While clinically important improvements in Oxford Shoulder Scores have been defined for patients with general shoulder problems or those undergoing subacromial decompression, no threshold has been reported for classifying improvement after shoulder replacement surgery. This study aimed to establish the minimal clinically important change (MCIC) for the Oxford Shoulder Score in patients undergoing primary total shoulder replacement (TSR).

Patient-reported outcomes data were sourced from the Australian Orthopaedic Association National Joint Replacement Registry Patient-Reported Outcome Measures Program. These included pre- and 6-month post-operative Oxford Shoulder Scores and a rating of patient-perceived change after surgery (5-point scale ranging from ‘much worse’ to ‘much better’). Two anchor-based methods (using patient-perceived improvement as the anchor) were used to calculate the MCIC: 1) mean change method; and 2) predictive modelling, with and without adjustment for the proportion of improved patients.

The analysis included 612 patients undergoing primary TSR who provided pre- and post-operative data (58% female; mean (SD) age 70 (8) years). Most patients (93%) reported improvement after surgery. The MCIC derived from the mean change method was 6.8 points (95%CI 4.7 to 8.9). Predictive modelling produced an MCIC estimate of 11.6 points (95%CI 8.9 to 15.6), which reduced to 8.7 points (95%CI 6.0 to 12.7) after adjustment for the proportion of improved patients.

For patient-reported outcome measures to provide valuable information that can support clinical care, we need to understand the magnitude of change that matters to patients. Using contemporary psychometric methods, this analysis has generated MCIC estimates for the Oxford Shoulder Score. These estimates can be used by clinicians and researchers to interpret important changes in pain and function after TSR from the patient's perspective. We conclude that an increase in Oxford Shoulder Scores of at least 9 points can be considered a meaningful improvement in shoulder-related pain and function after TSR.

Glenoid bone grafting in reverse total shoulder arthroplasty (RTSA) has emerged as an effective method of restoring bone stock in the presence of complex glenoid bone loss, yet there is limited published evidence on efficacy. The aim of this study was to conduct an analysis of clinical and radiographic outcomes associated with glenoid bone grafting in primary RTSA.

Patients who underwent a primary RTSA with glenoid bone grafting were retrospectively identified from the databases of two senior shoulder surgeons. Inclusion criteria included minimum of 12 months clinical and/or radiographical follow up. Patients underwent preoperative clinical and radiographic assessment. Graft characteristics (source, type, preparation), range of movement (ROM), patient-reported outcome measures (Oxford Shoulder Scores [OSS]), and complications were recorded. Radiographic imaging was used to analyse implant stability, graft incorporation, and notching by two independent reviewers.

Between 2013 and 2021, a total of 53 primary RTSA procedures (48 patients) with glenoid bone grafting were identified. Humeral head autograft was used in 51 (96%) of cases. Femoral head allograft was utilised in two cases. Depending on the morphology of glenoid bone loss, a combination of structural (corticocancellous) and non-structural (cancellous) grafts were used to restore glenoid bone stock and the joint line. All grafts were incorporated at review. The mean post-operative OSS was significantly higher than the pre-operative OSS (40 vs. 22, p < 0.001). ROM was significantly improved post-operatively. One patient is being investigated for residual activity-related shoulder pain. This patient also experienced scapular notching resulting in the fracturing of the inferior screw. One patient experienced recurrent dislocations but was not revised.

Overall, at short term follow up, glenoid bone grafting was effective in addressing glenoid bone loss with excellent functional and clinical outcomes when used for complex bone loss in primary RTSA. The graft incorporation rate was high, with an associated low complication rate.

The aim of this study was to examine the incidence of obesity in patients undergoing primary total shoulder replacement (TSR) (stemmed and reverse) for osteoarthritis (OA) in Australia compared to the incidence of obesity in the general population.

A 2017-18 cohort of 2,621 patients from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) who underwent TSR, were compared with matched controls from the Australian Bureau of Statistics (ABS) National Health Survey from the same period. The two groups were analysed according to BMI category, sex and age.

According to the 2017-18 National Health Survey, 35.6% of Australian adults are overweight and 31.3% are obese. Of the primary TSR cases performed, 34.2% were overweight and 28.6% were obese. The relative risk of requiring TSR for OA increased with increasing BMI category. Class-3 obese females, aged 55-64, were 8.9 times more likely to require TSR compared to normal weight counterparts. Males in the same age and BMI category were 2.5 times more likely. Class-3 obese patients underwent TSR 4 years (female) and 7 years (male) sooner than their normal weight counterparts.

Our findings suggest that the obese population is at risk for early and more frequent TSR for OA. Previous studies demonstrate that obese patients undergoing TSR also exhibit increased risks of longer operative times, higher superficial infection rates, higher periprosthetic fracture rates, significantly reduced post-operative forward flexion range and greater revision rates.

Obesity significantly increases the risk of requiring TSR. To our knowledge this is the first study to publish data pertaining to age and BMI stratification of TSR Societal efforts are vital to diminish the prevalence and burden of obesity related TSR.

There may well be reversible pathophysiology in the obese population to address prior to surgery (adipokines, leptin, NMDA receptor upregulation). Surgery occurs due to recalcitrant or increased pain despite non-op Mx.

The 2021 Australian Orthopaedic Association National Joint Replacement Registry report indicated that total shoulder replacement using both mid head (TMH) length humeral components and reverse arthroplasty (RTSA) had a lower revision rate than stemmed humeral components in anatomical total shoulder arthroplasty (aTSA) - for all prosthesis types and diagnoses. The aim of this study was to assess the impact of component variables in the various primary total arthroplasty alternatives for osteoarthritis in the shoulder.

Data from a large national arthroplasty registry were analysed for the period April 2004 to December 2020. The study population included all primary aTSA, RTSA, and TMH shoulder arthroplasty procedures undertaken for osteoarthritis (OA) using either cross-linked polyethylene (XLPE) or non-cross-linked polyethylene (non XLPE). Due to the previously documented and reported higher revision rate compared to other anatomical total shoulder replacement options, those using a cementless metal backed glenoid components were excluded. The rate of revision was determined by Kaplan-Meir estimates, with comparisons by Cox proportional hazard models. Reasons for revision were also assessed.

For a primary diagnosis of OA, aTSA with a cemented XLPE glenoid component had the lowest revision rate with a 12-year cumulative revision rate of 4.7%, compared to aTSA with cemented non-XLPE glenoid component of 8.7%, and RTSA of 6.8%. The revision rate for TMH was lower than aTSA with cemented non-XLPE, but was similar to the other implants at the same length of follow-up. The reason for revision for cemented aTSR was most commonly component loosening, not rotator cuff deficiency.

Long stem humeral components matched with XLPE in aTSA achieve a lower revision rate compared to shorter stems, long stems with conventional polyethylene, and RTSA when used to treat shoulder OA. In all these cohorts, loosening, not rotator cuff failure was the most common diagnosis for revision.

Osteoarthritis (OA) is a disease of the synovial joint with synovial inflammation, capsular contracture, articular cartilage degradation, subchondral sclerosis and osteophyte formation contributing to pain and disability. Transcriptomic datasets have identified genetic loci in hip and knee OA demonstrating joint specificity. A limited number of studies have directly investigated transcriptional changes in shoulder OA. Further, gene expression patterns of periarticular tissues in OA have not been thoroughly investigated. This prospective case control series details transcriptomic expression of shoulder OA by analysing periarticular tissues in patients undergoing shoulder replacement for OA as correlated with a validated patient reported outcome measure of shoulder function, an increasing (clinically worsening) QuickDASH score. We then compared transcriptomic expression profiles in capsular tissue biopsies from the OA group (N=6) as compared to patients undergoing shoulder stabilisation for recurrent instability (the control group, N=26). Results indicated that top ranked genes associated with increasing QuickDASH score across all tissues involved inflammation and response to stress, namely interleukins, chemokines, complement components, nuclear response factors and immediate early response genes. Some of these genes were upregulated, and some downregulated, suggestive of a state of flux between inflammatory and anti-inflammatory signalling pathways. We have also described gene expression pathways in shoulder OA not previously identified in hip and knee OA, as well as novel genes involved in shoulder OA.

In Australia nearly two-thirds of arthroplasty procedures are performed in the private setting, which is disproportionate to the dimensioning 43.5% of the population with private health cover. The rapid growth of shoulder arthroplasty surgery will be absorbed by both private and public sectors. This study aimed to assess the influence of healthcare setting on elective shoulder arthroplasty outcomes, defined by revision rate, and functional measures.

Data was collected on all primary procedures performed from 2004 – 2019 within a regional area of Victoria, Australia. Patients were categorised into private or public settings. Trauma cases for acute proximal humerus fractures were excluded. The primary outcome of revision surgery was recorded as a cumulative percentage, and survival analysis conducted to calculate a hazard ratio (HR). Functional outcomes were measured through range-of-motion (ROM) and multiple validated patient-reported-outcome-measures (PROMs).

458 patients were identified in the study: 290 private and 168 public. There was no difference in the revision rate (3.8% private, 4.8% public), with an adjusted HR of 1.25 (p=0.66) for public compared to private. Baseline and post-operative functional measures were significantly greater in the private setting for ROMs and PROMs analysis, in particular post-operative QuickDASH (15.9±14.7 to 32.7±23.5; p<0.001) and Oxford Shoulder Score (42.6±6.3 to 35.7±11.2; p<0.001). However, there was no significant difference for any of the functional measures in the amount of change from baseline to 12-months between settings.

Although healthcare setting does not appear to influence revision rate for shoulder arthroplasty, clear differences were demonstrated for functional measures both pre and post operatively. This may be attributed to factors such as access to perioperative rehabilitation and should be an area to target future investigations.

While clinically important improvements in Oxford Shoulder Scores have been defined for patients with general shoulder problems or those undergoing subacromial decompression, no threshold has been reported for classifying improvement after shoulder replacement surgery. This study aimed to establish the minimal clinically important change (MCIC) for the Oxford Shoulder Score in patients undergoing primary total shoulder replacement (TSR).

Patient-reported outcomes data were sourced from the Australian Orthopaedic Association National Joint Replacement Registry Patient-Reported Outcome Measures Program. These included pre- and 6-month post-operative Oxford Shoulder Scores and a rating of patient-perceived change after surgery (5-point scale ranging from ‘much worse’ to ‘much better’). Two anchor-based methods (using patient-perceived improvement as the anchor) were used to calculate the MCIC: 1) mean change method; and 2) predictive modelling, with and without adjustment for the proportion of improved patients.

The analysis included 612 patients undergoing primary TSR who provided pre- and post-operative data (58% female; mean (SD) age 70 (8) years). Most patients (93%) reported improvement after surgery. The MCIC derived from the mean change method was 6.8 points (95%CI 4.7 to 8.9). Predictive modelling produced an MCIC estimate of 11.6 points (95%CI 8.9 to 15.6), which reduced to 8.7 points (95%CI 6.0 to 12.7) after adjustment for the proportion of improved patients.

For patient-reported outcome measures to provide valuable information that can support clinical care, we need to understand the magnitude of change that matters to patients. Using contemporary psychometric methods, this analysis has generated MCIC estimates for the Oxford Shoulder Score. These estimates can be used by clinicians and researchers to interpret important changes in pain and function after TSR from the patient's perspective. We conclude that an increase in Oxford Shoulder Scores of at least 9 points can be considered a meaningful improvement in shoulder-related pain and function after TSR.

There is very limited literature describing the outcomes of management for proximal humerus fractures with more than 100% displacement of the head and shaft fragments as a separate entity. This study aimed to compare operative and non-operative management of the translated proximal humerus fracture.

A prospective cohort study was performed including patients managed at a Level 1 trauma centre between January 2010 to December 2018. Patients with 2, 3 and 4-part fractures were included based on the degree of translation of the shaft fragment (≥100%), resulting in no cortical contact between the head and shaft fragments. Outcome measures were the Oxford Shoulder Score (OSS), EQ-5D-5L, and radiological outcomes. Complications recorded included further surgery, loss of position/fixation, and non-union/malunion. Linear and logistic regression models were used to compare management options.

There were 108 patients with a proximal humerus fracture with ≥100% translation; 76 underwent operative management and 32 were managed non-operatively with sling immobilisation. The mean (SD) age in the operative group was 54.3 (±20.2) and in the non-operative group was 73.3 (±15.3) (p<0.001). There was no association between OSS and management options (mean 38.5(±9.5) operative vs mean 41.3 (±8.5) non-operative, p=0.48). Operative management was associated with improved health status outcomes; EQ-5D utility score adjusted mean difference 0.16 (95%CI 0.04-0.27, p=0.008); EQ-5D VAS adjusted mean difference 19.2 (95%CI 5.2-33.2, p=0.008). Operative management was further associated with a lower odds of non-union (adjusted OR 0.30, 95%CI 0.09-0.97, p=0.04), malunion (adjusted OR 0.14, 95%CI 0.04-0.51, p=0.003) and complications (adjusted OR 0.07, 95%CI 0.02-0.32, p=0.001).

Translated proximal humerus fractures with ≥100% displacement demonstrate improved health status and radiological outcomes following surgical fixation. Patients with this injury should be considered for operative intervention.

We compared the rate of revision of two classes of primary anatomic shoulder arthroplasty, stemmed (aTSA) and stemless (sTSA) undertaken with cemented all polyethylene glenoid components.

A large national arthroplasty registry identified two cohort groups for comparison, aTSA and sTSA between 1^st January 2011 and 31^st December 2020. A sub-analysis from 1 January 2017 captured additional patient demographics. The cumulative percentage revision (CPR) was determined using Kaplan-Meier estimates of survivorship and hazard ratios (HR) from Cox proportional hazard models adjusted for age and gender.

Of the 7,533 aTSA procedures, the CPR at 8 years was 5.3% and for 2,567 sTSA procedures was 4.0%. There was no difference in the risk of revision between study groups (p=0.128).

There was an increased risk of revision for aTSA and sTSA undertaken with humeral head sizes <44mm (p=0.006 and p=0.002 respectively). Low mean surgeon volume (MSV) (<10 cases per annum) was a revision risk for aTSA (p=0.033) but not sTSA (p=0.926).

For primary diagnosis osteoarthritis since 2017, low MSV was associated with an increased revision risk for aTSA vs sTSA in the first year (p=0.048). Conversely, low MSV was associated with a decreased revision risk for sTSA in the first 6 months (p<0.001). Predominantly aTSA was revised for loosening (28.8%) and sTSA for instability/dislocation (40.6%).

Revision risk of aTSA and sTSA was associated with humeral head size and mean surgeon volume but not patient characteristics. Inexperienced shoulder arthroplasty surgeons experience lower early revision rates with sTSA in the setting of osteoarthritis. Revision of aTSA and sTSA occurred for differing reasons.

Proximal humerus fractures (PHF) are common, accounting for approximately 5% of all fractures. Approximately 30% require surgical intervention which can range from open reduction with internal fixation (ORIF) to shoulder arthroplasty (including hemiarthroplasty, total shoulder arthroplasty, (TSA) or reverse total shoulder arthroplasty (RTSA)). The aim of this study was to assess trends in operative interventions for PHF in an Australian population.

Data was retrospectively collected for patients diagnosed with a PHF and requiring surgical intervention between January 2001 and December 2020. Data for patients undergoing ORIF were extracted from the Medicare database, while data for patients receiving arthroplasty for PHF were obtained from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR).

Across the study period, ORIF was the most common surgical procedure for management of PHFs. However, since 2019, RTSA has surpassed ORIF as the most common surgical procedure to treat PHFs, accounting for 51% of operations. While the number of RTSA procedures for PHF has increased, ORIF and shoulder hemiarthroplasty has significantly reduced since 2007 (p < 0.001). TSA has remained uncommon across the follow-up period, accounting for less than 1% of all operations. Patients younger than 65 years were more likely to receive ORIF, while those aged 65 years or greater were more likely to receive hemiarthroplasty or RTSA.

While the number of ORIF procedures has increased during the period of interest, it has diminished as a proportion of overall procedure volume. RTSA is becoming increasingly popular, with decreasing utilization of hemiarthroplasty, and TSA for fracture remaining uncommon. These trends provide information that can be used to guide resource allocation and health provision in the future. A comparison to similar data from other nations would be useful.

Physician health is a global concern, with increasing research efforts directed towards the challenge. Australia has limited published specialty-specific well-being data for trainees and consultants in medicine and surgery. We measured distress in Australian Orthopaedic trainees using the Physician Well-Being Index (PWBI, MedEd Web Solutions) using an online anonymous survey sent by the Australian Orthopaedic Association.

The survey response rate was 38% (88/230). Forty-four percent of survey respondents met criteria for distress. Self-reported burnout in the 30 days prior was reported by 63% of respondents. Fifty-eight percent of females and 41% of males met criteria for distress. Of the 19% or respondents identifying as an ethnic minority, 53% were distressed compared to 42% of those identifying as non-ethnic minority. Trainees without a mentor had a 50% distress rate compared to those with a mentor (37% distress rate). Twenty-five percent of all trainees wished they had picked a career outside of medicine and 16% wished they had pursued a medical career other than Orthopaedic Surgery. Of those trainees who had already passed the fellowship exam, 17% wished they had pursued a career outside of medicine and 21% wished they had pursued a medical career in an area other than Orthopaedic Surgery.

These findings suggest concerning rates of career regret and gender-related trends in distress in Australian Orthopaedic trainees. Females may be over-represented in our results as 17% of the source population was female compared to 22% of respondents. Further research is required across all Australian specialties to gain further understanding of factors contributing to distress and to assist in the development of strategy to protect against physician burnout.

Proximal humerus fracture dislocations are amongst the most severe proximal humerus injuries, presenting a challenging management problem. The aim of this study was to report on the long-term outcomes of the management of proximal humerus fracture dislocations.

Patients with a proximal humerus fracture dislocation managed at a Level 1 trauma centre from January 2010 to December 2018 were included. Patients with an isolated tuberosity fracture dislocation or a pathological fracture were excluded. Outcome measures were the Oxford Shoulder Score (OSS), EQ-5D-5L, return to work, and radiological outcomes. Complications recorded included further surgery, loss of position/fixation, non-union/malunion, and avascular necrosis.

A total of 69 patients were included with a proximal humerus fracture dislocation in the study period; 48 underwent surgical management and 21 were managed with closed reduction alone. The mean (SD) age of the cohort was 59.7 (±20.4), and 54% were male. Overall patients reported a mean OSS of 39.8 (±10.3), a mean EQ-5D utility score of 0.73 (±0.20), and 78% were able to return to work at a median of 1.2 months. There was a high prevalence of complications in both patients managed operatively or with closed reduction (25% and 38% respectively). In patients undergoing surgical management, 21% required subsequent surgery.

Patient reported outcome measures post proximal humerus fracture dislocations do not return to normal population levels. These injuries are associated with a high prevalence of complications regardless of management. Appropriate patient counselling should be undertaken before embarking on definitive management.

Abstract

Abstract

Introduction

Post-arthroscopic glenohumeral chondrolysis (PAGCL) is a rare, but significant, complication of arthroscopic shoulder surgery that may lead to arthroplasty. Exact causal factors and pathways associated with the development of PAGCL are unknown however a number of patient factors and surgical factors have been implicated. Suture is one of these potential causal factors and currently little is known about the body's immune response to commonly used orthopaedic sutures. The aim of this project is to examine the biological response to 3 commonly used orthopaedic sutures (Ethibond, Fibrewire, and Orthocord) in a murine airpouch model. It was hypothesised that different sutures would elicit a different histological response and that suture wear-debris would induce an increased inflammatory reaction compared to intact suture.

Aims

To report the rate of early revision (within two years) after shoulder arthroplasty and identify any patient, disease or prosthesis factors that may be associated with these early failures.

Distal radial volar locking plating systems (DRVLP) are increasingly used for complex fractures of the distal radius. There have been limited studies on volar locking plating systems focusing on functional outcome and complications data. The aim of this study is to assess whether the surgeon can predict which fractures will have a good or poor outcome in terms of clinical, radiological and functional outcome assessment.

Patients who sustained a distal radial fracture managed with a radial volar locking plate were identified from hospital audit data systems. Data was collected on all patients from patient notes including radiographs performed pre- and post-operatively and functional scores using the Patient Rated Wrist Evaluation score (PRWE). The study was approved by the Barwon Health Research and Ethics Advisory Committee.

In total, there were 153 patients (105 female, 48 male) from all 11 surgeons in the unit. Patients ranged in age from 17 to 91 years, average age of 53.7 years at time of injury (IQR 41-70yr). A quarter had concomitant other injuries, and 60% had type C1-C3 fractures. Most of the patients (n = 147) had the AO Synthes DRVLP, six patients had other volar locking plate systems. Twenty-seven percent of patients (n = 42) had exogenous bone graft insertion for more unstable fracture patterns. The major complication rate was 12% (18/153) with 17 cases requiring further surgery. Post-operative radiographs demonstrated no increase in ulnar variance (median 0.0mm IQR 2.0 to1.0 mm) but an increase in radial inclination by 5 deg (IQR 0-12 deg), radial length by 3.5 mm (IQR 1.0-6.3 mm) and radial tilt by 17 deg (IQR 3-32 deg) (volar angulation) compared to pre-operative radiographs, which was statistically significant (all p<0.001). Ninety percent of patients returned a PRWE form with an average follow-up of 1.16 years (IQR 0.46-2.16yr). Median score for those aged less than 50 years was 14.00 (IQR 6.00-41.50) and did not differ from those greater than 50 years (median 16.00 IQR 4.50-36.00) (p = 1.00). PRWE score across groups categorised by classification of fracture showed large variance within each category and were not significantly different: Class A median 8.00 (IQR 3.50-26.25), Class B 13.00 (IQR 6.75-34.00) and Class C 17 (IQR 5.00-38.50) (p = 0.65).

The majority of patients were female and had a type C fracture. Post-operative x-rays displayed an increase in radial inclination, length and tilt, and restoration of radial antatomy. PRWE scores were not different across age groups or classification of the fracture. This demonstrates that predictable outcomes can be achieved with volar locking plates despite fracture complexity if attention is paid to anatomical restoration of the radius, and in more unstable patterns with void support using injectable graft. Quadratus can act as an effective barrier to prominent hardware and superficial infection. Supination range may be reduced by this approach due to a tight repair, though a palmar DRUJ capsule contracture may also be an explanation.

Introduction: Distal radial volar locking plating systems (DRVLP) are commonly used for complex fractures of the distal radius in all ages.

There have been few studies in the current literature that analyse the success of volar locking plating systems. Those studies with functional outcome and complications data have yet to be

The purpose of the study is assess whether the surgeon can predict which fractures will have a good versus a poor outcome in terms of clinical, radiological and functional outcome assessment.

Method: Patients who sustained a distal radial fracture managed with a radial volar locking plate were identified from hospital audit data systems, after appropriate research ethical approval.

Retrospective data was collected on all patients from patient case notes, radiographs performed pre- and postoperatively and functional data by completed patient rated wrist evaluation scores (PRWE).

Demographic, clinical, radiographic and functional data was collected and statistically analysed by a bio-statistician.

Results: 153 patients were included (116 female, 38 male). Patients were included from all 11 surgeons at the Geelong Hospital between November 2004 and February 2008.

The age range was 17 to 91 years. Average age was 53.7 years at time of injury.

24% patients had concomitant other injuries.

In terms of AO fracture classification 53% patients had type C1 – C3 fractures.

147 patients had the AO Synthes DRVLP, 6 patients had other volar locking plate systems. 27% patients had an exogenous bone graft insertion.

The major complication rate was 12% (18/153) with 94% of these cases requiring further surgery. Post operative radiographs demonstrated an average increase in ulnar variance by 1.25mm, radial inclination by 7 deg, radial length by 4mm and radial tilt by 16 deg (volar angulation) compared to pre-operative radiographs that was statistically significant. 90% patients returned a PRWE form and

Discussion: Predictive parameters for a poor functional outcome were: men, dominant hand injury, other concomitant injuries, pre operative reduced inclination and volar tilit & high ulnar variance on radiographs. Poor functional outcome correlated with poor radiological outcome

Despite various forms of operative treatment, outcomes have been variable after displaced multi-fragment proximal humeral fractures. A significant number of fixation failures and avascular necrosis of humeral head occurs (up to 77 percent). Biomechanical studies on the locking proximal humeral plate indicate the locked screw-plate combination is a more stable construct than conventional implants. The purpose of this study is to evaluate the clinical and radiological outcome in patients who have undergone operative treatment using this implant.

Twenty-three patients with displaced proximal humeral fractures underwent surgery using this implant. The mean age was 63.6 years (range, 40–85). Nineteen patients were female and 4 were male. The mean follow-up duration was 22.2 months (range, 5–38). All patients had a fracture configuration that required operative treatment. Three patients were lost to follow-up leaving 20 patients available for review. Patients were assessed clinically using the Constant score, pain scale and satisfaction scale. General health was assessed using the SF-12 survey. Radiographs were assessed looking at the initial reduction to determine whether an anatomical reduction with calcar support correlated with a better outcome.

The mean constant score was 62 (32.5–85). The mean age and sex-adjusted constant score was 83 percent (46–117). The mean pain score was 26mm (100mm scale), and the mean satisfaction score was 84 percent. Patients that were 60 years or younger had a lower age and sex adjusted constant scores (78, range 58–109 percent) than those over 60 years (87, range 46–117 percent) despite a better absolute score (63 vs. 61). The Physical Component Score of the SF-12 was better in the younger age group than it was in the older group (43 vs. 38) although the Mental Component Score was lower (45 vs. 54). Overall satisfaction was also lower in those 60-years and younger (79 compared with 86 percent). This may be explained by higher social demands on younger patients. Only 3 patients sustained the injury as result of high-energy trauma. These patients were significantly younger (50, range 40–56) than the low energy trauma group (65, range 46–85). Patients that sustained high-energy trauma had a better clinical outcome with a mean constant score of 74.3 compared with 59.6 for the low energy trauma group.

Nine patients did not have adequate medical (calcar) support with the initial reduction. Four of these patients developed complications. Two patients developed AVN requiring a hemi-arthroplasty. One patient had a valgus collapse of the head fragment and screw penetration requiring removal. One patient had a non-union requiring bone grafting and re-plating.

The proximal humeral locking plate provides a good clinical outcome. The results of this study correlate with the limited data available on these implants in the literature. A clinical benefit over alternative procedures is yet to be elucidated by a randomised clinical trial. An anatomical reduction with calcar support appears to result in a lower complication rate.

Distal clavicle fractures associated with coracoclavicular ligament disruption are potentially unstable¹. Internal fixation of these fractures is often inadequate due to two anatomical problems:

Inadequate distal fragment size and

We hypothesize that a contour-matched locking plate coupled with a coracoclavicular ligament repair device would provide a potentially safe and minimally invasive method for adequate fixation.

Between 2006 and 2008, 5 patients were surgically treated for non-comminuted distal clavicular fractures associated with coracoclavicular ligament disruption. The surgical technique consisted of

neutralization of muscular forces on the proximal fragment by using a minimally invasive ligament repair device (TightRope^™, Arthrex, FL), and

Technical tips to optimize this new procedure are presented. Outcome measures consisted of

Constant shoulder score

The retrospective follow-up period varied from 8 weeks to 24 months. A statistically significant improvement in the Constant score was observed in every patient. All patients progressed to satisfactory bony union. Plate removal was not necessary in any patient. Potential complications include screw penetration of the acromioclavicular joint, acromioclavicular ligament disruption, and distal fragment comminution.

A contour-matched locking plate coupled with a coracoclavicular ligament repair device is a new lesser invasive and safe anatomical approach for achieving fixation adequacy in a highly unstable but non-comminuted distal clavicular fracture subgroup. We recommend strict adherence to the guidelines presented (technical tips) to achieve an optimal result.