In total hip arthroplasty, the positioning of the acetabular cup, in particular, has been shown to play an important role in the survivorship of the prosthetic joint. The commonly accepted “safe zone” extends from 5–30° of anteversion to 30–50° of inclination. However, several studies have utilized a more restrictive safe zone of 5–25° of anteversion and 30–45° of inclination, a modification of the Lewinnek zone. Many attempts have been made to develop a more reliable method of positioning the acetabular component. Robotic-assisted surgery is one such method. The purpose of this study was to compare the resulting position of the acetabular component after robotic-assisted surgery with the intraoperative robotic data to determine if improved accuracy can be achieved with the robotic-assisted method. One hundred and nineteen patients received THA, at four different medical centers in the United States, using a haptic robotic arm. Pre-operative CT scans were obtained for all patients and used during the planning of the procedure, at which point the proposed component size and positioning was determined. Preparation of the acetabular bone bed, as well as impaction of the acetabular component itself, was performed using the robotic device. Using an AP Pelvis and Cross-Table Lateral radiograph, each patient's resulting acetabular inclination and version was measured using the Hip Analysis Suite software. The component position retrieved from the robot was compared to the measured values from the radiographs. The positioning data was compared to two safe zones described above.Introduction
Methods
