Advertisement for orthosearch.org.uk
Results 1 - 5 of 5
Results per page:
Applied filters
Content I can access

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 102-B, Issue SUPP_7 | Pages 45 - 45
1 Jul 2020
Mahmood F Burt J Bailey O Clarke J Baines J
Full Access

In the vast majority of patients, the anatomical and mechanical axes of the tibia in the coronal plane are widely accepted to be equivalent. This philosophy guides the design and placement of orthopaedic implants within the tibia and in both the knee and ankle joints. However, the presence of coronal tibial bowing may result in a difference between these two axes and hence cause suboptimal placement of implanted prostheses. Although the prevalence of tibial bowing in adults has been reported in Asian populations, to date no exploration of this phenomenon in a Western population has been conducted. The aim of this study was to quantify the prevalence of coronal tibial bowing in a Western population.

This was an observational retrospective cohort study using anteroposterior long leg radiographs collected prior to total knee arthroplasty in our high volume arthroplasty unit. Radiographs were reviewed using a Picture Archiving and Communication System. Using a technique previously described in the literature for assessment of tibial bowing, two lines were drawn, each one third of the length of the tibia. The first line was drawn between the tibial spines and the centre of the proximal third of the tibial medullary canal. The second was drawn from the midpoint of the talar dome to the centre of the distal third of the tibial medullary canal. The angle subtended by these two lines was used to determine the presence of bowing. Bowing was deemed significant if more than two degrees. The position of the apex of the bow determined whether it was medial or lateral. Measurements were conducted by a single observer and 10% of measurements were repeated by the same observer and also by two separate observers to allow calculation of intraclass correlation coefficients (ICCs).

A total of 975 radiographs consecutively performed in the calendar years 2015–16 were reviewed, 485 of the left leg and 490 of the right. In total 399 (40.9%) tibiae were deemed to have bowing more than two degrees. 232 (23.8%) tibiae were bowed medially and 167 (17.1%) were bowed laterally. The mean bowing angle was 3.51° (s.d. 1.24°) medially and 3.52° (s.d. 1.33°) laterally. Twenty-three patients in each group (9.9% medial/13.7% lateral) were bowed more than five degrees. The distribution of bowing angles followed a normal distribution, with the maximal angle observed 10.45° medially and 9.74° laterally. An intraobserver ICC of 0.97 and a mean interobserver ICC of 0.77 were calculated, indicating excellent reliability.

This is the first study reporting the prevalence of tibial bowing in a Western population. In a significant proportion of our sample, there was divergence between the anatomical and mechanical axes of the tibia. This finding has implications for both the design and implantation of orthopaedic prostheses, particularly in total knee arthroplasty. Further research is necessary to investigate whether prosthetic implantation based on the mechanical axis in bowed tibias results in suboptimal implant placement and adverse clinical outcomes.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_12 | Pages 34 - 34
1 Nov 2015
Welsh F Helmy N De Gast A Beck M French G Baines J
Full Access

Introduction

Obesity is known to influence surgical risk in total hip replacement (THR), with increased Body Mass Index (BMI) leading to elevated risk of complications and poorer outcome scores. Using a multinational trial data of a single implant, we assess the impact of BMI and regional variations on Harris Hip scores (HHS).

Method

We assessed BMI in 11 regional centres and associations with HHS at one year. Data were collected from 744 patients prospectively from 11 centres in the UK, Germany, Switzerland, Austria, New Zealand and Netherlands as part of a multicentre outcome trial. All Arthroplasties used RM Pressfit vitamys components (Mathys, Switzerland). Demographic, operative data and HHS were analysed with General Linear Model Anova, Minitab 16 (Minitab Inc, Pennsylvania).


Orthopaedic Proceedings
Vol. 93-B, Issue SUPP_III | Pages 391 - 391
1 Jul 2011
Deep K Picard F Baines J Deakin A Kinninmonth A Sarungi M
Full Access

Arthritic knees, for the purpose of surgical correction during arthroplasty, are generally thought to be either varus knees or valgus knees and soft tissue releases are done in accordance with the same concept. This view is dependent on the clinical deformity in extended knee and the plain AP radiograph of the extended knee. This concept is now challenged by the observations from our study of the arthritic knee kinematics using computer aided navigation when performing total knee replacement arthroplasty. We performed 283 total knee replacements with computer aided navigation. Imageless navigation was used with Stryker and Orthopilot systems. Bone trackers were fixed to the bones and through real time infrared communication the data was collected. The knee kinematics were recorded before and at the end of surgery. This included measurement of biomechanical axis with the knee extended and then gradually flexed. The effect of flexion on the coronal alignment was recorded real time on the computer. The results were then analysed and compared with plain radiographic deformity on long leg films.

Majority of the knees did not behave in a true varus or valgus fashion. We classified the deformity into different groups depending on the behavior of the knee in coronal plane as it moves from extension to flexion. 2 degree was taken as minimum deviation to signify change, as the knee bends from full extension to flexion. The classification system is as follows

Neutral

Deformity - Varus/Valgus to start with in extension

Gp1

Deformity remains the same as the knee flexes

Increasing deformity as the knee flexes

Gp2

Decreasing deformity but does not reach neutral in flexion

Decreasing deformity reaches neutral in flexion

Gp3

Decreasing deformity and crosses to opposite (Varus to valgus or valgus to varus) deformity in flexion

Gp4

Deformity first increases and then decreases but does not reach neutral

Deformity first increases and then decreases to neutral

Deformity first increases and then decreases to cross over to opposite deformity in flexion

Traditional releases of medial or lateral structures without realising the true picture of what happens when the knee is flexed, may not be correct. From our study it is clear that not all arthritic varus or valgus knees behave in the same way. Some of the releases we perform conventionally may not be required or need to be modified depending on the knee kinematics.


Orthopaedic Proceedings
Vol. 91-B, Issue SUPP_III | Pages 396 - 396
1 Sep 2009
Baines J Deakin A Picard F
Full Access

Computer assisted total knee arthroplasty (TKA) is still a relatively novel technique. Surgeons wishing to adopt any new practice undergo a learning curve. The learning curve experienced with navigated TKA, its duration and cost in terms of complications, has not been well defined in the literature. Therefore we set out to analyse the learning curve of a newly appointed consultant with no previous experience of navigated TKA by using a surgeon who has completed over 1000 TKAs in over 10 years of experience with this technique as a baseline.

The study used the inexperienced surgeon’s first ever fifty navigated TKAs and the experienced surgeon’s most recent fifty TKAs over the same period in the same theatre using the same CT free navigation system (Orthopilot®) and prosthesis. Operative time, bone cuts and limb alignment before and after prosthesis implantation were recorded, along with the navigation specific difficulties and complications encountered by the inexperienced surgeon.

There was no statistical difference in the accuracy of postoperative limb alignment in either the coronal (p = 0.33) or sagital (p = 0.35) planes between the novice and experienced surgeon. There was also no difference in the executed bone cut angles (tibial p = 0.79, femoral p = 0.92). The operating time showed a difference between the two surgeons with the novice having a median of 80 mins (inter-quartile range of 20 mins) and the experienced surgeon had a median of 70 mins (inter-quartile range of 20 mins), p = 0.001. However there was a statistically significant reduction in operating time between the inexperienced surgeon’s first twenty and last twenty TKAs (p = 0.001). Comparison of the last 20 TKAs for each surgeon showed no difference in the operative time (medians of 70 mins and 75 mins respectively, p = 0.945). The navigation specific difficulties and complications recorded for the novice navigator were all related to the trackers: one loosening, one tibial tracker placed too proximally, one superficial infection in a tibial tracker wound and one incompletely engaged pin-tracker coupling which brought about the only conversion to manual TKA in this series.

We conclude that in terms of execution and outcome, a beginner using computer assisted TKA can match the results of an experienced navigator from the outset. The only parameter assessed that underwent a clear learning curve was the operative time, which took approximately 20 procedures to approach the same as the experienced surgeon.


Orthopaedic Proceedings
Vol. 91-B, Issue SUPP_III | Pages 398 - 398
1 Sep 2009
Basanagoudar P Deakin A Vijayan A Baines J Gregori A Picard F
Full Access

Computer assisted total knee arthroplasty (TKA) enables the measurement of the dynamics of the knee both before and after the implant of the prosthesis. Much time has been spent looking at the outcomes of navigated TKA however less time has been invested on understanding how the data collected pre-operatively can inform the surgeon and help the surgical decision making process. The aim of this work was to use navigation as a tool to quantify and classify preoperatively valgus knees.

Between August 2006 and September 2007 a group of 51 patients who demonstrated intra-operative initial neutral or valgus aligned knees underwent navigated TKA using the Columbus knee prosthesis and the Orthopilot® navigation system (BBraun, Tuttlingen, Germany). Demographic data were recorded, along with the preoperative radiograph appearance and clinical assessment of alignment. During the surgery the approach used and the knee mechanical femorotibial (MFT) angle though the range of flexion were recorded. The knees were then categorised as either “True” valgus or “False” valgus based on whether the MFT angle at 30°, 60° and 90° flexion was still valgus (True) or had gone into varus (False).

Five patients were excluded from the study group as they had incomplete data in knee flexion. Of the remaining 46 patients, 28 were True valgus and 18 were False valgus. For the two groups demographic data were compared. Male to female ratio was 9:19 for the True valgus and 4:14 for the False valgus. The mean age of the True group was 70 years (range 52–85 years) and the False was 69 years (range 53–84 years). For BMI the True group had mean of 31 (range 20–40) and False of 33 (range 26–42). Twenty-five of the 28 True valgus knees showed preoperative evidence of clinical genu valgum deformity and radiologic evidence of predominantly lateral compartment osteoarthritis. Five patients had ipsilateral hip replacements in the past and five had rheumatoid arthritis. Seventeen were operated by lateral parapatellar approach. Eighteen required ilio-tibial band release with additional lateral collateral ligament release in five knees. Six true valgus knees did not require any soft tissue release. Five patients required lateral retinacular release to achieve thumb free patellar tracking. The median operating time for the True valgus group was 80 mins. Ten of the 18 false valgus knees showed evidence of clinical varus deformity and radiological evidence of predominantly medial compartment osteoarthritis. Only one patient had an ipsilateral hip replacement in the past and one had rheumatoid arthritis. All 18 knees underwent TKA by medial parapatellar approach, requiring no additional soft tissue release in 17 knees and a moderate release in one knee. The median operating time for the False valgus group was 60 mins.

True valgus knees had more significant deformities clinically and radiologically, longer surgical time and more incidence of soft tissue release when compared to the False valgus knees. False valgus knees behaved like varus knees clinically, radiologically and intra-operatively and should therefore be treated as such when making surgical choices.