Advertisement for orthosearch.org.uk
Results 1 - 14 of 14
Results per page:
Orthopaedic Proceedings
Vol. 99-B, Issue SUPP_3 | Pages 20 - 20
1 Feb 2017
Athwal K El Daou H Lord B Davies A Manning W Rodriguez-Y-Baena F Deehan D Amis A
Full Access

Introduction

There is little information available to surgeons regarding how the lateral soft-tissue structures prevent instability in knees implanted with total knee arthroplasty (TKA). The aim of this study was to quantify the lateral soft-tissue contributions to stability following cruciate retaining (CR) TKA.

Methods

Nine cadaveric knees with CR TKA implants (PFC Sigma; DePuy Synthes Joint Reconstruction) were tested in a robotic system (Fig. 1) at full extension, 30°, 60°, and 90° flexion angles. ±90 N anterior-posterior force, ±8 Nm varus-valgus and ±5 Nm internal-external torque were applied at each flexion angle. The anterolateral structures (ALS, including the iliotibial band, anterolateral ligament and anterolateral capsule), the lateral collateral ligament (LCL), the popliteus tendon complex (Pop T) and the posterior cruciate ligament (PCL) were then sequentially transected. After each transection the kinematics obtained from the original loads were replayed, and the decrease in force / moment equated to the relative contributions of each soft-tissue to stabilising the applied loads.


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_7 | Pages 115 - 115
1 May 2016
Dold P Pandorf T Flohr M Preuss R Bone M Holland J Deehan D
Full Access

INTRODUCTION

Deformation of modular acetabular press-fit shells is of much interest for surgeons and manufacturers. Initial fixation is achieved through press-fit between shell and acetabulum with the shell mechanically deforming upon insertion. Shell deformation may disrupt the assembly process of modular systems and may adversely affect integrity and durability of the components and tribology of the bearing. The aim of the study was to show shell deformation as a function of bone and shell stiffness.

METHODS

The stiffness of the generic shells was determined using a uniaxial/ two point loading frame by applying different loads, and the change in dimension was measured by a coordinate measurement machine (CMM). Cadaver lab deformation measurements were done before and after insertion for 32 shells with 2 wall thicknesses and 11 shell sizes using the ATOS Triple Scan III (ATOS) optical system previously validated as a suitable measurement system to perform those measurements. Multiple deformation measurements per cadaver were performed by using both hip sides and stepwise increasing the reamed acetabulum by at least 1 mm, depending on sufficient residual bone stock. The under-reaming was varied between 0mm and 1mm, respectively. From the deformations, the resulting forces on the shells and bone stiffness were calculated assuming force equilibrium as well as linear-elastic material behaviour in each point at the rim of the shell.


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_1 | Pages 114 - 114
1 Jan 2016
Dold P Bone M Flohr M Preuss R Joyce TJ Deehan D Holland J
Full Access

INTRODUCTION

Deformation of modular acetabular press-fit shells is a topic of much interest for surgeons and manufacturer. Such modular components utilise a titanium shell with a liner manufactured from metal, polyethylene or ceramic. Initial fixation is achieved through a press-fit between shell and acetabulum with the shell mechanically deforming upon insertion. Shell deformation may disrupt the assembly process of inserting the bearing liner into the acetabular shell for modular systems. This may adversely affect the integrity and durability of the components and the tribology of the bearing.

OBJECTIVE

Most clinically relevant data to quantify and understand such shell deformation can be achieved by cadaver measurements. ATOS Triple Scan III was identified as a measurement system with the potential to perform those measurements. The study aim was to validate an ATOS Triple Scan III optical measurement system against a co-ordinate measuring machine (CMM) using in-vitro testing and to check capability/ repeatability under cadaver lab conditions.


Orthopaedic Proceedings
Vol. 96-B, Issue SUPP_16 | Pages 27 - 27
1 Oct 2014
Hunt N Ghosh K Blain A Athwal K Rushton S Longstaff L Amis A Deehan D
Full Access

Instability is reported to account for around 20% of early TKR revisions. The concept of restoring the “Envelope of Laxity” (EoL) mandates a balanced knee through a continuous arc of functional movement. We therefore hypothesised that a single radius (SR) design should confer this stability since it has been proposed that the SR promotes normal medial collateral ligament (MCL) function with isometric stability throughout the full arc of motion.

Our aim was to characterise the EoL and stability offered by a SR cruciate retaining (CR)-TKR, which maintains a SR from 10–110° flexion. This was compared with that of the native knee throughout the arc of flexion in terms of anterior, varus/valgus and internal/ external laxity to assess whether a SR CR-TKR design can mimic normal knee joint kinematics and stability.

Eight fresh frozen cadaveric lower limbs were physiologically loaded on a custom jig. The operating surgeon performed anterior drawer, varus/ valgus and internal/external rotation tests to determine ‘maximum’ displacements in 1) native knee and 2) single radius CR-TKR (Stryker Triathlon) at 0°, 30°, 60°, 90° and 110° flexion. Displacements were recorded using computer navigation. Significance was determined by linear modelling (p≤0.05).

The key finding of this work was that the EoL offered by the SR CR-TKR was largely equivalent to that of the native knee from 0–110°. The EoL increased significantly with flexion angle for both native and replaced knees. Overall, after TKR anterior laxity was comparable with the native knee, whilst total varus-valgus and internal-external rotational laxities reduced by only 1°. However, separated varus and valgus laxities at 110° significantly increased after TKR as did anterior laxity at 30° flexion.

In conclusion, the overall EoL offered by the SR CR-TKR is comparable to that of the native knee. In the absence of soft tissue deficiency, the implant appears to offer reliable and reproducible stability throughout the functional range of movement, with exception of anterior laxity at 30° and varus and valgus laxity when the knee approaches high flexion. These shortcomings should offer scope for future work.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_1 | Pages 135 - 135
1 Jan 2013
Jameson S Kyle J Baker P Mason J Deehan D McMurtry I Reed M
Full Access

Introduction

National Institute for Health and Clinical Excellence (NICE) guidelines recommend the use of total hip replacement (THR) for displaced intracapsular fractured neck of femur (NOF) in cognitively intact patients who were independently mobile prior to the injury. The National Joint Registry for England and Wales (NJR) has collected data on THRs performed since 2003. This retrospective cohort study explores risk factors independently associated with implant failure and perioperative mortality.

Methods

NJR data recording a THR performed for acute fractured NOF between 2003 and 2010 were analysed. Cox proportional hazards models were used to analyse the extent to which risk of implant revision was related to specific covariates. Multivariable logistic regression was used to analyse factors affecting 90-day perioperative mortality. Significance was taken as p< 0.01.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_1 | Pages 76 - 76
1 Jan 2013
Baker P Jameson S Deehan D Gregg P Porter M Tucker K
Full Access

Background

Current analysis of unicondylar knee replacements (UKR) by national registries is based on the pooled results of medial and lateral implants. Using data from the National Joint Registry for England and Wales (NJR) we aimed to determine the proportion of lateral UKR implanted, their survival and reason for failure in comparison to medial UKR.

Methods

By combining information on the side of operation with component details held on the NJR we were able to determine implant laterality (medial vs. lateral) for 32,847 of the 35,624 (92%) UKR registered before December 2010. Kaplan Meier plots, Life tables and Cox' proportion hazards were used to compare the risk of failure for lateral and medial UKRs after adjustment for patient and implant covariates.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_1 | Pages 197 - 197
1 Jan 2013
Baker P Critchley R Jameson S Hodgson S Reed M Gregg P Deehan D
Full Access

Background

Both surgeon and hospital volume influence patient outcomes following revision knee arthroplasty.

Purpose

To audit all centres performing revision knee procedures in England and Wales over a 2-year period. All centres were audited against two pre-defined standards linked to hospital volume

Operative volume should be greater than 10 revisions per year;

More than 2.5 revisions should be performed for every 100 primary arthroplasties implanted.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_1 | Pages 27 - 27
1 Jan 2013
Jameson S Baker P Mason J Deehan D Gregg P Porter M Reed M
Full Access

Introduction

Following in-depth analysis of the market leading brand combinations in which we identified implant influences on risk of revision, we compared revision in patients implanted with different categories of hip replacement in order to find implant with the lowest revision risk, once known flawed options were removed.

Methods

All patients with osteoarthritis who underwent a hip replacement (2003–2010) using an Exeter-Contemporary (cemented), Corail-Pinnacle (cementless), Exeter-Trident (Hybrid) or a Birmingham Hip resurfacing (BHR) were initially included within the analysis. Operations involving factors that were significant predictors of revision were excluded. Cox proportional hazard models were then used to assess the relative risk of revision for a category of implant (compared with cemented), after adjustment for patient covariates.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_1 | Pages 131 - 131
1 Jan 2013
Khan S Rushton S Courtney M Gray A Deehan D
Full Access

Introduction

Renal homeostasis has been shown to influence mortality after hip fractures; this is true for patients with both chronic kidney disease, and those who develop acute renal dysfunction after surgery. We have examined the influence of impaired renal function upon mortality and length of stay. We investigated this relationship through accurate mathematical modelling of available biochemistry data on a cohort of hip fracture patients.

Methods

Complete data were available for 566 patients treated over a 27-month period. All patients had urea and creatinine checked on admission, and at 24–48 hours after surgery. Post-operative analgesia, fluid therapy, transfusion protocols and orthogeriatric reviews were standardised. Generalised Linear Models and correlation matrices were used. Cox-proportional hazards analyses investigated the association between serum concentrations of urea and creatinine on admission and length of stay and mortality after surgery.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_1 | Pages 38 - 38
1 Jan 2013
Baker P Rushton S Jameson S Reed M Gregg P Deehan D
Full Access

Purpose

To determine how patient characteristics; health status and pre-operative knee function effect patient reported satisfaction and operative success following total knee replacement (TKR). We hypothesised that a number of patient factors would influence the reported levels of symptomatic improvement (success) and satisfaction and that these two outcomes would represent different aspects of the patient's perception of outcome.

Design

Retrospective cohort analysis of patient reported outcome measures (PROMs) and National Joint Registry (NJR) data. Complete patient data was available for 9,874 TKRs performed for osteoarthritis between 1/8/08 and 31/12/10. The relationship of the background factors to patient perceived satisfaction and success was investigated using ordinal logistic regression and structural equation modelling (SEM).


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_1 | Pages 39 - 39
1 Jan 2013
Jameson S Baker P Charman S Deehan D Reed M Gregg P van der Meulen J
Full Access

Background

The most appropriate form of chemical thromboprophylaxis following knee replacement is a contentious issue. Most national guidelines recommend the use of low molecular weight Heparin (LMWH) whilst opposing the use of aspirin. We compared thromboembolic events, major haemorrhage and death after knee replacement in patients receiving either aspirin or LMWH.

Methods

Data from the National Joint Registry for England and Wales was linked to an administrative database of hospital admissions in the English National Health Service. A total of 156 798 patients undergoing knee replacement between April 2003 and September 2008 were included and followed up for 90 days. Multivariable risk modelling was used to estimate odds ratios adjusted for baseline risk factors (AOR). An AOR < 1 indicates that risk rates are lower with LMWH than with aspirin.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXXIX | Pages 83 - 83
1 Sep 2012
Malviya A Brewster N Weir D Holland J Deehan D
Full Access

Purpose

Although classic teaching holds that the least amount of constraint should be implanted, there is very little in the literature to substantiate this. This study attempts to quantify the influence of constraint and various indications upon functional outcome following aseptic first time revision knee arthroplasty. The null hypothesis was that the level of constraint and indication for surgery would not influence the functional outcome following revision knee replacement.

Methods

A single centre prospective study was performed to examine the outcome for 175 consecutive total revision knee replacements performed between 2003 and 2008 with a minimum follow-up of two years. Patient reported outcome data was used to determine the influence of final level of component constraint and its relationship with primary indication for surgery.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_IV | Pages 123 - 123
1 Mar 2012
Reay E Wu J Sarah G Deehan D Holland J
Full Access

During a retrospective case note analysis, a significant difference was found in prosthesis survival, between two cohorts of patients who underwent different total knee replacements. The first cohort included 70 patients who underwent Kinemax Plus total knee replacement, the second cohort included 58 patients who underwent PFC Total Knee replacement. All patients were under the care of one Consultant Orthopaedic Surgeon. Interestingly, the Kinemax Plus cohort was found to have a higher rate of revision compared to the PFC cohort. A detailed comparison was carried out between the two groups to identify any obvious cause for the disparity.

The two cohorts were found to be well matched with respect to age, sex, ASA grade, underlying pathology and operative technique. Median follow up being 6 years and 5 years for the Kinemax Plus and PFC groups respectively.

There were 11 failed prostheses in the Kinemax Plus cohort, 7 undergoing revision with the remaining 4 patients offered revision but unwilling to have surgery. Wear of the polyethylene tibial insert was the most obvious finding at revision, present in six of the seven revisions. 97% of the Kinemax Plus Prostheses were intact at 5 years but by 8 years only 87% were intact. There were no revisions performed in the PFC cohort.

Post-operative x-ray analysis was undertaken to rule out prosthesis malalignment as a cause for the increased failure rate. The coronal alignment of the prostheses (CAK) was calculated and all post operative x-rays were within the normal limits of 4-10 degrees.

Analysis of the explanted Kinemax Plus polyethylene liners was undertaken. In six cases, the polyethylene bearing surfaces displayed severe surface and subsurface delamination. This suggests massive fatigue and fatigue wear. Only one implant showed localised delamination.

These findings suggest the hypothesis of weak polyethylene particle interface strength.


The posterior drawer is a commonly used test to diagnose an isolated PCL injury and combined PCL and PLC injury. Our aim was to analyse the effect of tibial internal and external rotation during the posterior drawer in isolated PCL and combined PCL and PLC deficient cadaver knee.

Ten fresh frozen and overnight-thawed cadaver knees with an average age of 76 years and without any signs of previous knee injury were used. A custom made wooden rig with electromagnetic tracking system was used to measure the knee kinematics. Each knee was tested with posterior and anterior drawer forces of 80N and posterior drawer with simultaneous external or internal rotational torque of 5Nm. Each knee was tested in intact condition, after PCL resection and after PLC (lateral collateral ligament and popliteus tendon) resection. Intact condition of each knees served as its own control. One-tailed paired student's t test with Bonferroni correction was used.

The posterior tibial displacement in a PCL deficient knee when a simultaneous external rotation torque was applied during posterior drawer at 90° flexion was not significantly different from the posterior tibial displacement with 80N posterior drawer in intact knee (p=0.22). In a PCL deficient knee posterior tibial displacement with simultaneous internal rotation torque and posterior drawer at 90° flexion was not significantly different from tibial displacement with isolated posterior drawer. In PCL and PLC deficient knee at extension with simultaneous internal rotational torque and posterior drawer force the posterior tibial displacement was not significantly different from an isolated PCL deficient condition (p=0.54).

We conclude that posterior drawer in an isolated PCL deficient knee could result in negative test if tibia is held in external rotation. During a recurvatum test for PCL and PLC deficient knee, tibial internal rotation in extension results in reduced posterior laxity.