibial slope, four of them simulating an AC referencing technique and four a CP technique.Introduction
Methods
Post-operative swelling and wound ooze following primary Total Knee Replacement (TKR) can lead to complications such as wound infection, and delays in achieving adequate range of motion. The aim of the study is to examine the effectiveness of using an additional layer of a self-adherent elastic wrap (CobanTM) in reducing post-operative swelling and wound ooze after Primary TKR. Seventeen pairs of patients who had had a primary TKR were studied in a prospective, age and gender-matched cohort study. Half of the patients had wool and crepe dressing (Group A) and the other half with an additional layer of CobanTM dressing (Group B), applied to the wound. Limb circumference was measured at three levels (below knee, knee and above knee) preoperatively and 3 consecutive days post-operatively. The area of wound ooze was measured using AutoCAD software. Group B showed a significant reduction difference in the mean of post-operative limb circumference at above knee level (3.2 vs 4.9 cm. Within the relative small size of this study, there appeared a significant reduction in post-operative limb swelling and wound ooze when using CobanTM in TKR. It is promising preliminary results, however the study groups must be extended.
KAR™ prosthesis was introduced following the success of Corail® femoral stem to tackle difficult revision cases (Paprosky type1, 2a, 2b and 3a). The ARTO group reported a success rate of 94% at 17 years follow-up. Only two independent studies reported similar success rate to date. To analyse the short-term performance of the KAR™ prosthesis used in our unit.Background
Purpose
Special high-flexion prosthetic designs show a small increase in postoperative flexion compared to standard designs and some papers show increased anterior knee pain with these prosthesis. However, no randomised controlled trails have been published which investigate difference in postoperative complaints of anterior knee pain. To assess difference in passive and active postoperative flexion and anterior knee pain we performed a randomized clinical trial including the two extremes of knee arthroplasty designs, being a high flex posterior stabilized rotating platform prosthesis versus a traditional cruciate retaining fixed bearing prosthesis. We hypothesised that the HF-PS design would allow more flexion, due to increased femoral rollback with less anterior knee pain than the CR design. We specifically assessed the following hypotheses: Patients have increased flexion after HF-PS TKA compared to CR TKA, both passive and active. Patients show an increased femoral rollback in the HF-PS TKA as compared to the CR TKA. Patients receiving a HF-PS TKA design report reduced anterior knee pain relative to those receiving the CR TKA. In total 47 patients were randomly allocated to a standard cruciate retaining fixed bearing design (CR) in 23 patients and to a high-flexion posterior stabilized mobile bearing design (HF-PS) in 24 patients. Preoperative and one year postoperative we investigated active and passive maximal flexion. Furthermore, we used the VAS pain score at rest and during exercise and the Feller score to investigate anterior knee pain. A lateral roentgen photograph was used to measure femoral rollback during maximal flexion.Introduction
Methods
Limb length discrepancy after total hip replacement is one of the possible complications of suboptimal positioning of the implant and cause of patients dissatisfaction. Computer assisted navigation become affirmed in last years for total hip replacement surgery and it is also used for the evaluation of the intra-operative limb length discrepancy. The purpose of this study is to verify the reliability of a navigation system with a dedicated software in intraoperative evaluation of limb lengthening and offset as compared with manual technique. Forty patients who underwent a Total Hip Arthroplasty in our institution were entrolled in this study. Twenty patients were evaluated with pre operative manual planning (group A) and treated with hand positioning of femoral stem. Twenty Patient were evaluated with preoperative manual planning and treated with Computer assisted navigation of Stem (group B). Mean operating time and blood loss were analyzed. Radiological and clinical follow up was made at 1, 3, 6 and 12 months postoperative to assess any mismatch of implant, complications and clinical results that was measured with Harris Hip Score.Background
Methods
A few follow-up studies of high flexion total knee arthoplasties report disturbingly high incidences of femoral loosening. Finite element analysis showed a high risk for early loosening at the cement-implant interface at the anterior flange. However, femoral implant fixation is depending on two interfaces: cement-implant interface and the cement-bone interface. Due to the geometry of the distal femur, a part of the cement-bone interface consists of cement-cortical bone interface. The strength of the cement-bone interface is lower than the strength of the cement-implant interface. The research questions addressed in this study were: 1) which interface is more prone to loosening and 2) what is the effect of different surgical preparation techniques on the risk for early loosening. To achieve data for the cement-(cortical)bone interface strength and the effects of different preparation techniques on interfacial strength, human cadaver interface stress tests were performed for different preparation techniques of the bony surface and the results were implemented in a finite element (FE) model as described before. The FE model consisted of a proximal tibia and fibula, TKA components, a quadriceps and patella tendon and a non-resurfaced patella. For use in this study, the distal femur was integrated in the FE model including cohesive interface elements and a 1 mm bone cement layer. In the model, the cement-bone interface was divided into two areas, representing cortical and cancellous bone. The posterior-stabilised PFC Sigma RP-F (DePuy, J&J, USA) was incorporated in the FE knee model following the surgical procedure provided by the manufacturer. A full weight-bearing squatting cycle was simulated (ROM = 50°-155°). The interface failure index was calculated.Introduction
Materials & methods
In the present study we describe the clinical results of the Scientific Hip Prosthesis® (SHP). With the goal of smoothening cement-bone interface stress peaks, the SHP was developed using shape optimization algorithms together with finite element modelling techniques. The resulting shape and cement stresses are seen in Figure 1. The introduction of the SHP prosthesis was performed in a stepwise fashion including a RSA study performed by Nivbrant et al1. RSA studies for prosthetic types that are in long-term use are of great value in predicting the survivorship related to the migration rate and pattern for that specific type of prosthesis. If a stem in a patient shows a much higher migration rate than the typical one, the stem may be identified as at high-risk for early loosening. The study of Nivbrant et al1 revealed unexpectedly high migration values and it was stated that the SHP stem was not the preferred stem to use despite the good Harris Hip Score and Pain score at two years follow-up. In the present study the clinical results of a single surgeon study consisting of 171 hips with a follow-up of 5–12 years were evaluated. The mean follow-up was 8.2 years (5.0–12.0). The survival rate was 98.8% at ten years follow-up for aseptic loosening of the stem. The mean Harris Hip Score at 10 year follow-up was 89.2 ± 7.5. This study therefore indicates that a new prosthetic design may function clinically rather well, despite the relatively high migration rates which have been reported. In case of a RSA study with a new prosthesis it may not be so evident what the expected “typical” migration rate or pattern is. So in order to predict early loosening the typical migration rate has to be known. Perhaps typical migration rates can be established using standardized cadaver migration experiments or computer simulation models techniques. Since these standardized tools are currently not available, the prediction of clinical survival of new prosthetic components remains a challenging task and the interpretation of migration rates with new designs should be considered with much caution.
