Prosthetic joint infections provide complex management, due to often-difficult diagnosis, need for multiple surgeries and increased technical and financial requirements. “2 in 1” single stage approaches have been advocated due to reduction in risks, costs and complications. This study aimed to investigate the results of single stage revision using metaphyseal sleeves for infected primary Total Knee Replacement (TKR).

Prospective data was collected on all patients presenting with an infected primary TKR over an 8-year period (2009–17). All revision procedures were undertaken in a single stage using metaphyseal sleeves.

26 patients were included, 2 of which had previously failed 2 stage revision and 3 failed DAIR procedures. Mean age was 72.5. Mean BMI was 33.4. Median ASA 2. Mean time to revision was 3.5 years range 3 months to 12 years. Six patients had actively discharging sinuses at the time of surgery. Only 4 of the 26 patients had no positive microbiological cultures from deep tissue samples or joint aspirates.

Only one patient has a recurrence of infection. This patient did not require further surgery and is treated on long term antibiotic suppression and is systemically well.

There were statistically significant improvements in both the pain and function component of AKSS scores. There was no significant improvement in flexion, however mean extension and total range of movement both showed statistically significant improvements.

Using Metaphyseal sleeves in single stage revision for infected TKR are safe and lead to an improvement in pain, function and have excellent efficacy for eradication of infection.

The aim of this study was to identify psychosocial factors associated with pain intensity and disability following distal radius fracture (DRF).

We prospectively followed up 216 adult patients with DRF for 9 months. Demographics, injury and treatment details and psychological measures (Hospital Anxiety and Depression Score (HADS), Pain Catastrophising Scale (PCS), Post Traumatic Stress Disorder Checklist – Civilian (PCL-C), Tampa Scale for Kinesiophobia (TSK), Illness Perception Questionnaire Brief (IPQB), General Self-efficacy Scale (GSES) and Recovery Locus of Control (RLOC)) were collected at enrolment. Multivariable linear regression was used to identify factors associated with DASH and Likert pain score.

Ten week DASH was associated with age (β-coefficient (β)= 0.3, p < 0.001), deprivation score (β=0.2, p = 0.014), nerve injury (β=0.1, p = 0.014), HADS depression (β=0.2, p = 0.008), IPQB (β=0.2, p = 0.001) and RLOC (β= −0.1, p = 0.031). Nine month DASH was associated with age (β=0.1, p = 0.04), deprivation score (β=0.4, p = 0.014), number of medical comorbidities (β=0.1, p = 0.034), radial shortening (β=0.1, p = 0.035), HADS depression (β=0.2, p = 0.015) and RLOC (β= −0.1, p = 0.027). Ten week pain score was associated with deprivation score (β=0.1, p = 0.049) and IPQB (β=0.3, p < 0.001). Pain score at 9 months was associated with number of medical comorbidities (β=0.1, p = 0.047).

Psychosocial factors are more strongly associated with pain and disability than injury or treatment characteristics after DRF. Identifying and treating these factors could enhance recovery.

An increasing number of distal humeral fractures are presenting as fragility fractures in low demand elderly patients. The optimal management of these injuries remains controversial. The primary aim of this study was to document the short and long term outcomes of these fractures treated with primary nonsurgical intervention. All patients were identified from a prospective trauma database from 1995 to 2010. All conservatively managed, isolated fractures of the distal humerus (OTA Type A,B,C) were included. Prospective long term follow up was collected by telephone interview. Demographic data, fracture classification, management protocol, subsequent surgeries, complications, range of motion, function and patient reported outcomes were recorded. The primary short-term outcome measure was the Broberg and Morrey Elbow Score. The primary long-term outcome measure was the DASH score.

Sixty-two patients were included. Mean age 76 (range, 11–96). Low-energy injuries were seen in 97% (59/61) of patients and ≥1 co-morbidities in 50% (27/54). At a mean of 3.7 months (range, 1–14) mean Broberg and Morrey score was 86 (range, 52–100); 70% (28/40) achieving excellent or good short-term outcome. Long-term follow-up was available in 17% (n=11) patients, with 75% (48/64) deceased. At a mean of 7 years (range, 4–17) mean DASH was 23.6 (range, 0.8–45.8), mean Oxford Elbow Score was 42 (range, 32–48). Overall patient satisfaction was 100% (n=11). One patient subsequently underwent open reduction internal fixation for malunion. We have reported satisfactory short-term and longer-term outcomes following the nonsurgical management of isolated distal humerus fractures in older lower demand patients.

Introduction:

Restoration of normal hip biomechanics is vital for success of total hip arthroplasty (THA). This requires accurate placement of implants and restoration of limb length and offset. The purpose of this study was to assess the accuracy of computer navigation system in predicting cup placement and restoring limb length and offset.

The primary aim of this study was to identify risk factors for developing neuritis and its impact on outcome following open reduction internal fixation (ORIF) of distal humerus fractures.

Patients were identified from a prospective trauma database (1995–2010). All fractures of the distal humerus (OA-OTA Type A, B, C) managed with ORIF were included. Prospective long-term follow up was collected by telephone. Demographic data, fracture classification, intraoperative details (time to surgery, tourniquet, approach, fixation technique, nerve transposition), subsequent surgeries, presence of postoperative nerve palsy, complications and range of motion were collected. The Broberg and Morrey Elbow Score and DASH score were used as functional outcome measures.

Eighty-two patients, mean age 50(range, 13–93) were included. 16% (13/82) developed post-operative ulnar neuritis, 7% (6/82) radial neuritis and 5% (4/82) longterm nonspecific dysaesthesia. Short-term (mean 10 months, range 1–120, collected in 82 patients) and long-term (mean 6 years, range 4–18, collected in 45%, 34/75, of living patients) was completed. In patients with nerve complication: average Broberg and Morrey score was 86 (76% good/excellent), average DASH was 24.7(range, 3.3–100) and Oxford Elbow Score was 39.5(range, 18–48). Compared to: 94 (96% good/excellent), 17.7(range, 0–73.3) and 43.8(range, 17–48) in patients without. Mean pain score was 3.7 in patients with nerve complication compared to 2 without. Nerve complications were seen with increased frequency in young, male patients with high energy and Type C injuries.

Nerve complication following ORIF of distal humerus fractures is relatively common. They have detrimental impact on functional outcome. Certain groups appear to be at increased risk.

This study measured the three bony axes usually used for femoral component rotation in total knee arthroplasty and compared the accuracy and repeatability of different measurement techniques.

Fresh cadaveric limbs (n=6) were used. Three observers (student, trainee and consultant) identified the posterior condylar (PCA), anteroposterior (AP) and the transepicondylar (TEA) axes, using a computer navigation system to record measurements. The AP axis was measured before and after being identified with an ink line. The TEA was measured by palpation of the epicondyles both before and after an incision was made in the medial and lateral gutters at the level of the epicondyles, allowing the index finger to be passed behind the gutters. In addition the true TEA was identified after dissection of all the soft tissues. Each measurement was repeated three times. For all axes and each observer the repeatability coefficient was calculated.

The identification of the PCA was the most reliable (repeatability coefficient: 1.1°) followed by the AP after drawing the ink line (4.5°) then the AP before (5.7°) and lastly the TEA (12.3°) which showed no improvement with the incisions (13.0°). In general the inter-observer variability for each axis was small (average 3.3°, range 0.4° to 6°), being best for the consultant and worst for the student. In comparison to the true TEA, the recorded TEA and AP axis averaged within 1.5° whilst the PCA was consistently 2.8° or more internally rotated.

This study echoed previous studies in demonstrating that palpating the PCA intra-operatively is highly precise but was prone to errors in representing the true TEA if there was asymmetrical condylar erosion. The TEA was highly variable irrespective of observer ability and experience. The line perpendicular line to the AP axis most closely paralleled the true TEA when measured after being identified with an ink line.

Introduction

Restoration of normal hip biomechanics is vital for success of total hip arthroplasty (THA). This requires accurate placement of implants and restoration of limb length and offset. The purpose of this study was to assess the precision and accuracy of computer navigation system in predicting cup placement and restoring limb length and offset.

Vancouver B fractures around a cemented polished tapered stem (CTPS) are often treated with revision arthroplasty. Results of osteosynthesis in these fractures are poor as per current literature. However, the available literature does not distinguish between fractures around CTPS from those around other stems.

The aim of our study was to assess the clinical and radiological outcome of open reduction and internal fixation in Vancouver B fractures around CTPS using a broad non-locking plate.

Patients treated with osteosynthesis between January 1997 and July 2011 were retrospectively reviewed. All underwent direct reduction and stabilisation using cerclage wires before definitive fixation with a broad DCP. Bicortical screw fixation was obtained in the proximal and distal fragments. We defined failure of treatment as revision for any cause.

101 patients (42 men and 59 women, mean age 79) were included. 70 had minimum follow-up of 6 months. 63 of these went on to clinical and radiological union. Three developed infected non-union. 7 had failure of fixation. Lack of anatomical reduction was the commonest predictor of failure followed by inadequate proximal fragment fixation and infection. 14 patients dropped at least 1 mobility grade from their preoperative status.

This is the largest series of a very specific group of periprosthetic fractures treated with osteosynthesis. Patients who develop these fractures are often frail and “high risk” for major revision surgery. We recommend osteosynthesis for patients with Vancouver B periprosthetic fractures around CTPS provided these fractures can be anatomically reduced and adequately fixed.

Introduction

Success of total hip replacement (THR) is closely linked to positioning of the acetabular component. Malalignment increases complication rates. Our aim was to describe the anteversion and inclination of the inherent acetabulum in arthritic hips and identify the number that fall out with the ‘safe zone’ of acetabular position described by Lewinnek et al. (anteversion 15±10 degrees; inclination 40±10 degrees).

Introduction

Soft tissue balancing is an important aspect of total knee replacement surgery. Traditionally sequential medial soft tissue release is performed for balancing in varus deformity. Its effects on kinematics and dynamic Femoro-Tibial-Mechanical-Angle (FTMA) have been described in extension and 90° flexion in coronal plane. However most studies have missed what happens when the knee flexes from 0 to 90 degrees This study is one of the first to describe its effects on knee kinematics throughout flexion. The aim was to look at deviation of FTMA in coronal plane with traditional sequential medial release with and without measured stress applied in varus and valgus at each point of measurement through the range of flexion.

Introduction

The success of total hip replacement (THR) is closely linked to the positioning of the acetabular component. Malalignment increases rates of dislocation, impingement, acetabular migration, pelvic osteolysis, leg length discrepancy and polyethylene wear. Many surgeons orientate the cup to inherent anatomy of the acetabulum. Detailed understanding of the anatomy and orientation of the acetabulum in arthritic hips is therefore very important. The aim of this study was to describe the anteversion and inclination of the inherent acetabulum in arthritic hips and to identify the number that fall out with the ‘safe zone’ of acetabular position described by Lewinnek et al. (anteversion 15°±10°; inclination 40°±10°).

Traditionally sequential medial soft tissue release is performed for balancing in total knee arthroplasty for varus knees. Its effects on kinematics have been described in extension and 90° flexion in coronal plane. This is the first study to describe its effects on kinematics throughout flexion. 12 cadaveric knees were studied using a computer navigation system to assess kinematics. Femoro-Tibial-Mechanical-Angle(FTMA) was studied in extension, 0°, 5°, 30°,45°,60°,90° and maximum flexion. Sequential medial release was performed in 7 steps, described by Luring et al(Ref). At each step FTMA was measured without and with stressing. A 10 Newton Meter moment arm was applied for varus and valgus stress. Most of the initial release steps had little effect on FTMA without force applied, especially in the initial 60° of flexion. Application of varus force demonstrated very small changes. Application of valgus force demonstrated little change in initial arc of flexion until step 5 was reached (Table 1). Our study concludes the present sequence of medial release may not be correct and should be further investigated to modify the sequence for soft tissue balancing in TKR surgery.

The success of total hip replacement (THR) is closely linked to the positioning of the acetabular component. Malalignment increases rates of dislocation, impingement, acetabular migration, pelvic osteolysis, leg length discrepancy and polyethylene wear. Many surgeons orientate the cup in the same anteversion and inclination as the inherent anatomy of the acetabulum. The transverse acetabular ligament and acetabular rim can be used as a reference points for orientating the cup this way. Low rates of dislocation have been reported using this technique. Detailed understanding of the anatomy and orientation of the acetabulum in arthritic hips is therefore very important. The aim of this study was to describe the anteversion and inclination of the inherent acetabulum in arthritic hips and to identify the number that fall out with the ‘safe zone’ of acetabular position described by Lewinnek et al. (anteversion 15°±10°; inclination 40°±10°).

A series of 65 hips, all with symptomatic osteoarthritis undergoing THR were investigated. Patients with developmental dysplastia of hip (DDH) were excluded. All patients had a navigated THR as part of their normal clinical treatment. A posterior approach to the hip was used. A commercially available non image based computer navigation system (Orthopilot BBraun Aesculap, Tuttlingen, Germany) was used. Rigid bodies (using active trackers) were attached to pelvis and femur. Anterior pelvic plane was registered using the two anterior superior iliac spines and pubic symphysis. The femoral head dislocated and removed and the labrum and soft tissue were excised to clear floor and rim of the acetabulum. Inner size of the empty acetabulum was sized with cup trials and appropriately size trial fixed with a computer tracker was then aligned in the orientation of the natural acetabulum as defined by the acetabular rim ignoring any osteophytes. The inclination and anteversion were calculated by the software. Surgery then proceeded with guidance of the computer navigation system. The computer software defines the anatomical values of orientation, to allow comparison with radiographs these were converted to radiological values as described by Murray et al. The acetabular inclination in all hips was also measured on pre-operative anteroposterior pelvic radiographs. This was done using digital radiographs analysed with the PACS system (Kodak, Carestream PACS Client, version 10.0). Acetabular inclination was measured using as the angle between a line passing through the superior and inferior rim of the acetabulum and a line parallel to the pelvis as identified by the tear drops, using the method described by Atkinson et al.

All patients were Caucasian and had primary osteoarthritis. There were 29 males and 36 females. The average age was 68 years (SD 8). Mean anteversion was 9.3° (SD 10.3°). Anteversion for males was significantly lower than females with a mean difference of −5.5° (95%CI −10.5°,−0.5°) p = 0.033 but there was no significant difference in the number falling outside the “safe zone”. Mean inclination was 50.4° (SD 7.4°). There was no significant difference between males and females with respect to inclination angle or the number that fell outside the “safe zone”. Overall 69% of patients had a combined inclination and anteversion of the native acetabulum that fell outside the “safe zone” of Lewinnek.

Mean acetabular inclination falls out with the ‘safe zone’. This trend has been seen in a recent study of arthritic hips using CT scans which found that the average angle of inclination in both males and females was greater than the upper limit of the safe zone. This study using CT also demonstrated a statistically significant 5.5° difference between males and females in terms of anteversion. This is the same as the figure we have found in our work. Inherent acetabular orientation in arthritic hips falls out with the safe zone defined by Lewinnek in 69% of cases. When using the natural acetabular orientation as a guide for positioning implants it should therefore not be assumed this will fall with in the safe zone although the validity of safe zones itself is questionable. Variation between patients must be taken into account and the difference between males and females, particularly in terms of anteversion, should also be considered.

Native anatomy of the arthritic hip is an important consideration in hip replacement surgery and implant design. Acetabular component orientation in total hip replacement (THR) is the single greatest factor that influences dislocation rate. Detailed knowledge regarding orientation of the native acetabulum is therefore essential. Native acetabular orientation in healthy hips is well documented but we could not find any papers detailing native acetabular orientation in the arthritic hip.

A commercially available computer navigation system (Orthopilot BBraun Aesculap, Tuttlingen, Germany) was used to assess acetabular inclination and anteversion in 65 hips with symptomatic arthritis requiring THR. Acetabular inclination in all hips was also measured on pre op anteroposterior pelvic radiographs.

Patients with DDH were excluded. All patients were Caucasian and had primary osteoarthritis, 29 males and 35 females. Average age 68(SD 8). Mean values as recorded by computer navigation were: inclination 51.4°(SD 7.1); anteversion 11.7°(SD 10.7). As recorded from radiographs mean acetabular inclination was 58.8°(SD 5.7). There was a difference between males and females. Mean navigated inclination: male 50.5°(SD 7.8); female 52.1°(SD 6.7). Mean navigated anteversion: male 8.3°(SD 8.7); female 14.39°(SD 11.6) Mean radiographic inclination: male 57.4°(SD 5.1) and female 59.8°(SD 6)

Natural acetabular orientation in arthritic hips falls out with the safe zones defined by Lewinnek. When compared with healthy hips, as described in current literature, the arthritic hip appears to have a smaller angle of inclination and anteversion, by approximately 5° and 10° respectively, in both males and females. This is useful when positioning the cup during surgery. The difference between males and females, particularly in terms of anteversion, should also be considered.

Fixed flexion contracture (FFC) following total knee arthroplasty (TKA) is a source of morbidity for patients. This retrospective review of pre- and post-operative data for 811 total knee replacements with two year follow up aimed to identify pre-operative risk factors for developing FFC and quantify the effect of FFC on outcomes. The incidence of FFC two years post-operation was 3.6%. Advanced age was associated with increased rate of FFC (p=0.02) Males were 2.6 times more likely than females to have FFC at two years (p=0.012). Patients with pre-implant FFC were 2.95 times more likely than those without to have FFC (p=0.028). BMI was not a risk factor (p=0.968). Patients with FFC had poorer outcomes (Oxford Knee Score p=0.003, patient satisfaction p=0.036). The results of this study support the existing literature and clarify a previously contentious point by excluding BMI as a risk factor.