Abstract
Osteoarthritis (OA) affects over 8.75 million people in the UK creating the need for early stage interventions. Osteochondral (OC) grafting has been used to repair full thickness lesions but the efficacy of this therapy is questionable.
As a first step in developing a testing framework able to predict the potential and suitability of OC grafts for repair, here, we present experimental data to be used in informing boundary conditions, input parameters and testing sequences for developing and verifying an FE model of the interaction of OC grafts and surrounding host tissue.
Ten OC cylindrical grafts (height: 10mm; diameter: n=5–6.5mm; n=5–8.5mm) were harvested from adult porcine femurs (60–70kg). Unconfined compression tests were conducted using an Instron3365 with a 500N load cell and a BioBath filled with PBS at 37ºC. The OC grafts (prior to separation of cartilage and bone) and cartilage underwent four 5% strain (of cartilage layer) steps with displacement rate of 0.005mm/sec, each followed by a 45-minute relaxation. Final strain was 20%. Bone underwent a single displacement of 20% strain of bone at same displacement rate.
Young's moduli ranged from 6.2–42.0MPa, 0.7–3.9MPa, 46.8–123.7MPa for OC graft, cartilage and bone, respectively. The coefficient of variance between OC Grafts, cartilage and bone was 70.6%, 71.8%, and 25.2%, respectively.
Dispersion between samples was high. This may be due to intrinsic tissue variability but also due to the testing protocol: for cartilage in particular, the load was at the low end of the load cell capacity and the sample aspect ratio was poor for compressive testing. This work provides insight in understanding the effect of individual patient's and/or individual grafts used during osteochondral grafting. The results compel the need to accurately model these tissues when developing specimen-specific FE models for OC grafting.
