O2512 ALOGRAFT SIZE AND IMPACTION FORCE IN REVISION HIP ARTHROPLASTY

Abstract

Introduction: It is well known that the integrity of the bone cement interface is crucial for the long-term survival of a primary total hip arthroplasty (THR). Revision THR with impaction bone grafting has recently offered a solution to gross bone loss due to osteolysis. As graft becomes incorporated, clearly the bone graft/ cement interface is as crucial as the equivalent interface in primary THR. Our aim was to examine factors that inßuence this interface. Method: The study was designed to mimic clinical practice. Fresh femoral heads were harvested from primary THR. These were morcelised into large and small particles. These were characterised. The bone was impacted into a purpose built jig with measured force. Cement was pressurised onto the dried surface of the impacted bone after measured mixing times. Cement pressurisation was measured. The cement/graft specimen was extracted and transected with a band saw. Cement penetration was measured with digital image analysis. Results: Large fragment size was 29 mm², and small was 7.1mm². Light impaction was 2.2 Atm. Medium and heavy were 2.6 Atm. and 3.2 Atm. respectively. Cement penetration was inversely proportional to impaction force. Cement mixing time also signiþcantly affected cement penetration. Particle size had no effect. Conclusion: Allograft should be adequately but not excessively impacted, to allow good cement incursion. Cement should be introduced and pressurised perhaps as early as two minutes. Fragment size does not affect cement penetration.