VERTEBROPLASTY USING SMALL INJECTION VOLUMES CAN NORMALISE STRESS DISTRIBUTION ON THE VERTEBRAL BODIES AND REDUCE CEMENT LEAKAGE

Abstract

Purpose: To determine how cement volume during vertebroplasty influences:

1. stress distributions on fractured and adjacent vertebral bodies,

2. load-sharing between the vertebral bodies and neural arch, and

3. cement leakage.

Methods: Nineteen thoracolumbar motion segments from 13 cadavers (42–91 yrs) were loaded to induce fracture. Fractured vertebrae received two sequential injections (VP1 and VP2) of 3.5cm3 of polymethylmethacrylate cement. Before and after each injection, motion segment stiffness was measured in compression and in bending, and the distribution of compressive “stress” in the intervertebral disc was measured in flexed and extended postures. Stress profiles yielded the intradiscal pressure (IDP), stress peaks in the posterior (SPP) annulus, and the % of the applied compressive force resisted by the neural arch (FN). Cement leakage and vertebral body volume were quantified by water-immersion, and % cement fill was estimated.

Results: Bending and compressive stiffness fell by 37% and 50% respectively following fracture, and were restored only after VP2. Depending on posture, IDP fell by 59%–85% after fracture whereas SPP increased by 107%–362%. VP1 restored IDP and SPP to prefracture values, and VP2 produced no further changes. Fracture increased FN from 11% to 39% in flexion, and from 33% to 59% in extension. FN was restored towards pre-fracture values only after VP2. Cement leakage, IDP and compressive stiffness all increased with %fill.

Conclusions: 3.5cm3 of cement largely restored normal stress distributions to fractured and adjacent vertebral bodies, but 7cm3 were required to restore load-sharing between the vertebral bodies and neural arch. Risks of cement leakage increased with %fill.

Conflicts of Interest: None

Source of Funding: This work was funded by Action Medical Research and The Hospital Saving Association Charitable Trust. Vertebroplasty materials were provided by Stryker.