Abstract
Traditional instrumentation relies on rigid IM rods to determine the distal femoral resection which influences size and orientation of the femoral component. Anterior femoral bowing may unexpectedly affect implant sizing. The purpose of this study was to determine the sensitivity of a flexible rod to the femoral anterior bow versus a traditional rod.
A database of 93 Asian bone models from CT images was utilized. The bones were subdivided into those having proximal third, distal third, or overall femoral bows. Only the latter group was selected for further analysis, which consisted of 54 with an average bow of 98cm (±20cm). The rigid and flexible rods were placed iteratively so that the proximal portion of the rod touched the anterior cortical-cancellous boundary and no portion of the rod protruded through that boundary. The flexible rod was allowed to flex, as a substantially thin central portion flexes exclusively in the sagittal plane. The relative angle difference between the position of the flexible and rigid rod were calculated.
Three femura were chosen from the subset with bows of 123cm, 100cm and 78cm. The femura showed differences between the rigid and flexible rod of 7.5°, 4.5° while no significant angle measured for the smallest bow. Implants were virtually assembled onto the bones and the greatest bowed femur's component reduced one size from the rigid to the flexible rod orientation.
The results of this study show that higher bowed femura yielded larger angular deviations between rigid and flexible rods. For higher bowed femura, the flexible rod allows smaller components to be implanted. The flexible rod serves the same purpose as a conventional rod by defining the distal valgus orientation but allows component orientation in the sagittal plane closer to the femoral bow.
