Advertisement for orthosearch.org.uk
Orthopaedic Proceedings Logo

Receive monthly Table of Contents alerts from Orthopaedic Proceedings

Comprehensive article alerts can be set up and managed through your account settings

View my account settings

Visit Orthopaedic Proceedings at:

Loading...

Loading...

Full Access

O1019 COMPUTER ASSISTED INSERTION OF HIP SCREW FOR INTER TROCHANTERIC FRACTURES



Abstract

Aims: Dynamic hip screw for intertrochanteric fractures is one of the most common procedures performed by orthopaedic surgeons. The prerequisite for proper placement of the implant is accurate insertion of the guide wire. The Computer Assisted Orthopaedic Surgical System [CAOSS] is designed to assist the surgeon by planning the trajectory based on one intra-operative AP and Lateral image from a C-Arm. Methodology: After closed reduction on the fracture table, two near orthogonal x-ray images containing the proximal femur with the registration phantom are obtained using a standard C-Arm and then processed after distortion correction. The phantom is supported by an end effector, which is continuously tracked in 3D space. Features of interest are extracted and the image registered in space through the evaluation of the phantom’s projection in the x-ray image. The versatility of the CAOSS is increased by the provision allowing the adjustment of the planned trajectory to the surgeon’s satisfaction. Once the trajectory is accepted, the surgeon implements the plan by moving a passive manipulator arm, while receiving visual positional cues from the computer in the form of a targeting screen. When the targeting is complete; the arm is locked in position and the trajectory implemented. Results: We present the results of the pilot clinical study involving 10 patients using this device. The results obtained were compared with an equal number of patients randomly selected from the complete neck of femur database, who had undergone a conventional DHS placement, during the last one-year. Accuracy of placement of the implant was assessed by an independent observer and by a previously validated computer program that assesses the accuracy from scanned post operative X-rays. The average targeting time was 6 minutes and overall there was no significant difference between the two groups.

Theses abstracts were prepared by Professor Dr. Frantz Langlais. Correspondence should be addressed to him at EFORT Central Office, Freihofstrasse 22, CH-8700 Küsnacht, Switzerland.