Abstract
During the last 15 years we have had the opportunity of analysing more than 700 UHMWPE prosthetic components (hip, knee and shoulder). Among them, about 500 were retrieved during revision surgery, while the remaining were new, ready-to implant, variably shelf-aged samples. The analysis of such a large, representative sample provided several important insights into the variables which influence the behaviour of UHMWPE in vivo; moreover, a long period of observation gave us the opportunity to follow changes and improvements in the field over time. All samples dated back to the nineties or before and sterilized with high energy radiation, either shelf-aged or retrieved, showed variable, but generally high, oxidation levels. Starting from the observation of these samples and with the aid of specimens irradiated on purpose under controlled conditions, some improvement has been achieved in the knowledge of radiation-induced oxidation process. The importance of the determination of hydroperoxides on the oxidation potential has been highlighted and the influence of variables such as sterilisation atmosphere, packaging, temperature and dose rate on the oxidation process has been clarified. The need for a suitable stabilizer to minimize oxidation arises during these studies.
We also had the opportunity of analysing a large number of EtO-sterilised samples, both new and retrieved. A small amount of them, all manufactured in the nineties, showed some bulk-oxidation which has been related to the presence of calcium stearate into the pristine resin. None of the newly produced, calcium stearate-free samples showed any oxidation and this group allowed to explore the behaviour of undegraded UHMWPE in vivo and in the shelf. Diffusion of polar compounds from the synovial fluid into polyethylene was observed in the majority of the retrieved samples. The nature of these products have been investigated along with their possible influence on the mechanical properties of the polymer.
In the last five years, we had the opportunity to study a significant number of crosslinked polyethylenes, both new and retrieved. The results of this study indicate that the variables of the crosslinking process can greatly influence final material properties and that not all cross-linked polyethylenes are the same.
The abstracts were prepared by incoming Professor Elena Brach del Prever. Correspondence should be addressed to IORS – President office, Dipartimento di Traumatologia, Ortopedia e Mediciana del Lavoro, Centro Traumatologico Ortopedico - Via Zuretti, 29 I-10135 Torino, Italy.
