Abstract
Acetabular component malpositioning is the most common reason for instability and wear resulting in revision total hip arthroplasty (THA). The current study aimed to assess a novel mechanical navigation device which was designed to simply and efficiently indicate appropriate cup orientation during surgery. The accuracy was compared to a series of hip arthroplasties performed using CT-based computer-assisted cup placement.
The study group consisted of 70 THAs performed using the mechanical device. The control group consisted of 146 THAs performed using CT-based computer navigation. Postoperative cup positioning was measured using a validated 2D/3D-matching method. An outlier was defined outside a range of ± 10 degrees from the planned inclination or anteversion.
In the study group the mean accuracy for inclination was 1.3 ± 3.4 (-6.6 – 8.2) and 1.0 ± 4.1 (-8.8 – 9.5) for anteversion with no outliers for either parameter. In the control group the accuracy for anteversion (3.0 ± 5.8 [-11.8 - 19.6]; p=0.6%) and the percentage of outliers (6.8%; p=3.3%) differed significantly. The accuracy for inclination (3.5 ± 4.1 [-12.7 - 9.5]; p=21.4%) and the percentage of ouliers (4.8%; p=9.9%) did not differ significantly.
The use of this mechanical navigation device can result in similar accuracy of acetabular cup orientation compared with CT-based surgical navigation. All cups were placed within a zone of ± 10 degree range of inclination and anteversion. This mechanical navigation device allows accurate cup navigation with minimal additional time and equipment.
