Abstract
There are many types of articulating surfaces in uncemented acetabular cups. Most of the designs currently available are modular, with the shell snapping into a locking mechanism of some type. An Elliptical Monoblock design has been available for 15 years and was originally made of titanium with a factory assembled compression molded polyethylene liner. Porous tantalum (trabecular metal) was used as the shell material in a subsequent more recent design and in this design the polyethylene is actually molded directly into the tantalum framework.
Monoblock acetabular components do not allow particulate access to the ilium via screw holes and require no surgeon assembled locking mechanism which may increase backside wear and metallic debris. There are no holes in the socket because of the monoblock construct. Because of this absence of screw holes there is an inability to visualise the floor of the acetabulum and perfect coaptation between the shell and the acetabular floor may not occur. The presence of dome gaps of greater than 1.5mm have been noted in 5% of these components but these have not compromised implant stability and in a review of over 600 cups there has been no change in implant position. The Elliptical shape of the cup makes the mouth of the acetabular component 2mm greater than the dome so that an exceptionally strong acetabular rim fit results.
Results will be reported from two major institutional series with a minimum 10-year follow-up (range 10–15 years). No pelvic osteolysis was not seen in any patient in either series. In the HSS series of 250 cases with minimum 10 year follow up there were 4 revisions for instability but none for mechanical failure. There were three femoral revisions for loosening but the cup was intact and not revised in these patients. Utilising the Livermore measurement method polyethylene wear averages 0.8mm per year (0.6mm-1.3mm) and there have been no revisions for wear. Radiographic evaluation demonstrates stable bony interface in all patients. In a Mayo series of prospectively randomised patients also at minimum 10 years there was no lysis and only one case of aseptic loosening in a beaded titanium cup. At minimum 10-year follow up two similar elliptical monoblock cementless acetabular component designs with compression molded polyethylene have confirmed the theoretical advantages of this design concept and demonstrate long term results that have been excellent to date.
