Advertisement for orthosearch.org.uk
Results 1 - 4 of 4
Results per page:
Applied filters
Content I can access

Include Proceedings
Dates
Year From

Year To
Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_9 | Pages 77 - 77
1 May 2016
Nakata K Kitada M Tamura S Owaki H Fuji T
Full Access

Introduction

Short stems have been developed for some years for preservation of femoral bone stock and achieve physiological proximal loading. Shortening stem length is a merit for bone stock preservation. However, it might lead to reduction of primary stability. We investigated relationship between stem length and primary stability by patient specific finite element analysis (FEA).

Materials and Methods

Thirty-one hips in 31 patients were performed total hip arthroplasty with standard length tapered wedge-shaped (TW) cementless stem (CTi-II: Corin, Cirencester, UK). There were 6 males and 25 females. The average age at operation was 69 years old. The average body mass index was 23.9 kg/m2. Primary diagnoses were secondary osteoarthritis due to developmental dysplasia of the hip in 29 hips. Femoral canal shapes were normal in 21, stovepipe in 6 and champagne-flute in 4 hips. Bone qualities were type A in 6, B in 19 and C in 6 hips.

The patients underwent computed tomography (CT) preoperatively and postoperatively. We constructed preoperative three dimensional (3D) femur surface models from preoperative CT data with individual bone mineral density (BMD) mapping. The postoperative 3D femur and rough stem surface models were obtained from postoperative CT data. The coordinates of the postoperative femur were transformed to fit the preoperative femur model. A precise stem model constructed using computer-assisted design data was matched to the transformed rough stem model using the iterative closest point algorithm. We obtained a patient-specific model with the proximal bone geometry, allocation of BMD and stem alignment. We estimated the average of axial and rotational micromotion (MM) at stem-bone interface and the ratio of area (MM � 40 micrometers) on the porous surface in order to analyze primary stability of TW stem with several lengths (standard (100 %), 75 %, 50 %, 40 % and 30 % length).


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 448 - 448
1 Dec 2013
Nakata K Kitada M Akiyama K Owaki H Fuji T
Full Access

[Introduction]

Short tapered wedge-shaped cementless (TW) stems have been widely used for several years. The concept of fixation of TW stem is wedge-fit fixation in the proximal metaphysis. Developmental dysplasia of the hip (DDH) has anatomical abnormality, such as excessive femoral anteversion, short femoral neck length, narrow femoral cavity, or proximal-distal mismatching of the femoral canal. Therefore, Mismatching between stem and bone might be occurred in DDH. We evaluated intramedullary matching of short TW stem for DDH by three dimensional (3D) digital template in order to clarify whether mismatching between stem and bone is seen in DDH implanted short TW stem.

[Materials and Methods]

One hundred hips (92 patients) with DDH were performed preoperative simulation for total hip arthroplasty by 3D digital template system (ZedHip: Lexi, Tokyo, Japan). The average age was 63.5 years old. There were 12 males and 80 females. The average bone mass index was 21.5 kg/m2. Femoral canal shape was normal in 71, champagne-flute in 16 and stovepipe in 13 hips. Bone quality was classified into type A in 23, type B in 74 and type C in 3 hips. Preoperative computed tomography data were used for 3D digital template and reconstructed to 3D femoral model. Short TW stem (Taperloc Complete Microplasty: Biomet, Warsaw, IN) model constructed from computer-assisted design was matched to the reconstructed femoral model. Short TW stem model was in principle implanted according to the femoral neck anteversion with neutral alignment (varus and valgus < 2 degrees, flexion and extension < 2 degrees) at the coronal and sagittal plane of the femur. Stem size was determined in order to obtain the largest intramedullary matching at the coronal plane. Area of stem fitting with the cortical bone was investigated at 10 mm intervals above and below of mid minor trochanter. Intramedullary matching pattern was classified into proximal mediolateral metaphyseal fit, proximal flare fit and diaphyseal fit at multiple reconstructed planes of the 3D femoral model according to stem fitting area.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 453 - 453
1 Dec 2013
Nishikawa M Owaki H Fuji T
Full Access

[Objective]

The objectives of this study are to measure the morphometric parameters of pre-operative distal femur in Japanese patients who received TKA, to investigate the differences in distal femoral anatomy between the genders, and to compare the measurements with the dimensions of femoral implants current used in Japan.

[Methods]

One-hundred seventy-nine Japanese patients who underwent TKA in Osaka Koseinenkin Hospital from April, 2009 to December, 2011 were included in this study. The genders and diagnoses were 25/ 154 patients (male/ female) and 143/ 36 patients [osteoarthritis (OA)/ rheumatoid arthritis (RA)], respectively. The mean age, height and body weight were 73.2 years, 152.2 cm and 56.7 kg, respectively. We measured the AP length, ML width, aspect ratio angle of distal femur. The measurement points on the medial condyle was 10 mm and on the lateral condyle was 8 mm from the lowest points of the medial and lateral posterior condyle to stimulate the optimal cutting thickness. We evaluated the relationship between AP length and ML width, or aspect ratio and ML width in diagnosis, alignment and gender. We also compared the measurements with the dimensions of femoral implants current used in Japan.

Continuous variables were assessed using the Mann-Whitney's U test. Relationship between AP length and ML width, or aspect ratio and ML width were assessed using simple regression analysis. Regression lines were assessed using analysis of covariance. For all tests, probability values (p values) of < 0.05 were considered to indicate statistical significance.


Orthopaedic Proceedings
Vol. 85-B, Issue SUPP_I | Pages 80 - 80
1 Jan 2003
Owaki H Hashimoto J Hayashida K Hashimoto H Ochi T Yoshikawa H
Full Access

[Objectives] Hallux valgus, dorsal sublaxation or dislocation of metatarsophalangeal joints and clawing of the lateral toes are seen frequently in patients with rheumatoid arthritis (RA). Resection arthroplasty of the metatarsophalangeal joints (MTP joints) are widely used to correct these forefoot deformities and the clinical results are almost good. However lateral toes tend to displace dorsally and painful callosity tends to recur. We used the metatarsal shortening offset osteotomy for shortening and dorsal/medial displacement of the prominent metatarsal head. In this report, we introduce the surgical techniques of shortening offset osteotomy and postoperative changes of plantar pressure measured with F-scan system (Tekscan, Inc. ), and review the short term result during 1 to 4 year follow-up.

[Materials and Methods] This study involved 26 feet of 18 patients with RA which were performed with the metatarsal osteotomy for lateral toes and followed more than 1 year (average follow-up 29 months, range 14–46 months). The average age of the 17 women and 1 man was 61 years (range, 51–77 years). The mean duration from the onset of RA to operation on the forefoot was 17 years (range, 7–42 years). Skin incision was placed on the dorsum of the foot and the extensor digitorum brevis and longus were severed (or elongated). After reposition of MTP joint, transverse osteotomy of distal fifth of the lateral metatarsal bone was performed with resection of few millimeters length metaphysial bone. Cortical bone of the distal end of the proximal stump was chiseled into a small rod between two ditches with rongeur and then the rod was put into medullary canal mortise of distal stump. This procedure make offset shift of metatarsal head medially or dorsally. Swanson implant arthroplasty, distal osteotomy was performed on the great toe. Postoperative clinical and radiological results were evaluated with AOFAS rating system. We measured dynamic plantar pressure before and one year after operation in one representative case.

[Results] At the time of follow-up, the mean AOFAS score was 80 points (59–95) and the mean pain score was 36 points. The recurrence of painful callosity was one case. Nevertheless, the range of motion of the MTP joint remained low: 30 degrees and less in 16 feet (62%) including 3 bony ankylosis of MTP joints. There was no nonunion case. [Discussion]

Resection arthroplasty has been accepted as the treatment of choice for forefoot deformities in RA patients. Recent advance of drug therapy against RA encouraged us to preserve the joint in correction of forefoot deformities. Our technique aimed at preservation of the function of the MTP joints and is suitable for mild deformities in which only one or two rays are involved. Furthermore it is easy to correct the deformity of spray foot and reduce the plantar prominence of metatarsal head. This study revealed the good clinical result in short term follow-up. Although the long term result must to be waited, this method is one of recommendable options for RA patients with forefoot deformities.