The musculoskeletal (MSK) profiles of water polo players and other overhead athletes has been shown to relate to injury and throwing performance (TP). There have been no robust studies conducted on the MSK profiles and the variables affecting TP amongst female, adolescent, elite water polo players. A prospective quantitative cohort design was conducted amongst eighty-three female adolescent, elite water polo players (range 14–19 years). All participants filled out the Kerlan-Jobe Orthopaedic Clinic questionnaire, followed by a battery of screening tests aimed to identify possible MSK factors affecting TP. Pain provocation tests, range of motion (ROM), upward scapula rotation (USR), strength and pectoralis minor length measurements were all included. Participants also performed throwing speed (TS) and throwing accuracy (TA) tests. All the data collected were grouped together and analysed using SPSS 28.0. The condition for statistical significance was set as p <0.05. Multi-collinearity was tested for among variables to find out inter-variable correlations. Finally, a multiple regression analysis was performed. The mean KJOC score was 82.55 ± 14.96. 26.5% tested positive for at least one of the impingement tests. The MSK profile revealed decreased internal rotation ROM, increased external rotation ROM, a downwardly rotated scapula, weak external rotators, weak serratus anterior strength, strong lower trapezius and gluteus medius strength and a shorter pectoralis minor length all on the dominant side. Age, pectoralis minor length, upper trapezius and serratus anterior strength as well as upward scapula rotation were all positively correlated with TS, while sitting height, upper trapezius and serratus anterior strength and glenohumeral internal rotation ROM were positively correlated with TA. Multiple MSK parameters were found to be related to TS and TA in elite, adolescent water polo players.
The Latarjet procedure is a well described method to stabilize anterior shoulder instability. There are concerns of high complication rates, one of these being a painful shoulder without instability due to screw irritation. The arthroscopic changes in the shoulder at time of screw removal compared to those pre-Latarjet have not been described in the literature. We conducted a retrospective review of arthroscopic videos between 2015 and 2022 of 17 patients at the time of their Latarjet screw removal and where available (n=13) compared them to arthroscopic findings at time of index Latarjet. Instability was an exclusion criterion. X-rays prior to screw removal were assessed independently by two observers blinded to patient details for lysis of the graft. Arthroscopic assessment of the anatomy and pathological changes were made by two shoulder surgeons via mutual consensus. An intraclass correlation coefficient (ICC) was analyzed as a measure for the inter-observer reliability for the radiographs. Our cohort had an average age of 21.5±7.7 years and an average period of 16.2±13.1 months between pre- and post-arthroscopy. At screw removal all patients had an inflamed subscapularis muscle with 88% associated musculotendinous tears and 59% had a pathological posterior labrum. Worsening in the condition of subscapularis muscle (93%), humeral (31%) and glenoid (31%) cartilage was found when compared to pre-Latarjet arthroscopes. Three failures of capsular repair were seen, two of these when only one anchor was used. X-ray review demonstrated 79% of patients had graft lysis. Excellent inter-rater reliability was observed with an ICC value of 0.82. Our results show a high rate of pathological change in the subscapularis muscle, glenoid labrum and articular cartilage in the stable but painful Latarjet. 79% of patients had graft lysis with prominent screws on X-ray.
Orthopaedic training in Southern Africa is largely focused on trauma, although elective procedures, such as knee arthroscopy are increasing. This is especially true in the private sector where most trainees will practice. The primary aim of this study was to assess the arthroscopic competency of orthopaedic trainees in a setting of limited resources. A prospective observational cohort study was carried out. Orthopaedic trainees of a Southern African university hospital performed basic arthroscopy on a knee model. Their surgical competency was assessed by two surgeons proficient in arthroscopy using the modified Basic Knee Arthroscopy Skill Scoring System (mBAKSSS).Abstract
Background
Methods
Total Shoulder Arthroplasty (TSA) is a solution to fixing shoulder complications and restoring normal shoulder functionality. Shoulder arthritis is one of the common indicators of TSA. Studies suggest that 15% and 7% of the total Rheumatoid Arthritis (RA) and Osteoarthritis (OA) patients respectively, in sub-Saharan Africa, have degenerated shoulders. These patients are implanted with a Total Shoulder Prosthesis (TSP). There are limited literature available on the morphometric features of African shoulders. Previous studies have indicated that differences in shoulder surface geometry of the European and African populations, exists. This study aims at identifying the structural differences of the humeral articulating surfaces between South African and Swiss data sets. The South African data set included the Computerised Tomography (CT) scans of cadavers sourced from the University of Cape Town and the Swiss data set included the cadaver CT scans obtained from the SICAS Medical Image Repository. Sixty reconstructed models of humerus were generated from these scans of 30 (bilateral) healthy cadavers (15 South African and 15 Swiss) using Mimics®. The humeral articulating surfaces were separated from the shaft by performing in-silico surgery using SOLIDWORKS®, according to the guidelines provided orthopaedic surgeons. A Matlab code was generated to determine the superior-inferior (S-I) and the anterior-posterior (A-P) circular diameter and the peak points (PPs) of the articulating surfaces. The PPs were defined as the highest point on the articulating surface, which is most likely to be in contact with the glenoid. The S-I diameter was found to be significantly greater (p<0.01) than the A-P diameter for both the data sets (average difference = 5.02mm). Both the average A-P and S-I diameter for the Swiss data set were significantly larger (p = 0.02 and p = 0.03) than the South African data set by 2.36 mm and 2.70 mm respectively. The PPs were found to lie at an off-set from the origin. in case of the Swiss data set the average PP lie on the superior-posterior (S-P) quadrant and for the South African data set the average PP was found to lie on the anterior-inferior (A-I) quadrant. The A-P variation on the position of PP was highly significant (p = 0.003). The results obtained in this study sheds light on the observed morphological variations between the South African and Swiss data sets. The observed circular diameter values are similar to the literature. The observed results suggest that the average TSP needed for the Swiss data set would have been larger than the ones needed for the South African data set. PP is a novel feature which has not been studied extensively. The fact that the average Swiss data set PP lie in the S-P quadrant might suggest that these humeral heads are more retroverted and superiorly tilted when compared to the South African data set. These morphometric variations can play a major role in post-TSA kinematics. The future scope of this study is to highlight other morphometric variations, if any, for the gleno-humeral articulating surfaces.
The morphology of the proximal part of the humerus varies largely. Morphometric features characterizing the three-dimensional geometry of the proximal humerus have revealed a wide difference within individuals. These parameters include head size, radius of curvature, inclination angle, retroversion angle, offsets and neck-shaft angle. Different implant designs have been adapted so as to make provision for these anatomical variations. However, the optimal design criteria are yet to be established. Implant design is one of the main factors determining the success of Total Shoulder Arthroplasty (TSA) since slight modifications in the implant anatomy could have significant biomechanical effects. Therefore, this study investigates the three-dimensional morphometric parameters of the South African proximal humerus which will serve as a basis for designing a new Total Shoulder Prosthesis for the South African population. Sixteen South African (SA) fresh cadaveric humeri (8 left, 8 right; 8 paired) were used in this study. The data consisted of 6 men and 2 women with ages ranging from 32 to 55 years (43.13 ±8.51). The humeri were scanned using a Computer Tomography (CT) scanner. The Digital Imaging and Communications in Medicine (DICOM) files from the CT data were imported into medical modelling software, MIMICS for reconstruction. The 3D reconstructed model of the humeri as an STL file was used for further processing. The STL data were generated as a cloud of points in a CAD software, SolidWorks. These were then remodeled by defining the detailed Referential Geometric Entities (RGEs) describing the anatomical characteristics. Anatomical reference points were defined for the anatomical neck plane, the epiphyseal sphere and the metaphyseal cylinder. Also, axes were defined which comprises of the humeral head axis and the metaphyseal axis. Thereafter, the posterior offsets medial offsets and the inclination angles were measured based on the RGEs. The posterior offset varied from 0.07 mm to 2.87 mm (mean 1.20 mm), the medial offset varied from 4.40 mm to 8.45 mm (mean 6.50 mm) while the inclination angle varied from 114.00º to 133.87º (mean 121.05º) The outcome of the study showed that the shape and dimensions of the proximal humerus varies distinctively. The articular surface is not a perfect sphere and differs independently with respect to the inclination angles. In addition, variations were noticeable in the medial and lateral offsets. The morphometric data on the African shoulder is very limited and this study will significantly contribute to the shoulder data repository for the SA population. The morphometric parameters measured in this study will be useful in designing a South African shoulder prosthesis that mimics the native shoulder hence eliminating post-surgical complications.
The aim of this study was to investigate the
relationship between the geometry of the proximal femur and the incidence
of intra-operative fracture during uncemented total hip arthroplasty
(THA). We studied the pre-operative CT scans of 100 patients undergoing
THA with an uncemented femoral component. We measured the anteroposterior
and mediolateral dimensions at the level of division of the femoral
neck to calculate the aspect ratio of the femur. Wide variations
in the shape of the femur were observed, from round, to very narrow
elliptic. The femurs of women were narrower than those of men (p
<
0.0001) and small femurs were also narrower than large ones.
Patients with an intra-operative fracture of the calcar had smaller
and narrower femurs than those without a fracture (p <
0.05)
and the implanted Corail stems were smaller in those with a fracture
(mean size 9 The variability of the shape of the femoral neck at the level
of division contributes to the understanding of the causation of
intra-operative fractures in uncemented THA. Cite this article:
The treatment goals in diaphyseal radius fractures are to regain and maintain length and rotational stability. Open reduction and plating remains the gold standard but carries the inherent problems of soft tissue disruption and periosteal stripping. Intramedullary nailing offers advantages of minimally invasive surgery and minimal soft tissue trauma. The purpose of this study is to describe the results of locked intramedullary nailing for adult gunshot diaphyseal radius fractures. A retrospective review of clinical and radiological records was performed on patients with intramedullary nailing of isolated gunshot radius fractures between 2009 and 2013.Purpose of study:
Methods:
Injuries inflicted by gunshot wounds (GSW) are an immense financial burden on the South African healthcare system. The cost of treating an abdominal GSW has previously been estimated at R30 000 per patient. No study has been conducted to estimate the financial burden from an orthopaedic perspective. To estimate the average cost of treating GSW victims requiring orthopedic interventions in a South African tertiary level hospital.Background:
Objective:
To investigate the incidence of post-operative ulna nerve symptoms in total elbow arthroplasty after full in-situ release. A retrospective review was completed of the medical records of eighty-three consecutive primary total elbow arthroplasties (TEA) performed between 2003 and 2012. Data analysed included the presence of pre-operative ulnar nerve (UN) symptoms, history of prior UN transposition, intra-operative management of the UN and presence of post-operative symptoms.Aim:
Methods:
To measure compliance with the Trauma Unit guideline relating to the early application of the Thomas splint in patients with a femur shaft fracture on clinical examination. Retrospective review of clinical and radiological records of patients presenting from 01 January 2012 to 31 December 2012 at a Level 1 Trauma Unit.Objectives:
Design:
To investigate the clinical outcomes of elbows with post-traumatic stiffness treated by open surgical release. A retrospective review was completed on thirty-five consecutively managed patients who underwent an open elbow release for post-traumatic stiffness between 2007 and 2012. Pre-operative and post-operative range of motion (ROM), pain scores and functional outcomes were recorded.Aim:
Methods:
The presence of an L5 transverse process fracture is reported in many texts to be a marker of pelvis fracture instability. There is paucity of literature to support this view. Available studies have been performed on patients who were already known to have a pelvis fracture. No study has attempted to document the presence of this lesion in the absence of a pelvis fracture. Primary aim: To identify the correlation between the presence of a L5 transverse process fracture and an unstable pelvic ring injury. Secondary aim: To establish whether a L5 transverse process fracture can occur in the absence of a pelvis fracture. We conducted a retrospective review of all CT scans performed in patients who presented to a Level 1 Trauma Unit for blunt abdomino-pelvic trauma between January 1, 2012 and August 28, 2013. A total of 203 patients met our inclusion criteria.Purpose of study:
Methods:
Computerised Tomographic Angiography (CTA) is less invasive than conventional angiography. It is our perception that CTAs are being requested and performed too frequently at our institution without correct indications. We assessed the number of CTAs that were done, the percentage of vascular injuries sustained and whether correct indications were followed when requesting CTAs. A review of records of the radiology department to determine the number of CTAs done for suspected extremity vascular injuries from January to December 2012. Inclusion criteria were CTAs performed during this period for suspected vascular injuries in fractures and dislocations and extremity gunshot wounds. A retrospective chart review was performed to determine the mechanism of injury, clinical picture (pulses, temperature, capillary refill and neurology), indications for and results of the CTA.Purpose of study
Methodology
Hypoplasia of the glenoid is a rare condition caused by incomplete ossification of the postero-inferior aspect of the developing glenoid. It may be isolated or associated with a more generalised condition. The clinical symptomatology is variable depending on the age at time of presentation. We performed a retrospective chart review of patients who presented with shoulder complaints, and in whom a radiographic diagnosis of glenoid hypoplasia had been made. From January 2002 to December 2012, 8 patients (9 shoulders) with radiological signs of glenoid hypoplasia were identified. The mean age at presentation was 39 years (range 23 to 77) and the mean symptom duration was 12.5 months (range 1 to 48).Introduction
Materials and Methods
To compare radiological and clinical outcomes between triceps-detaching and triceps-sparing approaches in total elbow arthroplasty, with specific focus on cementing technique and post-operative range of motion. A retrospective review was completed of medical records and radiographs of 56 consecutively managed patients who underwent a primary total elbow arthroplasty between 2000 and 2012 at a tertiary hospital. Rheumatoid Arthritis was the predominant pathology (47/56). Data analysed included patient demographics, range of motion pre-operatively and at various stages post-operatively, approach utilized, operative time and complications. Cementing technique was graded as adequate, marginal or inadequate according to Morrey's criteria.Aim
Methods
Internal rotation (IR) contracture of the shoulder is a frequent complication of obstetric brachial plexus injury, even in the face of full neurological recovery. Surgical procedures to treat this complication include tendon transfers, capsular release and osteotomies. We compared the outcomes in patients who had arthroscopic release only and those who also underwent a tendon transfer. We retrospectively reviewed the clinical records of all patients with OBPI presenting to our unit in the years 2002–2012 who underwent surgical procedures for the treatment of an IR contracture of the shoulder. Increase in range of external rotation (ER) in adduction and abduction intra-operatively was recorded. At follow-up, active ER, the Mallet score, presence of an ER contracture and the “drop-arm” sign was recorded.Purpose of study
Methods
Rotator cuff tears are among the most common and debilitating
upper extremity injuries. Chronic cuff tears result in atrophy and
an infiltration of fat into the muscle, a condition commonly referred
to as ‘fatty degeneration’. While stem cell therapies hold promise
for the treatment of cuff tears, a suitable immunodeficient animal
model that could be used to study human or other xenograft-based
therapies for the treatment of rotator cuff injuries had not previously
been identified. A full-thickness, massive supraspinatus and infraspinatus tear
was induced in adult T-cell deficient rats. We hypothesised that,
compared with controls, 28 days after inducing a tear we would observe
a decrease in muscle force production, an accumulation of type IIB
fibres, and an upregulation in the expression of genes involved
with muscle atrophy, fibrosis and inflammation.Objectives
Methods
Dislocation is one of the most common orthopaedic complications after primary total hip replacement (THR). The reported dislocation rate in elective THR is 5–8%. This number increases up to 22% for THR done for neck of femur fractures. Due to the reported increase in dislocation for trauma, some surgeons prefer to do a hemi-arthroplasty or open reduction and internal fixation (ORIF). Hemi-arthroplasty is known to have poorer functional outcomes. Failure of ORIF is as high as 43%, and revision of failed ORIF to THR has reported dislocation rates of up to 42%. A retrospective review of all THR done for neck of femur fractures during 2006–2011 was undertaken. The patients in our institution who are considered for a THR must have an active life-style. Records were reviewed for delay to surgery, surgical approaches, articulations, bearing surfaces, follow up periods and cemented versus uncemented implants. We excluded all pathological fractures, extra-capsular fractures, failed ORIF, patients with incomplete data and patients with a follow-up period less than 3 months. Hip dislocation was the end-point of the review and we did not study other causes of revision e.g. loosening of components or infection.Introduction
Materials and methods
We aim to determine the amputation rate and identify predictors of outcome in patients with tibial fractures and associated popliteal artery injuries at a level 1 trauma unit draining a large geographical region. All patients with popliteal artery injuries and tibial fractures treated at a level 1 trauma unit between 1999 and 2010 were assessed retrospectively regarding amputation rates and prognostic factors and tested for significance with a Z-test of proportions.Purpose
Material and methods
Resurfacing of the glenohumeral joint has gained popularity since its first introduction in 1958. Advantages of resurfacing over conventional shoulder arthroplasty include preservation of humeral bone stock, closer replication of individual anatomy, reduction of periprosthetic fracture risk, non-violation of medullary canal, and ease of revision to a stemmed component if needed. We reviewed a group of patients with arthrosis of the glenohumeral joint who underwent humeral resurfacing, and who were at a minimum of two years post surgery. From January 2000 to March 2011, 51 humeral resurfacing procedures were performed in 49 patients. Patients were contacted for review, and assessed using patient reported outcome measures. An Oxford Shoulder score as well as a subjective satisfaction and outcome questionnaire was completed, as well as details regarding further surgery or revision. 2 patients had died, 11 patients were not contactable, and in 4 the medical files had been lost. In the remaining 32 shoulders, the average follow-up was 5.9 years. The mean age at time of surgery was 62.3 years (range 36 to 84).Introduction
Materials and Methods
