Abstract
Introduction
Antibiotic loaded polymethyle methacrylate spacers are commonly used in the management of septic hip replacements.
Aim
The aim of this study was to determine wear patterns on the articulating surfaces of these spacers, as well as to determine the extent of PMMA particulate debris generation.
Method
We took tissue specimens around the acetabulae in 12 cases at the time of the second stage procedure for septic total hip revisions. These were subjected to histological analysis to determine the extent of PMMA particulate debris contamination. We also performed a basic explant retrieval analysis of the articulating surfaces of the PMMA spacers to determine any specific wear patterns.
Results
We found numerous PMMA particles in the acetabular soft tissues biopsied. The particle concentration was highest in the area of the acetabular fovea. We could also demonstrate specific wear patterns on the spacers that could be correlated with the generally mismatched articulating couple between the spacer and the bony acetabulum. We could also demonstrate some boney destruction present in the acetabulum with long-term spacer use.
Conclusions
We concluded that significant amounts of PMMA particulate debris are generated by these articulating antibiotic spacers. The total volume of this debris may be determined by specific wear patterns on the spacers’ surfaces. We recommend a thorough debridement to decrease the PMMA particle load generated. Consideration in respect of the bearing surface implanted after the explantation of the PMMA spacer should take into account the effect of the debris on the bearing surfaces. We also make recommendations in respect of the design of these PMMA spacers.
