Advertisement for orthosearch.org.uk
Orthopaedic Proceedings Logo

Receive monthly Table of Contents alerts from Orthopaedic Proceedings

Comprehensive article alerts can be set up and managed through your account settings

View my account settings

Visit Orthopaedic Proceedings at:

Loading...

Loading...

Full Access

THE MECHANICAL STRENGTH AND GEOMETRIC AND DENSITOMETRIC PARAMETERS OF PQCT SCAN



Abstract

Background: The stability of fracture fixation is influenced by the type of fixation, densitometric and geometric structure of the bone. DXA measures the integral mass of trabecular and cortical bone mineral but cannot discriminate between the structurally and mechanically separate constitutes. Distribution and organisation of bone mass (the geometric structure) has the final determination of the mechanical properties of bone. Pq CT scan is able to measure densitometric and geometric parameters of bone structure. However, there are no reports in the literature on the relationship between these measurements and the strength of fracture fixation. Our aim is to study the correlation between geometric and densitometric measurements of Pq CT scan, with the strength of fixation of bicondylar tibial plateau fractures and to assess the role of both trabecular and cancellous bone in that strength.

Method: Eight Fresh frozen human cadaveric tibias were collected from subjects without a medical history of skeletal pathology. The proximal 10% of the tibia was scanned in a peripheral quantitative computer tomography scanner 1mm thick transverse slides, the cancellous and cortical bone mineral density of the proximal tibia were measured. The geometrical parameters: cortical area, trabecular area, bone strength index (BSI) and the Stress strain index (SSI) as non invasive indicators of the mechanical strength of the bone, were also calculated. A bicondylar tibial plateau fracture was simulated, stabilised, and then tested. All tibias were fixed with Dual buttress plating using a standard AO technique. Cyclic axial compression tests were performed. Inter-fragmentary shear displacements were measured using four extensometers. Failure was defined as over 3mm displacement.

Results: Except for the cortical density, there was a strong correlation between failure load and geometric and densitometric parameters. The trabecular density was the best predictor of fixation strength of tibial plateau fracture.

Discussion: Trabecular density is a more reliable parameter to measure than the cortical density. Therefore, the fixation strength of tibial plateau fracture is dominantly influenced by the mechanical properties of cancelous bone. Cortical bone has a secondary role.

These results highlight the importance of fixation techniques that rely on cancellous bone anchoring such as tensioned fine wire fixation in tibial plateau fractures.

Correspondence should be addressed to Carlos Widgerowitz, Honorary Secretary BORS, Division of Surgery and Oncology, Section of Orthopaedic and Trauma Surgery, Ninewells Hospital and Medical School, Tort Centre, Dundee DD1 9SY, Scotland.