Abstract
Revision of the failed femoral component can be challenging. Multiple reconstructive options are available and the procedure is technically difficult and thus meticulous pre-operative planning is required. The Paprosky Femoral Classification is useful as it helps the surgeon determine what bone stock is available for fixation and hence, which type of femoral reconstruction is most appropriate.
Type 1 Defect: This is essentially a normal femur and reconstruction can proceed as the surgeon would with a primary femur.
Type 2 Defect: The metaphysis is damaged but still supportive and hence a stem that gains primary fixation in the metaphysis can be used.
Type 3 Defect: The metaphysis is damaged and non-supportive and hence a stem that gains primary fixation in the diaphysis is required. Broken down into types “A” and “B” based on the amount of intact isthmus available for distal fixation.
Type 3A Defect: >4 cm of intact femoral isthmus is present. Can be managed with a fully porous coated stem, so long as the diameter is <18 mm and torsional remodeling is not present.
Type 3B Defect: There is < 4 cm of intact femoral isthmus and based on lower rates of osseointegration if a fully porous coated stem is used, a modular titanium tapered stem is recommended.
Type 4 Defect: The most challenging to manage as there is no isthmus available for distal fixation. Can be managed with proximal femoral replacement if uncontained and impaction grafting if contained. We have also successfully used modular titanium tapered stems that appear to gain “3-point fixation” in this type of defect.
