Obesity is a common in individuals undergoing arthroplasty, and the potential for weight loss with improved mobility may be expected by some. The aim of this study was 1. determine the proportion that achieved weight loss after hip or knee arthroplasty, and 2. examine the effect of obesity on patient reported outcomes (PROMS) and satisfaction with surgery.

Participants underwent primary TKA or THA between July 2015 and December 2020 and consented to participation in a research database with baseline PROMS, including weight, BMI, Oxford Knee, or Hip Score, and EQ5D. Participants repeated PROMS at 12 months after surgery with additional questions regarding satisfaction with surgery.

3449 patients completed PROMS 1 year after arthroplasty with weight and BMI. There were 1810 THA and 1639 TKA procedures. The mean baseline BMI was higher in TKA (29.8, SD 5.2) compared to THA (27.7, SD 5.0), p=0.001. A higher proportion of TKA were classified as obese class 1 (29% TKA, 19% THA), obese class 2 (11% TKA and 6% THA), and obese class 3 (5% TKA and 2% THA), p=0.001. The mean weight loss after 1 year was 0.4kg and 0.9kg in obese THA subjects and TKA subjects respectively. In the obese >5kg weight loss was achieved in 13% of TKA and 7% of THA (p=0.001). Obese experienced equivalent improvement in Oxford scores, compared to non-obese subjects. Satisfaction with surgery was reported by 95% of THA and 91% of TKA subjects with no significant differences between BMI group grades (p=0.491 THA and p=0.473 TKA).

Preoperative obesity was observed in 44% of TKA and 27% of THA subjects. In the obese only 1 in 10 subjects lost 5kg or more over 12 months. Obese patients experienced equivalent improvements in outcome after arthroplasty and rates of satisfaction with surgery to the non-obese.

Introduction

The direct anterior approach (DAA) for total hip arthroplasty continues to gain popularity. Consequently, more procedures are being performed with the patient supine. The approach often utilizes a special leg positioner to assist with femoral exposure. Although the supine position may seem to allow for a more reproducible pelvic position at the time of cup implantation, there is limited evidence as to the effects on pelvic tilt with such leg positioners. Furthermore, the DAA has led to increased popularity of specific softwares, ie. Radlink or JointPoint, that facilitate the intra-op analysis of component position from fluoroscopy images.

The aim of this study was to assess the difference in cup orientation measurements between intra-op fluoroscopy and post-op CT.

Introduction

Hip arthroplasty is one of the most common procedures performed every year however complications do occur. Prior studies have examined the impact of insurance status on complications after TJA in small or focused cohorts. The purpose of our study was to utilize a large all-payer inpatient healthcare database to evaluate the effect of patient insurance status on complications following hip arthroplasty.

Introduction

Knee arthroplasty is one of the most common inpatient surgeries procedures performed every year however complications do occur. Prior studies have examined the impact of insurance status on complications after TJA in small or focused cohorts. The purpose of our study was to utilize a large all-payer inpatient healthcare database to evaluate the effect of patient insurance status on complications following knee arthroplasty.

Objectives

The high revision rates of the DePuy Articular Surface Replacement (ASR) and the DePuy ASR XL (the total hip arthroplasty (THA) version) have led to questions over the viability of metal-on-metal (MoM) hip joints. Some designs of MoM hip joint do, however, have reasonable mid-term performance when implanted in appropriate patients. Investigations into the reasons for implant failure are important to offer help with the choice of implants and direction for future implant designs. One way to assess the performance of explanted hip prostheses is to measure the wear (in terms of material loss) on the joint surfaces.

Retrieval studies of metal-on-metal (MOM) resurfaced hips revealed cup “edge wear” as a common failure mechanism [Morlock-2008]. Retrieval analysis of total hip arthroplasty (THA) also demonstrated extensive rim wear (Fig. 1: 190–220o arcs), typically across the superior cup [Clarke-2013]. Such wear patterns have not been demonstrated in hip simulator studies. The simulator “steep cup” models typically had motion arcs (flexion, etc.) input via the femoral head [Leslie-2008, Angadji-2009]. With fixed-inclination cups this produces constant loading of cup rim against the head (Fig. 2a). This is unlikely to be the physiological norm, unless patients walk constantly on the rims of mal-positioned cups. More likely the patients produce edge-wear intermittently due to functional and postural variations. Therefore a novel simulator model is proposed in which the cup undergoes edge-wear intermittently at one extreme of flexion (Fig. 2a). Our study objective using this new simulator model (Fig. 2a, b) was to (i) demonstrate MOM wear-rates and wear patches as a function of these dynamic-inclinations (40 o, 50 o, 70o), and (ii) compare the simulator data to MOM retrievals (Fig. 1).

Two simulator studies were run, both using 60mm MOM. Four bearings were run to 1-million cycles (1Mc) with cups peaking at 40 and 50° dynamic-inclinations, thus providing control data with no edge-wear. In 2nd study, 4 MOM were run with cups given a dynamic-inclination of 70° to produce edge-wear effects. In study-2 currently at 2.5Mc duration, the femoral heads showed the two classical wear phases with run-in at 1.7mm³/Mc and steady-state at 0.084mm³/Mc (Fig. 3a). Wear-rate for cups at 2.34mm³/Mc was 40% higher than heads and continued to rise linearly with time (Fig. 3a). At 2.5Mc, cup wear averaged ×5.7 greater than heads and resulting wear-patterns extended 85°−225° around cup rim (Fig. 3b: average 151°). In study-1, wear patches in cups with 40° dynamic-inclination approached within 12.4mm of the cup rim as denoted by circumferential grooves. This margin-of-safety (MOS) represented a 24°angle. The cup wear-patch averaged area of 1,760mm2. With cups run at 70o dynamic-inclination, the wear patches were transferred an additional 30o towards the rim thereby representing a 6° transfer across the rim.

This is the 1st wear study to use the new dynamic-inclination test mode to better simulate cup function in vivo. It was particularly satisfying to see the similarity in wear-patterns between retrieval (Fig. 1) and simulator cups (Fig. 3b). It is also the 1st study to monitor sites and magnitudes of cup wear areas and to purposely produce “edge wear”. The cups with 40° and 50° dynamic-inclinations had large margins of safety. With 70° dynamic-inclination the margin of safety was lost - effectively there was a 6° transfer of the wear patch across the cup rim. Even this apparently small effect at one location in each gait cycle sufficiently perturbed MOM performance that wear increased by an order of magnitude. Notably this was all cup wear and not by femoral head participation. The study continues but at 2.5Mc duration the cups revealed 5-fold greater wear than heads.

Metal-on-metal (MOM) retrieval studies have demonstrated that CoCr bearings used in total hip arthroplasty (THA) and resurfacing (RSA) featured stripe wear damage on heads, likely created by rim impact with CoCr cups.^1-3 Such subluxation damage may release quantities of large CoCr particles that would provoke aggressive 3^rd-body wear. With RSA, the natural femoral neck reduces the head-neck ratio but avoids risk of metal-to-metal impingement (Fig. 1).⁴ For this study, twelve retrieved RSA were compared to 12 THA (Table 1), evaluating, (i) patterns of habitual wear, (ii) stripe-wear damage and (iii) 3^rd-body abrasive scratches. Considering RSA have head/neck ratios much lower than large-diameter THA, any impingement damage should be uniquely positioned on the heads.

Twelve RSA and THA retrievals were selected with respect to similar diameter range and vendors with follow-up ranging typically 1–6 years (Table 1). Patterns of habitual wear were mapped to determine position in vivo. Stripe damage was mapped at three sites: polar, equatorial and basal. Wear patterns were examined using SEM and white light interferometry (WLI). Graphical models characterized the complex geometry of the natural femoral neck in coronal and sagittal planes and provided RSA head-neck ratios.⁴

Normal area patterns of habitual wear were similar on RSA and THA bearings. The wear patterns showing cup rim-breakout proved larger for RSA cups than THA. Polar stripes presented in juxtaposition to the polar axis in both RSA and THA (Fig. 1). As anticipated, basal stripes on RSA occurred at steeper cup-impingement angles (CIA) than THA. The micro-topography of stripe damage was similar on both RSA and THA heads. Some scratches were illustrative of 3^rd-body wear featuring raised lips, punctuated terminuses, and crater-like depressions (Fig. 2).

Neck narrowing observed following RSA procedures may be a consequence of impingement and subluxation due to the small head-neck ratios. However, lacking a metal femoral neck, such RSA impingement would not result in metal debris being released. Nevertheless it has been suggested that cup-to-head impingement produced large CoCr particles and also cup “edge wear” as the head orbits the cup rim.⁴ Our study showed that impingement had occurred as evidenced by the polar stripes and 3^rd-body wear by large hard particles as evidenced by the wide scratches with raised lips. We can therefore agree with the prior study, that 2-body and 3rd-body wear mechanisms were present in both RSA and THA retrievals.

We report the medium term outcome of a 15 degrees face-changing acetabular cup in THA due to secondary OA in DDH.

We analysed 28 Hips in 26 patients who underwent THA between May 2007and September 2009. There were 20 females and 6 males with a mean age of 52 yrs (range 33–68yrs).

All patients received a cementless Exceed Advanced Bearing Technology 15° Face-changing cup (Biomet) with a ceramic liner through a posterior approach. A cementless or a cemented femoral stem, with 28 or 32mm Biolox Delta ceramic head, was used in all cases. All patients started full weight-bearing the next day. The average clinical and radiological follow-up was for 50 months (range 36–76 months). The mean Harris Hip Score improved to 94 and the Oxford Hip Score improved to 44. There was 100% survivorship of the hip joint for both components.

Post-operative radiographs revealed integration of the cup with no signs of loosening or osteolysis. The mean covered acetabular lip inclination angle was 51 degrees (range 43–61)and the true inclination angle of the bearing was 36 degrees (range 28–46).

The clinical results support the use of the cementless 15 degrees face-changing acetabular cup in the dysplastic acetabulum.

We retrospectively reviewed the mid term outcome of 88 MoM THA in 84 patients and 21Hip Resurfacing using Recap Magnum bearing surface performed during 2006 – 2009.

There were 41 males and 47 females in the THA group and 17 males and 4 females in the Hip Resurfacing group.

All procedures were performed through a posterior approach. The average head size for the THR group was 46mm and the cup size was 52mm and the average head size for the resurfacing was 50mm and cup size was 56mm respectively.

Median age for the THA group was 60 yrs. (28–73) and for the Resurfacing it was 51.5 yrs. (32–62). Average follow up was 76 months for the THA group and 78 months for the Resurfacing group.

Average serum cobalt for the THA and the Resurfacing groups were 53.2nmol/l (119) and 30.85 and the Chromium levels were 82.44nmol/l(134.5) and 67.49 respectively. Eight MRI scans showed abnormal fluid collections suspicious of ARMD in the THA group and 2 showed fluid collection in the Resurfacing group. There were five revisions in the THA group with the tissue diagnosis of ALVAL. In all except one case a well fixed uncemented stem (Taperloc) was retained.

In our series Recap Magnum on a Taperloc stem showed 94% survival at five years and therefore we continue to review the cases annually with serum cobalt chromium levels and MRI scans.

1) INTRODUCTION

Total knee arthroplasty (TKA) is one of the most common orthopaedic procedures performed, and is projected to exponentially increase over the next 20 years. As primary TKA cases increase, so does the frequency of revisions. The primary goals for all TKA cases include alleviating pain and improving overall knee function. The objective of this study was to evaluate the change in outcomes as measured by the Knee Society Score (KSS) between primary and revision TKA systems.

Introduction:

Revision total knee arthroplasty (TKA) can be very complex in nature with difficulties/obstacles involving bone and soft tissue deficits, visualization and exposure, as well as alignment and fixation. Auxiliary devices such as augmentation and offset adapters help address these issues; however they increase the complexity of the reconstruction. The objective of this study was to show that use of a single radius revision TKA system allowing for minimal auxiliary revision devices can yield positive early clinical outcomes.

Hip and knee arthroplasties are very common operations in the UK with over 70000 hip and over 80000 knee arthroplasties taking place in England and Wales in 2011. Fortunately mortality following these operations is rare. However it remains important to understand the incidence and causes of death, in order to manage risk where possible and to inform the consent process.

This study aimed to evaluate the incidence and causes of death within 30 days after undergoing hip or knee arthroplasty in our unit and to highlight possible risk factors.

We looked at 30 day mortality in all patients undergoing hip or knee arthroplasty in our institution between 2005 and 2011. Data on post-operative deaths was derived from the Scottish Arthroplasty Project and correlated with procedural and demographic data from our hospital Patient Administration System (PAS). The notes of all patients who had died within a period of 30 days post-operatively were reviewed to collect data on co-morbid conditions, pre-operative investigations, post-operative thromboprophylaxis and cause of death. All primary and revision knee and hip arthroplasties including bilateral procedures were included. Arthroplasty for trauma was excluded.

A total of 12,243 patients underwent hip or knee arthroplasty within the study period. 59% were female and the mean age was 68 (range 21–91). During this time period the standard protocol was to use aspirin for thromboprophylaxis. Eleven patients died following surgery giving a mortality rate of 0.09%. The most common cause of death was myocardial infarction (7/11 patients).

Our finding of a mortality rate of 0.09% is similar or lower to those found in previous studies. To our knowledge this is the first series of this size looking at mortality from hip and knee arthroplasty within a single centre in the UK.

Primary internal fixation of uncomplicated scaphoid fractures is growing in popularity due to its advantages over conventional cast fixation. Performing the procedure percutaneously reduces the risk of infection and soft tissue damage, but can be tricky because of the small size and complex three-dimensional (3D) shape of this bone. Computer-assisted navigation has been an invaluable tool in other pin insertion procedures.

This in-vitro study aimed to evaluate two different rendering techniques for our navigation interface: (i) 3D volume rendering of the CBCT image to show digitally-reconstructed radiographs of the anatomy, and (ii) volume-slicing, analogous to CT-images.

As the shape of the scaphoid is highly variable, a plastic model of the wrist was constructed in order to provide consistency that would not be possible in a cadaver-based study. The plastic model featured a removable scaphoid such that a new one was replaced between trials. Three surgeons each performed eight trials using each of the two navigated techniques (yielding a total of 48 trials for analysis). Central placement of scaphoid fixation has been linked with mechanical stability and improved clinical outcomes, thus the surgical goal was to place a K-wire to maximise both depth from the surface and length of the drill path. The wire was drilled through the scaphoid, from distal to proximal, allowing for post-trial analysis of the drill path. A ceiling-mounted OptoTrak Certus camera (Northern Digital Inc., Canada) and a floor-mounted isocentric 3D CBCT C-arm (Innova 4100, GE Healthcare, France) permitted a registration transformation between the tracking and imaging systems to be computed preoperatively, before each trial, using a custom calibration device. Optical local coordinate reference bodies were attached to the wrist model and a custom drill guide for tracking with the Certus camera. During each trial, a 3D spin image of the wrist model was acquired, and rendered according to the technique under study.

For 3D volume rendering, the spin image was rendered as a digitally-reconstructed radiograph (DRR) that could be rotated in three dimensions. In the planning phase, the surgeon positioned a desired drill path on the images. Anterior-posterior and lateral views of the 3D volume rendering were used for navigation during the drilling phase. The real-time orientation of the drill guide was shown relative to these images and the plan on an overhead.

For volume-sliced (VS) navigation, the spin image was volume-rendered and sliced along the principal planes (axial, coronal, sagittal) for planning. A slider interface allowed the surgeon to scroll through the slices in each of the planes, as if they were looking at individual CT slices. Once the desired drill path was positioned, the volume-sliced views were reconfigured to show slices along the oblique planes of the planned path for navigation.

Following all trials, model scaphoids with wire intact were imaged using CT with a slice thickness of 0.625 mm. The CT series were segmented and used to construct 3D digital models of the wire and drilled scaphoid. Algorithms were developed to determine the minimum distance from the centerline of the wire and the scaphoid surface, and to compute the length of the drill path. Screw breach should be avoided as it disrupts the articular surface and may lead to a sequela of cartilage deterioration and osteoarthritic changes. The shortest distance measure was extrapolated to assess whether a standard fixation screw (Accutrak Mini, 1.78 mm radius) would have breached the scaphoid surface. There were three screw breaches noted in the 3D DRR trials, while only one occurred using volume-slicing. The minimum distance from the centerline of the wire to the scaphoid surface can also be thought of as a “safe zone” for screw breach. Although no difference in the mean distance (μ) was noted between groups (μ_DRR = 2.3 mm, μ_VS = 2.2 mm), the standard deviation (σ) was significantly higher for the DRR trials (σ_DRR = 0.50 mm, σ_VS = 0.37 mm, p < 0.1), suggesting a higher reliability of central placement using VS for navigation. In contrast, the length of the drill paths were significantly longer for the DRR trials (μ = 28.7 mm, σ = 0.66 mm) than for VS-navigation (μ = 28.3 mm, σ = 0.62 mm) at p < 0.1.

The surgical goal was to pick a path that maximised both the length of the path, as well as the minimum distance from the scaphoid surface. Algorithms were developed to find the paths that would maximise: (i) the length and (ii) the distance from the surface of the model scaphoid used in this study. The maximum possible length was 29.8mm (with a minimum distance of 2.2mm from the scaphoid surface), and the maximum distance was 3.3mm (with a length of 27.5mm). Therefore, the set of optimal drill paths had length > 27.5 mm, and distance > 2.8 mm. Of the DRR-navigated trials, 11 were below the minimum optimal depth, and only one trial was below the optimal length; 13 of the 24 trials (54%) were of both optimal length and depth. Of the VS-navigated trials, nine were below the minimal optimal distance, and four were below the minimum optimal length; 11 out of 24 trials (46%) were within both the optimal length and depth.

From this comparative study, we conclude that VS-navigation was superior in locating a central location for the fixation wire, while DRRs were superior in maximising the depth of the drill path. Thus, we propose a hybrid interface, incorporating both volume-slicing and DRRs, in order to maximise the effectiveness of navigation for percutaneous scaphoid pinning.

Femoroacetabular impingement is a condition in which the femoral head/neck region abnormally contacts the acetabulum, limiting the range of motion of the hip and often associated with pain, damage, and loss of function. The pathophysiology of osteoarthritic changes stemming from impingement syndromes has been linked to the shape of the hip; however, little is known about the influence of the soft tissues to this process.

In this pilot study, we used computer-assisted navigation technology to track motion on a cadaver that had mild bilateral cam-impingement lesions, and then performed a virtual simulation to locate sites of impingement. We hypothesised that soft tissues contribute to the degree and location of impingement, so we compared impingements across three different dissection states: (i) all soft tissues intact; (ii) post-capsulectomy; with only the labrum and ligamentum teres remaining; and (iii) disarticulated, with labrum and ligamentum teres removed.

With ethical approval, we used one fresh frozen cadaver pelvis that was sectioned above the fifth lumbar vertebra and at the knee. The femurs and pelvis were implanted with fiducial screws as an accurate means for surface-based image registration. With all soft tissues intact, tissues were imaged using computed tomography with a slice thickness of 0.625 mm. The CT scans were imported into Mimics (v13.0, Materialise, Belgium) and carefully segmented, with particular detail to the articular regions and fiducials, to create 3D digital models of the pelvis and femurs.

On each side, optical local coordinate reference (LCR) bodies were attached at the proximal femur and iliac crest to permit spatial tracking with an Optotrak Certus camera (Northern Digital Inc., Waterloo, Canada). The 3D digital models were imported into the VSS navigation system (iGO Technologies, Kingston, Canada) and scrupulously registered to the anatomy using the fiducial screws and a calibrated probe. The pose of the femur and pelvis were recorded throughout a series of twelve movements involving various combinations of flexion-extension, abduction-adduction, internal-external rotation and circumduction, as well as functional movements typical of a clinical hip screening. Soft tissues were selectively removed and the movements were repeated post-capsulectomy and completely disarticulated.

The recorded pose data were applied to the 3D digital models to perform a computational simulation of the movements during the trials. The pose data were expressed in coordinates of the anterior pelvic plane to compute angles of motion in the principal directions (flexion, abduction, rotation). The motion data were further filtered so that only comparable ranges of motion were present for data analysis. Algorithms were developed to determine bone-on-bone impingement locations by finding contact points between the models.

Impingement locations were plotted on the digital models of the femur and pelvis in order to establish zones of impingement. The surface area of each impingement zone was computed by using a Crust-based algorithm that triangulated impingement points encompassing a region, and then summed the surface area of each triangle to estimate the total impingement surface area.

Upon visual inspection, it was immediately apparent that impingements tended to occur in well-defined regions. On the femur, these were found along aspects of the head-neck junction, especially on or near osteophytes. On the pelvis, impingement regions were found along the acetabular rim and extending into the lunate region.

With soft tissues intact, both femurs and pelvis had prominent anterior and posterior impingement zones. In contrast, post-capsulectomy impingement zones were predominately confined to the anterior region. It should be noted, however, that the total impingement area decreased post-capsulectomy, representing only about 25% of the total area of impingements when all soft tissues were intact. This was also true in the disarticulated state.

Both femurs had mild posterior cam lesions, the right worse than the left. Impingements were seen at these sites with soft tissues intact, but diminished almost entirely post-capsulectomy. The anterior lesions were located contra coup to these cam lesions.

With soft tissues intact, impingements tended to occur in external rotation and abduction. With soft tissues removed there was a pronounced shift towards impingements occurring in internal rotation. Impingements were also noted in large flexion angles and large abduction-adduction angles in the absence of soft tissues.

Although it is widely accepted that the hip is spherical in shape and has ball-and-socket kinematics, recent work suggests that the osteoarthritic hip is aspherical and that translational motion is present. On a very limited series, this work is supportive of the latter observation: if hip motion is purely spherical, a decrease in impingements post-capsulectomy is exceedingly hard to describe. However, if soft tissues cause translatory motion, then their absence logically should lead to a change in the impingement pattern (which we found).

This preliminary study provides a methodology for studying the effects of soft tissue on impingements. We conclude that soft tissues do indeed play an important role in impingement and may even contribute to the development of impingement lesions. Limitations include a small sample size, so further studies are required prior to conclusively establishing impingement patterns in passive kinematics of cadaver hips.

Magnetic Resonance Imaging (MRI) is the cornerstone investigation for cervical disc disease (CDD). However, MRI changes suggestive of CDD are found in people above forty, even in asymptomatic healthy individuals [1].

Mere presence of MRI changes of CDD does not exclude the presence of concomitant extra-foraminal pathology.

No study design.

We present here a series of three cases where use of ‘high resolution ultrasound’ has allowed accurate diagnosis of concomitant extra-foraminal pathology in patients with MRI-proven CDD. The three cases were acute neuropraxia of aberrant C5 nerve root, anterior interossous nerve compression due to pseudo-aneurysm of brachial artery and ‘acute brachial neuritis’ respectively.

No outcome measure.

Use of diagnostic high resolution ultrasound revealed accurate diagnosis of concomitant extra-foraminal pathology in all three cases. The cases with acute neuropraxia and acute brachial neuritis recovered with conservative treatment. Pseudo-aneurysm was treated successfully with surgery.

High resolution ultrasound of the brachial plexus and peripheral nerves may be useful in following scenarios to identify an extra-foraminal pathology: (1) when symptoms and signs are out of proportion to the MRI findings of CDD; (2) when there is obvious discordance between MRI and nerve conduction findings; (3) where an entrapment neuropathy is suspected but the site of nerve lesion cannot be located.

Introduction

PIPJ replacement has become increasingly popular however, there is very little clinical data available apart from small studies and those from the originators of the prostheses. We present a review of our initial experience with the Acension^(c) Pyro-carbon PIP joint.

While there are many variation laboratory and clinical studies using metal-on-metal (MOM) bearings after introduction of the 28mm MOM THR in 1988, the mapping of wear phenomena in such retrieval cases has been mimimal. In laboratory study, 28mm MOM bearing’s wear-rate was low with “run-in” and “steady-state” than large diameter MOM without theory of fluid-filum lubrication. In clinical results were not superior to the same way of laboratory study. We present a detailed analysis of 33 retrieved MOM hip bearings with 1–11 years follow-up,

We compiled 33 retrieval cases (MetasulTM: Zimmer/CenterPulse Inc., Austin, TX) including clinical information, ion concentrations from ball diameters, cup designs and stripe wear damage. The bearing surfaces were mapped using reflected light microscope (RLM), white light interferometer (Zygo Newview 600, Zygo.) and SEM(XL-30 FEG). Wear maps were constructed according to types of surface wear identified.

Patients ranged from 36 to 76 years of age (Means: 56.9 years); 54% were males. Main causes for revision were progressive radiographic lines around the cups, osteolysis and pain. The 28mm ball diameter was used in 86% of cases (largest = 52mm ball). The CoCr liner incorporated a polyethylene adaptor in 75% of cases. Cup diameter > 50mm was present in 75% of cases. Eight femoral stems were recovered and all showed major impingement marks around the neck and five also had a metallosis (Mode-4A). Stripe wear was evident on 71% of CoCr balls with medial stripes twice as common as lateral. Stripe wear was identified in 25% of CoCr liners and extended 25–160° circumference around the liners. Clear liner rim damage was present in 10 (30%) and 3 demostrated severe damage of polyethelene adaptors.

There are many limitations to such retrieval studies. These data are biased to cases that failed due to hip pain, radiographic signs of progressive osteolysis and some with high levels of metal ions. There was also the bias of having predominantly a CoCr sandwich design (polyethylene adaptor in 75% of cases). In early 1980s, the thin walled UHMWPE cup was introduced and used larger diameter balls for decreased risk of dislocation. However, unfortunally these big-ball cups produced significant PE wear debris, and diameter trends were returned to the Chanley’s small-ball paradigm again. In the same time (late of 1980’s), these second-generation MOM (28,32mm) was introduced for low wear characteristics alternate THR bearings, with sacrificing of joint stability and motion range. However, use of the small ball added well-known risks of impingement, subluxation and dislocation with rigid cups. In this study, using the ‘damage modes’ from McKellop, normal mode-1 wear occurred in only 14% of cases whereas modes 2–4 had an incidence approaching 30% each and signs of cup impingement were evident in 64% of cases. Thus summarizing MOM wear phenomena in “small” 28mm sandwich cup designs, there was retrieval evidence showing that damage modes 2–4 likely placed these patients at risk for adverse wear effects.

From 1985 metal-on-metal (MOM) designs of resurfacing (RSA) and total hip arthroplasties (THR) have been available over a large diameter range (28–60mm). In-vitro studies indicated satisfactory low wear performance for all designs and diameters tested (wear = 0.1 to 7 mm3). While reports from many centers have been encouraging, some have reported adverse effects. We reviewed clinical and metal ion studies in large diameter retrievals and compared these to 28mm MOM cases. Patients with the latter THR ranged 36–76 years of age and were followed 9–11 years. Main finding in our revisions was osteolysis and pain. The 28mm ball was represented 86% of cases; 71% balls had stripe wear. For liners, 25% had circumferential stripe wear and impingement was evident in 64% cases. Seven cemented stems were recovered with impingement marks; 26 stems were undamaged and therefore not revised. Using the concept of ‘damage modes’ from McKellop, normal wear mode #1 was evident in only 14% of 28mm retrievals whereas incidence of ‘abnormal’ modes #2-4 approached 30% each. Thus the 28mm MOM appeared susceptible to impingement risks with CoCr liners. Summarizing MOM retrievals, damage modes 2–4 were most likely implicated in revisions. The performance of such ‘small diameter’ THRs will be contrasted to our large diameter THR and RSA experience. The questions to be reviewed include, how much of the reported MOM adversity was predictable and how much risk was due to

wear of small diameter MOM,

Introduction: Pulmonary embolism (PE) is a potentially fatal complication of total joint arthroplasty (TJA). Therefore, reliable means for diagnosis and evaluation of severity is essential. This study evaluates the reliability of common clinical signs and symptoms in the diagnosis of PE. In addition, clinical presentation is correlated with size and location of emboli within the pulmonary vasculature (segmental, lobar, or main).

Methods: The clinical and imaging records of all patients with confirmed diagnosis of PE following TJA performed between 2000 and 2004 were reviewed in detail. The mode of presentation and the subsequent imaging findings were noted.

Results: A total of 132 confirmed PE cases were studied. Clinical presentation included dyspnea (19.7%), chest pain (7.6%), change of mental status (6.8%0, hypotension (6.1%), and diaphoresis (3.8%). Mean room air pulse-oximetry was 85.5%. Arterial sampling showed mean O2 saturation of 88.1% and pO2 of 58.7. There was not a direct correlation between the size of the PE and the clinical presentation. However, there was a correlation between the severity of oxygen desaturation and the size and location of the embolus.

Conclusions: The presentation of PE can be non-specific and highly variable ranging from mild dyspnea to catastrophic hemodynamic collapse. Common clinical signs have a low sensitivity for diagnosis and do not correlate with severity of disease. The only correlation seemed to be measured arterial O2 saturation and pressure. Thresholds for the diagnosis of clinically significant pulmonary embolisms need to be established to improve management of this important condition.

INTRODUCTION: Range of motion following TKA is a commonly assessed and important outcome parameter. The reported knee ROM is often measured using manual goniometers. The accuracy of goniometer in measuring ROM of the knee is not known. We compared the knee ROM measured with a manual goniometer and compared that to measurements obtained from computer assisted navigation system.

METHODS: This prospective ongoing study has so far recruited 60 patients (71 knees) undergoing TKA by a single surgeon. Measurements of the ROM were performed intraoperatively using a 14 inch 360° Nexgen Baseline® goniometer, validated by physical therapists, and the Stryker knee navigation system^™. Consistent anatomical landmarks were used to obtain flexion and extension measurements. Each goniometer and navigation measurement was performed twice by the same reader.

RESULTS: Goniometer was more inaccurate in measuring the knee ROM than the navigation. There was a 5.07° difference between two measurements obtained with the goniometer compared to a mean discrepancy of 1.15° using the navigation system. Further, the ROM measured by navigation was on average 13.9° larger than that measured by the goniometer. BMI affected the ROM recording obtained by both the goniometer and the navigation system.

DISCUSSION AND CONCLUSION: This study indicates that goniometer is not an accurate tool for measurements of knee ROM as there is a marked discrepancy between two goniometer readings. The navigation system seemed to produce more consistent, but markedly higher, readings than a manual goniometer. Reported results on knee ROM in the literature need to be interpreted with caution and scrutinized for potential inaccuracy of the measuring tool.