header advert
Results 1 - 11 of 11
Results per page:
Orthopaedic Proceedings
Vol. 105-B, Issue SUPP_3 | Pages 110 - 110
23 Feb 2023
Francis S Murphy B Elsiwy Y Babazadeh S Clement N Stoney J Stevens J
Full Access

This study aims to implement and assess the inter and intra-reliability of a modernised radiolucency assessment system; the Radiolucency In cemented Stemmed Knee (RISK) arthroplasty classification. Furthermore, we assessed the distribution of regions affected by radiolucency in patients undergoing stemmed cemented knee arthroplasty.

Stemmed knee arthroplasty cases over 7-year period at a single institution were retrospectively identified and reviewed. The RISK classification system identifies five zones in the femur and five zones in the tibia in both the anteroposterior (AP) and lateral planes. Post-operative and follow-up radiographs were scored for radiolucency by four blinded reviewers at two distinct time points four weeks apart. Reliability was assessed using the kappa statistic. A heat map was generated to demonstrate the reported regions of radiolucency.

29 cases (63 radiographs) of stemmed knee arthroplasty were examined radiographically using the RISK system. Intra-reliability (0.83) and Inter-reliability (0.80) scores were both consistent with a strong level of agreement using the kappa scoring system. Radiolucency was more commonly associated with the tibial component (76.6%) compared to the femoral component (23.3%), and the tibial anterior-posterior (AP) region 1 (medial plateau) was the most affected (14.9%).

The RISK classification system is a reliable assessment tool for evaluating radiolucency around stemmed knee arthroplasty using defined zones on both AP and lateral radiographs. Zones of radiolucency identified in this study may be relevant to implant survival and corresponded well with zones of fixation, which may help inform future research.


Orthopaedic Proceedings
Vol. 105-B, Issue SUPP_2 | Pages 24 - 24
10 Feb 2023
Truong A Wall C Stoney J Graves S Lorimer M de Steiger R
Full Access

Obesity is a known risk factor for hip osteoarthritis. The aim of this study was to compare the incidence of obesity in Australians undergoing hip replacements (HR) for osteoarthritis to the general population.

A cohort study was conducted comparing data from the Australian Bureau of Statistics and the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) from 2017-18. Body mass index (BMI) data for patients undergoing primary total hip replacement and resurfacing for osteoarthritis were obtained from the AOANJRR. The distribution of HR patients by BMI category was compared to the general population, in age and sex sub-groups.

During the study period, 32,495 primary HR were performed for osteoarthritis in Australia. Compared to the general population, there was a higher incidence of Class I, II, and III obesity in patients undergoing HR in both sexes aged 35 to 74 years old. Class III obese females and males undergoing HR were on average 6 to 7 years younger than their normal weight counterparts. Class III obese females and males aged 55-64 years old were 2.9 and 1.7 times more likely to undergo HR, respectively (p<0.001).

There is a strong association between increased BMI and relative risk of undergoing HR. Similar findings have been noted in the United States of America, Canada, United Kingdom, Sweden and Spain. A New Zealand Registry study and recent meta-analysis have also found a concerning trend of Class III obese patients undergoing HR at a younger age.

Obese Australians are at increased risk of undergoing HR at a younger age. A national approach to address the prevalence of obesity is needed.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_XXIII | Pages 59 - 59
1 May 2012
Buckland A Dowsey M Stoney J Hardidge A Ng K Choong P
Full Access

The triple taper polished cemented stem (C-stem, DePuy) was developed to promote calcar loading, and reduce proximal femoral bone resorption and aseptic loosening. We aimed to evaluate the changes in peri-prosthetic bone mineral density using Dual Energy X-ray Absorbtiometry (DEXA) after total hip arthroplasty (THA) using the C-stem prosthesis.

One hundred and three patients were recruited voluntarily through and single institution for THA. The prosthesis used was the triple-taper polished cemented C-Stem (De Puy, Warsaw, Indiana, USA). DEXA scans were performed pre- operatively, then at day for, three months, nine months, 18 months and 24 months post-operativley. Scans were analysed with specialised software (Lunar DPX) to measure bone mineral density (BMD) in all seven Gruen zones at each time interval. Changes in calcar BMD were also correlated with patient age, sex, surgical approach, pre-operative BMD and post-operative mobility to identify risk factors for periprosthetic bone resorption.

One hundred and three patients underwent 103 primary THA over a five-year period (98 osteoarthritis; 5 AVN). No femoral components were loose at the two year review and none were revised. The most marked bone resorption occured in Gruen zones 1 and 7, and was best preserved in zone 5. BMD decreased rapidly in all zones in the first three months post-operatively, after which the rate of decline slowed substantially. BMD was better preserved medially (zones 6 and 5) than laterally (zones 2 and 3) at 24 months. There was delayed recovery of BMD in all zones except zones 4 and 5.

High pre-operative T-scores (>2.0) in the spine, ipsilateral and contralateral femoral neck were associated with the higher post-operative BMD and less bone resorption at all time intervals in Gruen zone 7. Pre-operative osteopenia and osteoporosis were associated with low BMD and accelerated post-operative bone resorption in zone 7.

Patients whose mobility rendered them housebound had lower post-operative BMD, and accelerated post-operative BMD loss in zone 7 when compared to non-housebound patients. Females had a lower post-operative BMD and greater loss of BMD in zone 7. Patient age and surgical approach did not effect post-operative BMD or rate of bone resorption in zone 7.

The triple-taper femoral stem design did not show an increase in periprosthetic bone density at the proximal femur at two years post-operative. Calcar bone resorption is accelerated by low pre-operative BMD, poor post-operative mobility, and in females. Age and surgical approach do not have significant effects on calcar bone remodelling.


Orthopaedic Proceedings
Vol. 92-B, Issue SUPP_I | Pages 193 - 193
1 Mar 2010
Dowsey M Broadhead M Stoney J Choong P
Full Access

Australia is a society with a diverse mix of people, cultures and languages. Patients presenting at our institution in 2006 who underwent TKA originated from 39 countries and 14 different languages were represented. Little is reported on the outcomes for non-English speaking patients undergoing Orthopaedic surgery. We conducted a prospective study to determine if outcomes were comparable for English and non-English patients undergoing TKA. A prospective observational study of 278 consecutive, primary TKA was undertaken from January to December 2006. Pre-operative Body Mass Index (BMI), patient demographics, co-morbidities, operative data, complications, length of stay and discharge destination were recorded. Functional status was measured preoperatively and 12 months post TKA using the International Knee Society Score (IKS). An interpreter was used for non-English speaking patients for Surgeon assessment and consent, pre-admission assessment and during the in-patient stay. A total of 41 patients (15%) were non-English speaking and of these 38 were female. No patient was lost to follow-up and 94% of patients completed the IKS evaluation at 12 months. The median age, ASA scores and number of co-morbidities were comparable between English and non-English speaking patients presenting for TKA. Median BMI was higher in the non-English speaking group 33.2 kg/m2 compared to English speaking 30.9 kg/m2, (p=0.010). There were no differences in the length of stay, discharge destination or complication rates between the 2 groups. Median preoperative IKS scores were poorer in non-English speaking patients (61) compared to English speaking patients (72), (p=0.002). At 12 months the difference in IKS scores between the 2 groups was even greater. The median score for non-English speaking patients was (116), compared to (142) in English speaking patients. Of the total IKS evaluation, poorer ratings for pain was the predominant cause for the lower scores in non-English speaking patients compared to English speaking patients, p=0.016. Active flexion was also slightly poorer at 12 months in non-English speaking patients 102° compared to English speaking patients 110°, (p=0.075). As there were significant differences in BMI and gender between English speaking and non-English speaking patients, we analyzed English speaking patients separately for differences in outcomes according to BMI and gender. We found no difference in the IKS scores based on these variables.

Although non-English speaking patients undergoing TKA achieved comparable outcomes in the acute phase following surgery, this did not equate to achieving the same functional result at 12 months, compared to English speaking patients. Pain was the predominant cause for poorer results. Further exploration of patient expectations and pain management is required for non-English speaking patients.


Orthopaedic Proceedings
Vol. 90-B, Issue SUPP_I | Pages 167 - 167
1 Mar 2008
Hollinghurst D Stoney J Ward T Gill H Beard D Newman J Murray D
Full Access

Medial unicompartmental replacement (UKR) has been shown to have superior functional results to total knee replacement (TKR) in appropriately selected patients, and this has been associated with a resurgence of interest in the procedure. This may relate to evidence showing that the kinematic profile of UKR is similar to the normal knee, in comparison to TKR, which has abnormal kinematics. Concerns remain over the survivorship of UKR and work has suggested the anterior cruciate ligament (ACL) may become dysfunctional over time. Cruciate mechanism dysfunction would produce poor kinematics and instability providing a potential mechanism of failure for the UKR.

Aim: To test the hypothesis that the sagittal plane kinematics (and cruciate mechanism) of a fixed bearing medial UKR deteriorate over time (short to long term).

A cross sectional study was designed in which 24 patients who had undergone successful UKR were recruited and divided into early (2–5 years) and late (> 9 years) groups according to time since surgery. Patients performed flexion/extension against gravity, and a step up. Video fluoroscopy of these activities was used to obtain the Patellar Tendon Angle (PTA), the angle between the long axis of the tibia and the patella tendon, as a function of knee flexion. This is a previously validated method of assessing sagittal plane kinematics of a knee joint.

This work suggests the sagittal plane kinematics of a fixed bearing UKR is maintained in the long term. There is no evidence that the cruciate mechanism has failed at ten years. However, increased tibial bearing conformity from ‘dishing’, and adequate muscle control, cannot be ruled out as possible mechanisms for the satisfactory kinematics observed in the long term for this UKA.


Orthopaedic Proceedings
Vol. 90-B, Issue SUPP_I | Pages 167 - 167
1 Mar 2008
Hollinghurst D Stoney J Ward T Gill H Beard D Ackroyd C Murray D
Full Access

Functional outcome after patellofemoral joint replacement (PFA) for osteoarthritis remains inconsistent. It is believed that functional outcome for joint replacement is dependent upon postoperative joint kinematics. Minimal disruption of the native joint, as in PFA, should produce more normal kinematics and improved outcome. No previous studies have examined joint kinematics after isolated PFA.

Aim: To investigate the sagittal plane kinematics of patellofemoral replacement and compare with the normal knee.

Twelve patients who had undergone successful PFA at least two years previously were recruited. Patients performed flexion/extension against gravity, and a step up. Video fluoroscopy of these activities was used to obtain the Patellar Tendon Angle (PTA), the angle between the long axis of the tibia and the patella tendon, as a function of knee flexion. This is a previously validated method of assessing sagittal plane kinematics of a knee joint. The kinematic profile of the PFA joints was compared to the profiles for fourteen normal knees.

Overall, the kinematic plot obtained for PFA reflected similar trends to that for normal knees; but the PTA was slightly but significantly increased throughout the entire range of flexion (two degrees). This is equivalent to an average displacement of the lower pole of the patella of 1.5mm.

Sagittal plane knee kinematics after PFA are much more normal than after TKR and this should give improved functional outcome. The observed increase in PTA through range may result from increased patella thickness or a shallow trochlear groove and may influence patellofemoral contact forces.


Orthopaedic Proceedings
Vol. 87-B, Issue SUPP_III | Pages 344 - 344
1 Sep 2005
Hollinghurst D Stoney J Ward T Robinson B Price A Gill H Beard D Dodd C Newman J Ackroyd C Murray D
Full Access

Introduction and Aims: Single compartmental replacement procedures are increasingly preferred over total knee replacement (TKR) for single compartment osteoarthritis of the knee joint. Theoretically, reduced disruption of the native joint should produce more normal kinematics. This study aimed to describe and compare the sagittal plane kinematics of four different, commonly used devices.

Method: Four groups of patients who had undergone successful single compartment replacement at least two years previously were recruited. Fifteen following Oxford medial UKA, 12 following medial St Georg Sled UKA, five following Oxford lateral UKA, and 12 following Avon PFJ replacement. Patients performed flexion/extension against gravity, and a step-up during video fluoroscopy. The Patellar Tendon Angle (PTA), the angle between the long axis of the tibia and the patella tendon, was obtained as a function of knee flexion. This relationship provides indication of sagittal movement between femur and tibia through range and has been validated as a reliable measure of joint kinematics.

Results: The kinematic profile for each group was compared to that of the profile for 12 normal and 30 TKR (AGC) knees. All three tibiofemoral devices produced knee kinematics similar to the normal knee. The PTA was found to have a linear relationship to flexion angle, decreasing with increasing knee flexion angle. No such linear relationship exists for the TKR joint, which display abnormal kinematics. The PF device also reflected similar trends to that for normal knees except that the PTA was moderately increased throughout the entire range of flexion (three degrees).

Conclusion: In contrast to TKR, all single compartmental knee replacements provided kinematics similar to the normal joint. The kinematic pattern of the PFJ replacement may be of most interest as the observed increase in PTA through range could influence patello-femoral contact forces


Orthopaedic Proceedings
Vol. 87-B, Issue SUPP_III | Pages 326 - 327
1 Sep 2005
Choong P Stoney J Love B
Full Access

Introduction and Aims: Computer-assisted surgery may significantly improve the accuracy of total knee arthroplasty. The reproducibility of acquiring points that facilitate the computer generation of joint morphology which is fundamental for guiding surgery remains unclear. The aim of this study was to assess inter- and intra-operator reproducibility using a computer guidance system.

Method: Three surgeons were involved in this study, who under instruction from a proprietary computer system acquired points on a sawbone model of the knee that correlated with specific anatomic landmarks. This process was performed five times each and repeated on another identical model. The points acquired allowed the computer to generate a knee joint model that predicted size, orientation and alignment of the knee joint. Inter- and intra-operator comparisons of the size of the prostheses, the amount of resection, the rotation of the prostheses, and the relationship of the epicondylar to the posterior femoral condylar axis were made.

Results: This study was commenced one day after an eight-hour hands-on workshop describing the use of the computer guidance system. The computer system accurately recorded the acquisition of points on a sawbone model. There was little difference in the time taken by each surgeon to acquire the points. Although, all iterations of point acquisition were performed sequentially, there was no clear reduction in the time taken for the process of acquisition. Despite the repetitive use of identical sawbone models, all three surgeons demonstrated significant variation within their own and between each others’ acquisitions. This resulted in variations of prosthetic sizes, amounts of bone resection and rotation of implants. The consistency at which certain indices differed suggested a specific bias between surgeons that may reflect technique or interpretation of anatomic landmarks, e.g. relationship between the epicondylar and posterior condylar axes.

Conclusion: An important reason for the variation may be the difference in interpretation of the location of anatomic landmarks. This may have a significant impact on the generation of computer model for guiding subsequent surgery. Clear definitions of landmarks and a robust education program is required if computer assisted surgery is to be accurate and meaningful.


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_IV | Pages 441 - 441
1 Apr 2004
Hollinghurst D Stoney J Ward T Pandit H Beard D Murray D Ackroyd C
Full Access

Aim: To study the sagittal plane kinematics of the Avon patello-femoral replacement (Stryker-Howmedica), PTA.

Introduction: Replacement of the patello-femoral joint for end stage osteoarthritis has previously been associated with inconsistent results. Retention of the cruciate ligaments is likely to be important in maintaining normal kinematics and hence improved functional outcome.

Methodology: Twelve patients who had undergone Avon PFR least two years previously were recruited following ethical approval. American Knee Society, Bristol and Oxford knee scores were obtained. Patients performed open chain flexion and extension against gravity, in addition to closed chain step up. Video fluoroscopy of these activities was used to obtain the Patellar Tendon Angle (PTA), which is the angle between the long axis of the tibia and the patella tendon, at specific angles of knee flexion. This is a previously validated method of assessing the kinematic profile of a knee joint. These measurements were used to determine the kinematic profile of each knee and they were then compared to a group of twelve normal knees.

Results: A one way ANOVA revealed no significant differences between the kinematic profile following Avon PFR and that of the normal knee. All patients had good or excellent knee scores.

Conclusion: The kinematic profile after Avon PFR is similar to that of the normal knee. In contrast all TKRs we have studied have abnormal kinematics, which are associated with abnormal patello-femoral joint loading. This suggests that isolated PFR should have a functional advantage over TKR.


Orthopaedic Proceedings
Vol. 86-B, Issue SUPP_I | Pages 75 - 76
1 Jan 2004
Lankester BJA Stoney J Gheduzzi S Miles AW Bannister GC
Full Access

Introduction: Aseptic loosening is the main cause of revision in hip replacement surgery. Improved cementation techniques have reduced the rate of loosening of the femoral component, leaving the cemented acetabular cup as the major problem, with reported loosening rates as high as 25% at 12 – 15 years. The ideal method of acetabular cementation has not been fully evaluated.

Aim: To determine the ideal thickness of cement mantle to resist torsional forces.

Method: Mahogany blocks with a 54mm hemispherical hole were used to simulate an acetabular socket. Machined aluminium cups were created in 5 sizes (52mm to 44mm) to give a cement mantle that varied in size from 1mm to 5mm. Three 10mm keyholes were drilled in the blocks and appropriate-sized spacers were inserted to ensure the mantle was accurate and even. Silicone grease was used to prevent any micro-interlock between cement and wood. The cups were then cemented into the wooden blocks using vacuum-mixed Palacos R cement and left to cure in air for 7 days at 37 °C. The constructs were tested to failure using a servo-hydraulic testing machine. Each experiment was repeated six times.

Results: The stiffness of the cement mantle varied according to thickness as follows:

Thickness (mm) Stiffness (Nm / Degree)
1 58 +/− 4
2 37 +/− 1
3 39 +/− 1
4 25 +/− 0.3
5 24 +/− 0.3

Discussion: A stiffer cement mantle will transfer more torque to the bone-cement interface, possibly leading to earlier loosening of the prosthesis. This biomechanical analysis suggests that surgeons should aim to achieve a mantle at least 2mm thick. There appears to be little further mechanical advantage gained if the mantle is increased in thickness beyond 4mm.


The Journal of Bone & Joint Surgery British Volume
Vol. 80-B, Issue 3 | Pages 452 - 455
1 May 1998
Stoney J O’Brien J Wilde P

We treated 22 patients with type-two odontoid fractures in halothoracic vests for six to eight weeks followed by a Philadelphia collar for four weeks. Eighteen patients were reviewed by questionnaire and radiography at a mean of 40 months after injury. We assessed union, fracture position, the degree of permanent pain and stiffness, satisfaction with the treatment and the outcome.

The overall union rate was 82%. Posterior malunion with residual posterior displacement or angulation was associated with a higher incidence of persisting pain. The position at union did not correlate with the residual cervical stiffness. Fractures failed to unite in four patients (18%) none of whom had late neurological sequelae, although they had more late pain. There were associations between the development of nonunion and an extension-type injury, age over 65 years and delay in diagnosis.