The aim of this study was to investigate the effect of different loading scenarios and foot positions on the configuration of the distal tibiofibular joint (DTFJ). Fourteen paired human cadaveric lower legs were mounted in a loading frame. Computed tomography scans were obtained in unloaded state (75 N) and single-leg loaded stand (700 N) of each specimen in five foot positions: neutral, 15° external rotation, 15° internal rotation, 20° dorsiflexion, and 20° plantarflexion. An automated three-dimensional measurement protocol was used to assess clear space (diastasis), translational angle (rotation), and vertical offset (fibular shortening) in each foot position and loading condition. Foot positions had a significant effect on the configuration of DTFJ. Largest effects were related to clear space increase by 0.46 mm (SD 0.21 mm) in loaded dorsal flexion and translation angle of 2.36° (SD 1.03°) in loaded external rotation, both versus loaded neutral position. Loading had no effect on clear space and vertical offset in any position. Translation angle was significantly influenced under loading by −0.81° (SD 0.69°) in internal rotation only. Foot positioning noticeably influences the measurement when evaluating the configuration of DTFJ. The influence of the weightbearing seems to have no relevant effect on native ankles in neutral position.
Glenohumeral joint injuries frequently result in shoulder instability. However, the biomechanical effect of cartilage loss on shoulder stability remains unknown. The aim of the current study was to investigate biomechanically the effect of two severity stages of cartilage loss in different dislocation directions on shoulder stability.
Joint dislocation was provoked for 11 human cadaveric glenoids in seven different dislocation directions between 3 o'clock (anterior) to 9 o'clock (posterior) dislocation. Shoulder stability ratio (SSR) and concavity gradient were assessed in intact condition, and after 3 mm and 6 mm simulated cartilage loss. The influence of cartilage loss on SSR and concavity gradient was statistically evaluated.
Between intact state and 6 mm cartilage loss, both SSR and concavity gradient decreased significantly in every dislocation direction (p≤0.038), except the concavity gradient in 4 o'clock dislocation direction (p=0.088). Thereby, anterior-inferior dislocation directions were associated with the highest loss of SSR and concavity gradient of up to 59.0% and 49.4%, respectively, being significantly higher for SSR compared to all other dislocation directions (p≤0.04). The correlations between concavity gradient and SSR for pooled dislocation directions were significant for all three conditions of cartilage loss (p<0.001).
From a biomechanical perspective, articular cartilage of the glenoid contributes significantly to the concavity gradient, correlating strongly with the associated loss in glenohumeral joint stability. The highest effect of cartilage loss was observed in anterior-inferior dislocation directions, suggesting that surgical intervention should be considered for recurrent shoulder dislocations in the presence of cartilage loss.
Osteochondral glenoid loss is associated with recurrent shoulder instability. The critical threshold for surgical stabilization is multidimensional and conclusively unknown. The aim of this work was to provide a well- measurable surrogate parameter of an unstable shoulder joint for the frequent anterior-inferior dislocation direction. The shoulder stability ratio (SSR) of 10 paired human cadaveric glenoids was determined in anterior-inferior dislocation direction. Osteochondral defects were simulated by gradually removing osteochondral structures in 5%-stages up to 20% of the intact diameter. The glenoid morphological parameters glenoid depth, concavity gradient, and defect radius were measured at each stage by means of optical motion tracking. Based on these parameters, the osteochondral stability ratio (OSSR) was calculated. Correlation analyses between SSR and all morphological parameters, as well as OSSR were performed. The loss of SSR, concavity gradient, depth and OSSR with increasing defect size was significant (all p<0.001). The loss of SSR strongly correlated with the losses of concavity gradient (PCC = 0.918), of depth (PCC = 0.899), and of OSSR (PCC = 0.949). In contrast, the percentage loss based on intact diameter (defect size) correlated weaker with SSR (PCC=0.687). Small osteochondral defects (≤10%) led to significantly higher SSR decrease in small glenoids (diameter <25mm) compared to large (≥ 25mm) ones (p ≤ 0.009). From a biomechanical perspective, the losses of concavity gradient, glenoid depth and OSSR correlate strong with the loss of SSR. Therefore, especially the loss of glenoidal depth may be considered as a valid and reliable alternative parameter to describe shoulder instability. Furthermore, smaller glenoids are more vulnerable to become unstable in case of small osteochondral loosening. On the other hand, the standardly used percentage defect size based on intact diameter correlates weaker with the magnitude of instability and may therefore not be a valid parameter for judgement of shoulder instability.
There is ongoing debate regarding the optimal surgical treatment of complex proximal humeral fractures in elderly patients. The aim of this study was to evaluate the cost-effectiveness of reverse total shoulder arthroplasty (RTSA) compared to hemiarthroplasty (HA) in the management of these fractures. A cost–utility analysis using decision tree and Markov modelling based on data from the published literature was conducted. A single-payer perspective with a lifetime time horizon was adopted. A willingness to pay threshold of CAD $50,000 was used. The incremental cost-effectiveness ratio (ICER) was used as the study's primary outcome measure. In comparison to HA, the incremental cost per QALY gained for RTSA was $13,679. One-way sensitivity analysis revealed the model to be sensitive to the RTSA implant cost and the RTSA procedural costs. Two-way sensitivity analysis suggested RTSA could also be cost-effective within the first two years of surgery with an early complication rate as high as 25% (if RTSA implant cost was approximately $3,000); or conversely, RTSA implant cost could be as high as $8,500 if its early complication rates were 5%. The ICER of $13,679 is well below the WTP threshold of $50,000 and probabilistic sensitivity analysis demonstrated that 92.6% of model simulations favoured RTSA. Our economic analysis found that RTSA for the treatment of complex proximal humeral fractures in the elderly is the preferred economic strategy when compared to HA. The ICER of RTSA is well-below standard willingness to pay thresholds, and its estimate of cost-effectiveness is similar to other highly successful orthopaedic strategies such as total hip arthroplasty for the treatment of hip arthritis.
The Radiographic Union Score for Hip (RUSH) is an outcome instrument designed to describe radiographic healing of femoral neck fractures. The ability to identify fractures that have not healed is important for defining non-union in clinical trials and predicting patients that likely require additional surgery to promote fracture healing. We sought to determine a RUSH threshold score that defines nonunion at 6-months post-injury. Our secondary objective was to determine if this threshold was associated with increased risk for non-union surgery. A sample of 248 patients with adequate six-month hip radiographs and complete two-year clinical follow-up were analysed from a multi-national hip fracture trial (FAITH). All patients had a femoral neck fracture and were treated with either multiple cancellous screws or a sliding hip screw. Two reviewers independently determined the RUSH score based on the six-month post-injury radiographs, and agreement was assessed using the Interclass Correlation Coefficient (ICC). Fracture healing was determined by two independent methods: 1) prospectively by the treating surgeon using clinical and radiographic assessments, and 2) retrospectively by a Central Adjudication Committee using radiographs alone. Receiver Operator Curve analysis was used to define a RUSH threshold score that was specific for fracture nonunion. RUSH score inter-rater agreement was high (ICC: 0.81, 95% CI 0.76 to 0.85). The mean six-month RUSH score for all included patients was 24.4 (SD 3.4). A threshold score of <18 was associated with a greater than 98% specificity for nonunion. Furthermore, patients with a six-month RUSH score below 18 were more the seven-times more likely to require revision surgery for nonunion (Relative Risk: 7.25, 95% CI 2.62 to 20.00). The six-month RUSH score can effectively be used to communicate when a femoral neck fracture has not healed. The validity of our conclusions was further supported by the increased risk of nonunion surgery for patients below the RUSH threshold. We believe our findings can standardise a definition of nonunion for clinical trials and recommend the use of the RUSH and its <18-point threshold when describing femoral neck nonunion.
We performed a systematic review of the literature
pertaining to the functional outcomes of the surgical management
of acetabular fractures. A total of 69 articles met our inclusion
criteria, revealing that eight generic outcome instruments were
used, along with five specific instruments. The majority of studies
reported outcomes using a version of the d’Aubigne and Postel score,
which has not been validated for use in acetabular fracture. Few validated
outcome measures were reported. No psychometric testing of outcome
instruments was performed. The current assessment of outcomes in
surgery for acetabular fractures lacks scientific rigour, and does
not give reliable outcome data for either scientific comparison
or patient counselling. Take home message: The use of non-validated functional outcome
measures is a major limitation of the current literature pertaining
to surgical management of acetabular fractures; future studies should
use validated outcome measures to ensure the legitimacy of the reported
results. Cite this article:
Perilesional changes of chronic focal osteochondral defects were assessed in the knees of 23 sheep. An osteochondral defect was created in the main load-bearing region of the medial condyle of the knees in a controlled, standardised manner. The perilesional cartilage was evaluated macroscopically and biopsies were taken at the time of production of the defect (T0), during a second operation one month later (T1), and after killing animals at three (T3; n = 8), four (T4; n = 8), and seven (T7; n = 8) months. All the samples were histologically assessed by the International Cartilage Repair Society grading system and Mankin histological scores. Biopsies were taken from human patients (n = 10) with chronic articular cartilage lesions and compared with the ovine specimens. The ovine perilesional cartilage presented with macroscopic and histological signs of degeneration. At T1 the International Cartilage Repair Society ‘Subchondral Bone’ score decreased from a mean of 3.0 ( The perilesional cartilage in the animal model became chronic at one month and its histological appearance may be considered comparable with that seen in human osteochondral defects after trauma.
