Advertisement for orthosearch.org.uk
Results 1 - 9 of 9
Results per page:
Bone & Joint Open
Vol. 5, Issue 7 | Pages 534 - 542
1 Jul 2024
Woods A Howard A Peckham N Rombach I Saleh A Achten J Appelbe D Thamattore P Gwilym SE

Aims

The primary aim of this study was to assess the feasibility of recruiting and retaining patients to a patient-blinded randomized controlled trial comparing corticosteroid injection (CSI) to autologous protein solution (APS) injection for the treatment of subacromial shoulder pain in a community care setting. The study focused on recruitment rates and retention of participants throughout, and collected data on the interventions’ safety and efficacy.

Methods

Participants were recruited from two community musculoskeletal treatment centres in the UK. Patients were eligible if aged 18 years or older, and had a clinical diagnosis of subacromial impingement syndrome which the treating clinician thought was suitable for treatment with a subacromial injection. Consenting patients were randomly allocated 1:1 to a patient-blinded subacromial injection of CSI (standard care) or APS. The primary outcome measures of this study relate to rates of recruitment, retention, and compliance with intervention and follow-up to determine feasibility. Secondary outcome measures relate to the safety and efficacy of the interventions.


The Bone & Joint Journal
Vol. 100-B, Issue 10 | Pages 1270 - 1274
1 Oct 2018
Manta A Opingari E Saleh A Simunovic N Duong A Sprague S Peterson D Bhandari M

Aims

The aims of this systematic review were to describe the quantity and methodological quality of meta-analyses in orthopaedic surgery published during the last 17 years.

Materials and Methods

MEDLINE, EMBASE, and PubMed, between 1 January 2000 and 31 December 2016, were searched for meta-analyses in orthopaedic surgery dealing with at least one surgical intervention. Meta-analyses were included if the interventions involved a human muscle, ligament, bone or joint.


Bone & Joint Research
Vol. 7, Issue 1 | Pages 85 - 93
1 Jan 2018
Saleh A George J Faour M Klika AK Higuera CA

Objectives

The diagnosis of periprosthetic joint infection (PJI) is difficult and requires a battery of tests and clinical findings. The purpose of this review is to summarize all current evidence for common and new serum biomarkers utilized in the diagnosis of PJI.

Methods

We searched two literature databases, using terms that encompass all hip and knee arthroplasty procedures, as well as PJI and statistical terms reflecting diagnostic parameters. The findings are summarized as a narrative review.


Orthopaedic Proceedings
Vol. 99-B, Issue SUPP_2 | Pages 92 - 92
1 Jan 2017
Gatin L Saleh-Mghir A Laurent F Verdier M Ghout I Tattevin P Crémieux A
Full Access

In a new rabbit model of carbapenem-resistant Klebsiella pneumoniae knee-prosthesis infection, we studied the efficacy of colistin cement alone or in combination with systemic intramuscular (i.m.) injections of colistin.

Seven days after infection, surgical debridement and removal of the infected prostheses were performed, and rabbits were randomly assigned to one of four different treatment groups of twelve rabbits: prosthesis replacement by drug-free cement spacer (control) prosthesis replacement by colistin-loaded cement spacer (3 MUI of colistin/40 g of cement) (colistin local), prosthesis replacement by drug-free cement spacer and i.m. colistin (12 mg/kg of body weight, three time a day for 7 days), or colistin local + i.m.

We observed a statistically significant difference (p = 0.049) between the colistin local + systemic group and the control group in the criteria of number of rabbits with sterile bone under the total number of rabbits.

Combination of systemic and local colistin could be an interesting therapeutic option to cure carbapenem-resistant Klebsiella pneumoniae peri prosthetic joint infection.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 518 - 518
1 Dec 2013
Saleh A Gad B Higuera C Klika A Iannotti J Barsoum W
Full Access

Background:

Acetabular component malpositioning in total hip arthroplasty increases the risk of dislocations, impingement, and long-term component wear. The purpose of this Sawbones study was to define the efficacy of a novel acetabular imprinting device (AID) with 3D preoperative planning in accurately placing the acetabular component.

Methods:

Four surgeons performed the study on osteoarthritic and dysplastic Sawbone models using 3 different methods for placing the acetabular component (total n = 24). The 3 methods included (1) standard preoperative planning and instrumentation (i.e., standard method), (2) 3D computed tomographic (CT) scan planning and standard instrumentation (i.e., 3D planning method), and (3) 3D CT scan planning combined with an acetabular imprinting device (i.e., AID method). In the AID method, 3D planning software was used to virtually place the acetabular component at 40° of inclination and 22° of anteversion and create a parallel guide pin trajectory. A patient-specific surrogate bone model with a built-in guide pin trajectory was then manufactured as a stereoltihography device (Fig. 1A). The surgeon molded bone cement into the acetabulum imprinting the acetabular features while maintaining the guide pin trajectory (Fig. 1B). Afterward, the AID was removed from the surrogate bone model and placed onto the Sawbone, ensuring a secure fit (Fig. 1C). A guide pin was drilled into the Sawbone along the prescribed trajectory. With the guide pin in place, the surgeon could ream the acetabulum and impact the acetabular component using the guide pin as a visual aid (Fig. 1D). Postoperatively, a CT scan was used to define and compare the actual implant location with the preoperative plan. Statistical analysis was performed as 3 group comparisons using the chi-squared test for categorical data and analysis of variance (ANOVA) for continuous measurements.


Orthopaedic Proceedings
Vol. 95-B, Issue SUPP_34 | Pages 545 - 545
1 Dec 2013
Szubski C Small T Saleh A Klika A Pillai AC Schiltz N Barsoum W
Full Access

Introduction:

Primary total knee arthroplasty (TKA) is associated with perioperative bleeding, and some patients will require allogenic blood transfusion during their inpatient admission. While blood safety has improved in the last several decades, blood transfusion still carries significant complications and costs. Transfusion indications and alternative methods of blood conservation are being explored. However, there is limited nationally representative data on allogenic blood product utilization among TKA patients, and its associated outcomes and financial burden. The purpose of this study was to use a national administrative database to investigate the trends in utilization and outcomes (i.e. in-hospital mortality, length of stay, admission costs, acute complications) of allogenic blood transfusion in primary TKA patients.

Methods:

The Nationwide Inpatient Sample (NIS), the largest all-payer inpatient care database representing a 20% stratified sample of United States hospitals, was utilized. Primary TKA (ICD-9-CM 81.54) cases from 2000 to 2009 were retrospectively queried (n = 4,544,999; weighted national frequency). A total of 67,841 admissions were excluded (Figure 1). The remaining 4,477,158 cases were separated into two study cohorts: (1) patients transfused with allogenic blood products (red blood cells, platelets, serum) (n = 540,270) and (2) patients not transfused (n = 3,936,888). Multivariable regression and generalized estimating equations were used to examine the effect of transfusion on outcomes, adjusting for patient/hospital characteristics and comorbidity.


Orthopaedic Proceedings
Vol. 90-B, Issue SUPP_I | Pages 183 - 183
1 Mar 2008
Saleh A Tarabichi S larsen S
Full Access

In living normal knee the lateral femoral condyle rolls posteriorly more than the medial side to the extent that in deep flexion the lateral femoral condyle sublux from the tibial surface (Nakagawa et al). The purpose of this presentation is to study the tibiofemoral movement in patients who had full flexion after total knee replacements and to compare it with that of normal knee.

23 knees were scanned using SIEMENS SIREMOBILE Iso-C with 3D Extension C-arm. The system is able reconstruct 3D images that can be viewed from deferent angle and precise measurements of distances between the deferent components of the implant can be made. The knee was scanned while the patient is sitting in kneeling position with the calf touching the thigh (flexion of over 150degree

All the cases studied showed a variable roll back between the medial and lateral femoral condyle. In all cases the lateral roll back was much more than the medial. In 14 cases we confirmed lateral condyle subluxation similar to what is seen in normal knee. The position of the foot (internal or external rotation) during scanning did not affect the lateral femoral condyle role back.

Although previous studies have shown paradoxical types of tibiofemoral movement in patients who have total knee replacements throughout the range of movement, the knees in patients who had full flexion after TKA tend to have the same tibiofemoral movement as the normal knee in deep flexion. The lateral femoral condyles spin off or subluxation could adversely affect the implant components especially if the design does not accommodate this movement. The lateral femoral condyle may sublux from the tibia during kneeling inpatients who had full flexion after TKA. These findings should call for changes in the implant design to accommodate the lateral condyle roll back.


Orthopaedic Proceedings
Vol. 88-B, Issue SUPP_I | Pages 28 - 28
1 Mar 2006
Tarabichi S Saleh A Larsen S
Full Access

Introduction: In living normal knee the lateral femoral condyle rolls posteriorly more than the medial side to the extent that in deep flexion the lateral femoral condyle sublux from the tibial surface(Nakagawa et al). The purpose of this presentation is to study the tibiofemoral movement in patients who had full flexion after total knee replacements and to compare it with that of normal knee.

Materials and Methods: 23 knees were scanned using SIEMENS SIREMOBILE Iso-C with 3D Extension C-arm. The system is able reconstruct 3D images that can be viewed from deferent angle and precise measurements of distances between the deferent components of the implant can be made. The knee was scanned while the patient is sitting in kneeling position with the calf touching the thigh (flexion of over 150degree).

Results: All the cases studied showed a variable roll back between the medial and lateral femoral condyle. In all cases the lateral roll back was much more than the medial. In 14 cases we confirmed lateral condyle subluxation similar to what is seen in normal knee. The position of the foot (internal or external rotation) during scanning did not affect the lateral femoral condyle role back.

Discussion: Although previous studies have shown paradoxical types of tibiofemoral movement in patients who have total knee replacements throughout the range of movement, the knees in patients who had full flexion after TKA tend to have the same tibiofemoral movement as the normal knee in deep flexion. The lateral femoral condyles spin off or subluxation could adversely affect the implant components especially if the design does not accommodate this movement.

Conclusion: The lateral femoral condyle may sublux from the tibia during kneeling in patients who have full flexion after TKA. These findings should call for changes in the implant design to accommodate the lateral condyle roll back.


Orthopaedic Proceedings
Vol. 87-B, Issue SUPP_III | Pages 351 - 351
1 Sep 2005
McCalden R MacDonald S Rorabeck C Bourne R Chess D Saleh A
Full Access

Introduction and Aims: While highly cross-linked polyethylene has achieved widespread clinical use based on laboratory testing showing significant wear reduction, there is little clinical information demonstrating its benefits in vivo. This study reports the early clinical and wear performance of a prospective randomised controlled trial comparing highly cross-linked to standard polyethylene.

Method: One hundred patients were enrolled in a prospective randomised controlled trial in which all patients received a hybrid THR (cemented Versys stem, Triology cementless acetabulum). The two groups were virtually identical in terms of age, weight, male/female ratio and received identical hip implants, except that one half (50 patients) randomly received a highly cross-linked polyethylene liner. Clinical outcomes were determined using Harris hip, WOMAC and SF-12 scores. Two-dimensional (2D) and three-dimensional (3D) wear rates were determined using a validated radiographic technique based on AP and lateral radiographs at six weeks and one, two and three years post-operatively.

Results: At two years minimum follow-up (range two to four years), there were no differences in Harris hip, WOMAC or SF-12 scores. No patients were lost to follow-up, although five patients had died of unrelated causes. There were no infections, dislocations or revisions to date. Wear analysis at one-year post-op showed high penetration rates for both groups (mean 3D wear approximately 0.25 mm/year) consistent with the bedding-in phenomena. At most recent radiographic follow-up (two or three years), there was a statistically significant although modest difference in wear rates between the two groups with a 2D and 3D wear rate of 0.14±0.10 mm/yr and 0.15±0.02 mm/yr respectively for conventional polyethylene compared to 0.09±0.04 mm/yr and 0.11±0.02 mm/yr for cross-linked polyethylene. This represented a 32 and 29 percent reduction in 2D and 3D wear rates respectively with cross-linked polyethylene.

Conclusion: At early follow-up, there were no clinical differences. There was a modest wear reduction (approximately 30%) with highly cross-linked polyethylene, considerably less than expected based on laboratory testing. Longer follow-up, after the bedding-in process is completed, is required to demonstrate the wear reduction afforded by highly cross-linked polyethylene.