Aims

Lumbar spinal stenosis (LSS) is a common skeletal system disease that has been partly attributed to genetic variation. However, the correlation between genetic variation and pathological changes in LSS is insufficient, and it is difficult to provide a reference for the early diagnosis and treatment of the disease.

First-time revision acetabular components have a 36% re-revision rate at 10 years in Australia, with subsequent revisions known to have even worse results. Acetabular component migration >1mm at two years following revision THA is a surrogate for long term loosening. This study aimed to measure the migration of porous tantalum components used at revision surgery and investigate the effect of achieving press-fit and/or three-point fixation within acetabular bone.

Between May 2011 and March 2018, 55 patients (56 hips; 30 female, 25 male) underwent acetabular revision THR with a porous tantalum component, with a post-operative CT scan to assess implant to host bone contact achieved and Radiostereometric Analysis (RSA) examinations on day 2, 3 months, 1 and 2 years. A porous tantalum component was used because the defects treated (Paprosky IIa:IIb:IIc:IIIa:IIIb; 2:6:8:22:18; 13 with pelvic discontinuity) were either deemed too large or in a position preventing screw fixation of an implant with low coefficient of friction. Press-fit and three-point fixation of the implant was assessed intra-operatively and on postoperative imaging.

Three-point acetabular fixation was achieved in 51 hips (92%), 34 (62%) of which were press-fit. The mean implant to host bone contact achieved was 36% (range 9-71%). The majority (52/56, 93%) of components demonstrated acceptable early stability. Four components migrated >1mm proximally at two years (1.1, 3.2, 3.6 and 16.4mm). Three of these were in hips with Paprosky IIIB defects, including 2 with pelvic discontinuity. Neither press-fit nor three-point fixation was achieved for these three components and the cup to host bone contact achieved was low (30, 32 and 59%).

The majority of porous tantalum components had acceptable stability at two years following revision surgery despite treating large acetabular defects and poor bone quality. Components without press-fit or three-point fixation were associated with unacceptable amounts of early migration.

Aims

Degenerative cervical spondylosis (DCS) is a common musculoskeletal disease that encompasses a wide range of progressive degenerative changes and affects all components of the cervical spine. DCS imposes very large social and economic burdens. However, its genetic basis remains elusive.

Aims

We aimed to evaluate the utility of ⁶⁸Ga-citrate positron emission tomography (PET)/CT in the differentiation of periprosthetic joint infection (PJI) and aseptic loosening (AL), and compare it with ^99mTc-methylene bisphosphonates (^99mTc-MDP) bone scan.

First-time revision acetabular components have a 36% re-revision rate at 10 years in Australia, with subsequent revisions known to have even worse results. Acetabular component migration >1mm at two years following revision THA is a surrogate for long term loosening. This study aimed to measure the migration of porous tantalum components used at revision surgery and investigate the effect of achieving press-fit and/or three-point fixation within acetabular bone.

Between May 2011 and March 2018, 55 patients (56 hips; 30 female, 25 male) underwent acetabular revision THR with a porous tantalum component, with a post-operative CT scan to assess implant to host bone contact achieved and Radiostereometric Analysis (RSA) examinations on day 2, 3 months, 1 and 2 years. A porous tantalum component was used because the defects treated (Paprosky IIa:IIb:IIc:IIIa:IIIb; 2:6:8:22:18; 13 with pelvic discontinuity) were either deemed too large or in a position preventing screw fixation of an implant with low coefficient of friction. Press-fit and three-point fixation of the implant was assessed intra-operatively and on postoperative imaging.

Three-point acetabular fixation was achieved in 51 hips (92%), 34 (62%) of which were press-fit. The mean implant to host bone contact achieved was 36% (range 9–71%). The majority (52/56, 93%) of components demonstrated acceptable early stability. Four components migrated >1mm proximally at two years (1.1, 3.2, 3.6 and 16.4mm). Three of these were in hips with Paprosky IIIB defects, including 2 with pelvic discontinuity. Neither press-fit nor three-point fixation was achieved for these three components and the cup to host bone contact achieved was low (30, 32 and 59%).

The majority of porous tantalum components had acceptable stability at two years following revision surgery despite treating large acetabular defects and poor bone quality. Components without press-fit or three-point fixation were associated with unacceptable amounts of early migration.

There have been several studies examining the association between the morphological characteristics seen in acetabular dysplasia and the incidence of the osteoarthritis (OA).

However, most studies focus mainly on acetabular morphological analysis, and few studies have scrutinised the effect of femoral morphology. In this study we enrolled 36 patients with bilateral acetabular dysplasia and early or mid-stage OA in one hip and no OA in the contralateral hip. CT scans were performed from the iliac crest to 2 cm inferior to the tibial tuberosity, and the morphological characteristics of both acetabulum and femur were studied.

In addition, 200 hips in 100 healthy volunteer Chinese adults formed a control group. The results showed that the dysplastic group with OA had a significantly larger femoral neck anteversion and a significantly shorter abductor lever arm than both the dysplastic group without OA and the controls. Femoral neck anteversion had a significant negative correlation with the length of the abductor lever arm and we conclude that it may contribute to the development of OA in dysplastic hips.

Cite this article: Bone Joint J 2014; 96-B:1586–93.

The purpose of this study was to undertake a meta-analysis to determine whether there is lower polyethylene wear and longer survival when using mobile-bearing implants in total knee replacement when compared with fixed-bearing implants. Of 975 papers identified, 34 trials were eligible for data extraction and meta-analysis comprising 4754 patients (6861 knees). We found no statistically significant differences between the two designs in terms of the incidence of radiolucent lines, osteolysis, aseptic loosening or survival. There is thus currently no evidence to suggest that the use of mobile-bearing designs reduce polyethylene wear and prolong survival after total knee replacement.

Cite this article: Bone Joint J 2013;95-B:1057–63.

Purpose: Persistent radiculopathy secondary to lumbar disc herniation is a common problem that greatly compromises quality of life. In North America, lumbar discectomies are among the most common elective surgical procedures performed. There is still much debate about when conservative or surgical treatments should be offered to patients. Although the related literature is comprehensive, there are limited systematic reviews on the prognostic factors predicting the outcome of lumbar discectomy. The purpose of this review is to define the preoperative factors predicting clinical outcome after lumbar discectomy.

Method: We conducted a computerized literature search using Ovid Medline and the Cochrane Central Register of Controlled Trials. We included randomized controlled trials or prospective studies dealing with lumbar disc surgery. The preoperative predictors had to be clearly identified and correlated with outcome measures in terms of pain, disability, work capacity, analgesia consumption, or a combination of these measures. We assessed the articles as high or low quality studies using the Newcastle-Ottawa Quality Assessment Scale, and summarized the results of High Quality Studies.

Results: A total of 39 articles were included. The two most prominent negative predictors were Workers’ Compensation status and depression according to 6 studies. Poor predictors reported in 4 articles were female gender, increasing age, and prolonged duration of leg or back pain. Lower education level, smoking, and higher levels of psychological complaints were negative predictors in 3 articles. A positive Lasègue sign was a positive predictor in 7 articles. Absence of back pain, positive patient expectations, and higher income were good prognostic factors in 3 studies. Patients with contained herniations did worse than those who had uncontained disc extrusions and sequestrations according to 4 studies. The level of herniation was not a predictive factor in 7 studies.

Conclusion: Workers’ Compensation, depression, greater back versus leg pain, increasing age, female gender, contained herniations, and prolonged symptoms predict unfavourable postoperative outcomes after lumbar discectomy. Positive Lasègue sign, higher income, uncontained herniations, and positive patient expectations predict favourable postoperative outcomes. The level of herniation is not an established prognostic factor. The results of this review provide a preliminary framework for patient selection for lumbar disc surgery.

Purpose: Perispinal core muscle strength has been theorized to be an important component in the pathogenesis of back pain. Recent research has demonstrated a strong association between preoperative perispinal musculature, adjusted for fatty infiltration and prospective outcomes and improvements in back pain in patients undergoing lumbar laminectomy without fusion. The purpose of this study is to determine if a similar relationship exists in patients undergoing elective posterior lumbar fusion and decompression (PLFD) surgery.

Method: A retrospective observational study of prospectively collected outcomes data was conducted in which pre-operative function and patient variables of those undergoing PLFD were derived from a functional status questionnaire and medical records. ImageJ Digital Imaging Software was utilized to measure the total (CSA) and percentage of fatty infiltration of the psoas, multifidus, and erector spinae muscles in pre-operative L4 axial CT images. Pre-operative and post-operative lateral images were evaluated for degree of post-operative adjacent level degeneration. Follow-up consisted of a functional status questionnaire. Outcomes measured were improvements in back pain, leg pain, and Oswestry disability scores.

Results: Twenty-three patients were analyzed with a mean follow-up of 2 years (range 1 – 5 years). Outcomes improved following surgery. There were strong to moderate correlations between percentage of fat in the pre-operative posterior spinal muscles and improvements in leg pain (r = 0.63, p = < 0.001) and improvements in back pain (r = 0.41, p = 0.05). There was a moderate trend towards greater adjacent level degeneration (r = 0.37, p = 0.1) in patients with higher percentage of fat in the pre-operative posterior spinal muscles. There was a strong relationship between greater adjacent level degeneration and pre-operative disability as measured by the Oswestry (r = 0.62, p = 0.03).

Conclusion: The results demonstrate that a potential relationship exists between pre-operative fatty infiltration of posterior perispinal muscles and post-operative outcomes, and adjacent level degeneration following lumbar fusion surgery. This suggests that perispinal muscle atrophy and conditioning may play a role in these outcomes. Results may be used for prognostication, surgical candidate selection, and interventional strategies.