Introduction

In most cases of stable type medial femoral neck fracture and some cases of dislocated medial femoral neck fracture, internal fixation was undertaken. Dual SC Screw (DSCS) System is an internal fixation device which has sliding mechanism and preventing mechanism of back out of the screw. The purpose of this study is to evaluate the results and complication of medial femoral neck fracture treated with DSCS.

Introduction

Plate fixations have been recommended for dislocated clavicle fractures. However, existing plates are inadequate for morphological compatibility with the clavicle. The aim of this study is to measure the anatomical shape of the clavicle and to compare the radiographical and clinical outcomes of our tree-dimensional (3D) reconstruction plate with conventional straight plate.

Aims

Dual SC Screw (DSCS) is a novel fixation device for the femoral neck fracture. DSCS is comprised of screw and barrel allowing sliding of the screw and preventing protrusion of the screw end. Two types of the barrels are available, threaded barrel (TB) and plate barrel (PB). Ordinarily, both barrels are implanted. Concept of the design is that the PB contributes stability to the screw against the varus force of the femoral head while the additional screw with TB prevents rotational deformity. The aim of this study was to represent clinical results after DSCS operation in patients with femoral neck fracture.

Thirty-three knees in thirty-three patients who underwent ACLR using four-strand semitendinousus and gracilis tendon in our hospital were included in this study. In 17 knees, we use a fluoroscopic-based navigation system (Vector Vision ACL, BrainLab. Inc.) for positioning of the tunnels (Group 1). In the remaining 16 knees, positioning of the femoral and tibial tunnels was done without navigation (Group 2).

In navigation operation, anteroposterior and lateral images of the knee were taken with a fluoroscope and captured into the computer. The optimal target points for bone tunnels were semi-automatically calculated and displayed on the screen. Femoral placement was determined based on the quadrant method. The target for tibial tunnel was set at 43% of tibial plateau AP length. Intraoperatively, positions of the drill guides were decided referring to both navigation image and arthroscopic image. We evaluated Lysholm score, International Knee Documentation Committee (IKDC) subjective score, Lachman test and pivot shift test at 1 year after operation and calculated bone tunnel position on the postoperative lateral x-ray films and expressed them as relative values against total AP length of the Blumensaat's line and of the tibia plateau.

Lysholm score, IKDC subjective score, Lachman test and pivot shift test were not significantly differed between the groups. The femoral tunnels were 74.2±3.3% in Group 1 and 71.7±6.0% in Group 2 along and the tibial tunnels were 42.1±1.4% in group 1 and 43.0±4.6% in group 2 along the tibia plateau. Although femur and tibial tunnel positions were not significantly differed between the groups, variation of bone tunnel position was significantly smaller in Group 1, indicating a good reproducibility. One pin tract infection occurred in Group 1. This case successfully treated with debridment and antibiotics containing cement filling.

Fluoroscopic navigation system is quite helpful for precise and reproducible creation of both femur and tibial tunnel. The results encourage us to use this system for double-bundle anatomical ACLR. However, a special care must be taken to avoid complication caused by tracker pin placement.

The ligament balance as well as the alignment is essential for successful total knee arthroplasty (TKA). However it is usually assessed and adjusted only at 0? and 90?. In order to evaluate the ligament balance at the other angles we have used a navigation system. Twenty-one patients underwent posterior stabilised mobile bearing TKA using a CT-based navigation system were included in this study. Immediately post-operation and still under anaesthesia, varus and valgus stresses were applied on operated knees manually at 0?, 30?, 60?, 90? and 120?. The ligament balance was calculated based on the angles under varus and valgus stress displayed on the navigation screen, presenting a relationship between the femoral and tibial cutting planes. The mean ligament balance angle at 0?, 30?, 60?, 90? and 120? were −2? ± 3.6?, −5.8? ± 7.9?, 5.0? ± 6.9?, −1.3? ± 5.4?, 7.9? ± 7.2?, respectively. At 0? and 90? balance was well adjusted, however in the other angles, it was quite varied. At 30? and 120?, the lateral side was loose, on the other hand, medial side was looser at 60? knee flexion angle. The good balance at 0? and 90? is understandable because the balance is assessed and adjusted in these angles. Regarding the other angles, the 30? and 120? results corresponded with previous studies; however, the 60? results did not correlate. Although the reason is unknown, it must be aware the mid-flexion and deep flexion instability is quite common. Further investigations about the impact on clinical outcomes of such instabilities and how to adjust them if they are critical are needed.

We undertook a prospective, randomised study in order to evaluate the efficacy of clamping the drains after intra-articular injection of saline with 1:500 000 adrenaline compared with post-operative blood salvage in reducing blood loss in 212 total knee arthroplasties. The mean post-operative drained blood volume after drain clamping was 352.1 ml compared to 662.3 ml after blood salvage (p < 0.0001). Allogenic blood transfusion was needed in one patient in the drain group and for three in the blood salvage group. Drain clamping with intra-articular injection of saline with adrenaline is more effective than post-operative autologous blood transfusion in reducing blood loss during total knee arthroplasty.

We describe a patient with a traumatic spondylolisthesis of L5 and multiple, bilateral pedicle fractures from L2 to L5. Conservative treatment was chosen, with eventual neurological recovery and bony union. We are not aware of previous reports of this pattern of injury.

We have reviewed 41 patients with pustulotic arthro-osteopathy (PAO), all having both the typical skin rash of pustulosis palmaris et plantaris and bone lesions. The most common bones affected were the clavicle, sternum and ribs. Changes in the clavicle started, not as an enthesopathy, but with periosteal bone formation, indicative of a bone marrow disorder. About 30% of the patients also had lesions in the spine, sacroiliac region or the peripheral joints. Bone and joint lesions followed a variable and intermittent clinical course over a long period of time. Biopsies in eight cases showed similar inflammatory changes in skin, bone and synovium, with infiltration of lymphocytes and polymorphonuclear leucocytes. This suggests that there is a common pathogenesis in the three tissues.