Abstract
Rotating Hinge total knee replacement designs are currently more frequently used for revision total knee replacement. As the designs of these implants have improved over time, the threshold for using them has been lowered. Cases of global instability and severe bone loss have not been adequately addressed by the standard use of unlinked constrained designs. Recurrent dislocation and polyethylene post failure due to cold flow and wear make the use of the unlinked designs insufficient to address the mechanical forces developed in a grossly unstable knee.
The linked rotating hinge designs have been able to address global ligamentous instability in four planes. Medial-lateral instability is well addressed by these implants. In cases of severe ankylosis with large flexion contractures, it is often necessary to resect the distal femur above the femoral insertions of the medial and lateral collateral ligaments. The absence of the tethering effect of severely contracted collateral ligaments demand the need for linked designs, although there has been reported success with the use of unlinked designs. Rotating hinges are particularly important for use in cases of recurvatum where an extension stop is incorporated in the design. The design permits slight hyperextension which permits application to clinical situations with incompetent quadriceps strength or paralysis.
The clinical results are quite acceptable even though most reports present 65–75% success rates. However, it should also be stated that these patient cohorts represent the most severe cases of revision surgery. Current hinged designs should continue to lower the threshold for use.
