Abstract
Aims: A prospective study of the long term fixation of an all- polyethylene acetabular component with a 2mm rim for cement pressurisation, and methylmethac-rylate spacer beads for optimal cement mantle thickness. Methods: A consecutive series of 1348 hip arthroplasty patients aged between 23 and 94 (average 68 years) has been prospectively studied between 1993 and 2002. The cemented Ultima (De Puy) stem and cup were used via an anterolateral approach by 6 surgeons in a District General Hospital. Clinical and radiological assessment was at 0, 2, 5, 6, 7 and 8 years. Detailed assessment of the cup has been carried out to determine cases of clinical or radiological failure, quality of cement fixation to bone, and the profile of the cement mantle. Results: 875 patients have been followed up for a minimum of 2 years, 52 for a minimum of 8 years. The cumulative survival rate of the cup using revision for aseptic loosening as an endpoint at 8 years was 98% and using radiological evidence of loosening as an endpoint was 96%. There were no cases with less than 2 mm of cement mantle thickness and good quality bone cement interface was seen in all on the initial postoperative films indicating adequate pressurisation. Conclusions: The design of the Ultima polyethylene cup has been successful in achieving good cement pressurisation during implantation, an even cement mantle thickness, and clinical success rates which compare favourably with other cemented acetabular components.
Theses abstracts were prepared by Professor Dr. Frantz Langlais. Correspondence should be addressed to him at EFORT Central Office, Freihofstrasse 22, CH-8700 Küsnacht, Switzerland.
