Advertisement for orthosearch.org.uk
Orthopaedic Proceedings Logo

Receive monthly Table of Contents alerts from Orthopaedic Proceedings

Comprehensive article alerts can be set up and managed through your account settings

View my account settings

Visit Orthopaedic Proceedings at:

Loading...

Loading...

Full Access

THE INFLUENCE OF A ONE STEP REAMER-IRRIGATOR-ASPIRATOR TECHNIQUE ON THE INTRAMEDULLARY PRESSURE IN THE PIG FEMUR.



Abstract

Background: Increased intramedullary pressure in the femoral cavity causes intravasation of bone marrow content to the circulation which may lead to occlusion of pulmonary vessels and cardiorespiratory dysfunction. A one-step reamer-irrigator-aspirator (RIA) technique has been developed to reduce the intramedullary pressure (IMP) during the reaming procedure.

Material and method: In a randomized study in 19 Nor-wegian landrace pigs reamed intramedullary nailing was performed with two different reamer devices. Nine animals were operated with a traditional reamer and ten animals with RIA. One animal in the RIA group was excluded due to a perioperative femoral fracture, and three animals in the traditional group due to a perforation of the distal medial femoral cortex. The intramedullary pressure was registrated with a transducer-tipped pressure monitoring catheter during reaming.

Results: The highest intramedullary pressure during reaming was mean 33 mm Hg in the RIA group and 188 mm Hg in the traditional reamer group. This difference was significant (P < 0.05). Intramedullary pressures recorded before surgery, at the opening of the femoral cavity with an awl, by insertion of a guide wire, at insertion of the intramedullary nail, and ten minutes after nail insertion showed no significant differences between the groups.

Conclusion: The use of a one-step reamer-irrigator-aspirator technique in the pig femur induced less intramedullary pressure increase than the use of a traditional reamer.

Correspondence should be addressed to Ms Larissa Welti, Scientific Secretary, EFORT Central Office, Technoparkstrasse 1, CH-8005 Zürich, Switzerland