Abstract
INTRODUCTION
Acetabular cup malpositioning has been implicated in instability and wear-related complications after total hip arthroplasty. Although computer navigation and robotic assistance have been shown to improve the precision of implant placement, most surgeons use mechanical and visual guides to place acetabular components. Authors have shown that, when using a bean bag positioner, mechanical guides are misleading as they are unable to account for the variability in pelvic orientation during positioning and surgery. However, more rigid patient positioning devices may allow for more accurate free hand cup placement. To our knowledge, no study has assessed the ability of rigid devices to afford surgeons with ideal pelvic positioning throughout surgery. The purpose of this study is to utilize robotic-arm assisted computer navigation to assess the reliability of pelvic position in total hip arthroplasty performed on patients positioned with rigid positioning devices.
METHODS
100 hips (94 patients) prospectively underwent total hip Makoplasty in the lateral decubitus position from the posterior approach; 77 stabilized by universal lateral positioner, and 23 by peg board. After dislocation but prior to reaming, one fellowship trained arthroplasty surgeon manually placed the robotic arm parallel to both the longitudinal axis of the patient and the horizontal surface of the operating table, which, if the pelvis were oriented perfectly, would represent 0 degrees of anteversion and 0 degrees of inclination. The CT-templated computer software then generated true values of this perceived zero degrees of anteversion and inclination based on the position of the robot arm registered to a preoperative pelvic CT. Therefore, variations in pelvic positioning are represented by these robotic navigation generated values. To assure the accuracy of robotic measurements, cup anteversion and inclination at times of impaction were recorded and compared to those calculated via the trigonometric ellipse method of Lewinnek on standardized 3 months postoperative X-rays.
RESULTS
Mean alteration in anteversion and inclination values were 1.7 degrees (absolute value 5.3 degrees, range −20 – 20 degrees) and 1.6 degrees (absolute value 2.6 degrees, range −8 – 10 degrees) respectively. 22% of anteversion values were altered by >10 degrees; 41% by > 5 degrees. There was no difference between positioners (p=0.36) and regression analysis revealed that anteversion differences were correlated with BMI (p=0.02). Robotic navigation acetabular cup anteversion (mean 21.8 degrees) was not different from postoperative X-ray anteversion (mean 21.9 degrees)(p=0.50), nor was robotic navigation acetabular cup inclination (mean 40.6 degrees) different from postoperative X-ray inclination (mean 40.5 degrees)(p=0.34).
DISCUSSION AND CONCLUSION
Rigid pelvic positioning devices present 5 to 20 degrees of variability in acetabular cup orientation, particularly with regards to anteversion. Compounding this with 20 degree safe zones and prior author demonstrations that human error is prone to 10 degrees of anteversion inaccuracy in a fixed pelvis model, there is a clear need to pay particular attention to anatomic landmarks or computer assisted techniques to assure accurate acetabular cup positioning. Patient positioning by itself should not be trusted.
