Abstract

Enhanced recovery pathways (ERPs) utilise multimodal rehabilitation techniques to reduce post-operative pain and accelerate the rehabilitation process following surgery. Originally described following elective colonic surgery enhanced recovery pathways have gained increasing use following elective hip and knee joint replacement in recent years. Early studies have indicated that enhanced recovery pathways can reduce length of hospital stay, reduce complications and improve cost-effectiveness of joint replacement surgery. Despite this growing evidence base uptake has been slow in certain centres and many surgeons are yet to utilise enhanced recovery pathways in their practice. We look at the process and effects of implementing an enhanced recovery pathway following total hip replacement surgery at a district general hospital in the United Kingdom.

A retrospective study was initially undertaken over a four-month period to assess patient demographics, length of stay, time to physiotherapy and complication rates including re-admission within 28 days.

Based on national recommendations an enhanced recovery pathway protocol was then implemented for an elective total hip replacement list. Inclusion criteria were elective patients undergoing primary total hip replacement (THR) surgery. The pathway included pre-operative nutrition optimisation, 4mg ondansetron, 8mg dexamethasone and 1g tranexamic acid at induction and 150mL ropivacaine HCL 0.2%, 30mg ketorolac and adrenaline (RKA) mix infiltration to joint capsule, external rotators, gluteus tendon, iliotibial band, soft-tissues and skin around the hip joint. The patient was mobilised four-hours after surgery where possible and aimed to be discharged once mobile and pain was under control.

Following implementation a prospective study was undertaken to compare patient demographics, length of stay and complication rates including re-admission within 28 days.

34 patients met the inclusion criteria and were included in each group pre and post-enhanced recovery pathway. Following implementation of an enhanced recovery pathway mean length of stay decreased from 5.4 days to 3.5 days (CI 1.94, p < 0.0001). Sub-group analysis based on ASA grade revealed that this reduction in length of stay was most pronounced in ASA 1 patients with mean length of stay reduced from 5.0 days to 3.2 days (CI 1.83, p < 0.0001). There was no significant change in the number of complications or re-admission rates following enhanced recovery pathway.

The enhanced recovery pathway was quick and easy to implement with co-ordination between surgeons, anaesthetist, nursing staff and patients. This observational study of consecutive primary total hip replacement patients shows a substantial reduction in length of stay with no change in complication rates after the introduction of a multimodal enhanced recovery protocol. Both of these factors reduce hospital costs for elective THR patients and may improve patient experiences.

Osteoporosis (OP) results in a reduction in the mechanical competence of the bone tissue of the sufferers. In skeletal sites such as the proximal femur and the vertebrae, OP manifests itself in low trauma fragility fractures which are debilitating for the patient. The relationships between the compressive strength of cancellous tissue and its apparent density are well established in studies of the past. Recently the authors have presented a method able to assess the fracture toughness properties of cancellous bone (1), a challenging cellular material which can exhibit large elasto-plastic deformations. The in-vitro measurement of fracture toughness alongside the customary compressive strength can provide a comprehensive assessment of the mechanical capacity of cancellous bone, which will reflect closer its ability to resist crack initiation. The aims of the present study were: (1) to examine whether the observed fracture toughness deterioration can also be detected by non-invasive quantitative ultrasound (QUS); and (2) to provide rational evidence for the well proven ability of QUS to predict directly ‘risk of fracture’. 20 femoral heads were obtained from donors undergoing emergency surgery for a fractured neck of femur. QUS investigations of the calcaneus, proximal phalanx and distal radius were undertaken within 72 hours of surgery. 128 fracture toughness samples and 20 compression cores were manufactured and tested. Two clinical QUS systems were used to obtain in-vivo scan data and then directly compared those to the density, porosity and the fracture mechanics of tissue extracted from the same individuals. The results demonstrated not only that there was a significant link between in-vivo determined QUS values for the calcaneus and finger to the density of the density of the femoral head; but that there was also a significant link between the QUS results from the calcaneus and the fracture toughness of the cancellous bone from the femoral head. These results point towards a systemic effect of osteoporosis which affects similarly different parts of the skeleton and supports the use of clinical QUS systems as a diagnostic tool for the prediction of fracture risk.

The aim of this study is to compare functional, clinical and radiological outcomes in K-wire fixation versus volar fixed-angle plate fixation in unstable, dorsally angulated distal radius fractures.

Fifty-four adult patients with an isolated closed, unilateral, unstable, distal radius fracture were recruited to participate in the study. Only dorsally displaced fractures with no articular comminution were included. Patients were randomised to have their fracture treated with either closed reduction and K-wire fixation (3 wires) or fixed-angle volar plating. Both groups were immobilised in a below elbow cast for six weeks. The wires removed in the outpatients at six weeks and both groups were referred for physiotherapy. Independent clinical review was performed at three and six months post injury. Functional scoring was performed using the DASH and Gartland and Werley scoring systems. Radiographs were evaluated by an independent orthopaedic surgeon.

Twenty-five patients were treated with a plate and twenty-nine with wires. There were no complications in the plate group. There were 9 complications in the K-wire group with 3 patients requiring a second operation (1 corrective osteotomy for malunion, 1 median nerve decompression and 1 retrieval of a migrated wire). The remaining complications included: 5 pin site infections (3 treated with early pin removal and 2 with oral antibiotics only), and 1 superficial radial nerve palsy. There were no tendon ruptures.

Both groups scored satisfactory functional results with no statistical difference. There was a statistically significant difference in the radiological outcomes with the plate group achieving better results.

We conclude that in unstable dorsally angulated distal radius fractures volar fixed-angle plate fixation is able to achieve comparable functional results to K-wire fixation with better radiological results and fewer complications. This has resulted in a change in our clinical practice.

Purpose: This study compares clinical and radiological outcomes of K-wire fixation with volar locking plate (i.e. fixed angle) fixation in unstable, dorsally angulated, distal radius fractures.

Materials and methodology: Fifty four adult patients with an isolated, closed, unstable, dorsally angulated fracture without articular comminution were randomised to closed reduction and K-wire fixation (3 wires) or volar locking plate fixation. All were immobilised in a cast for six weeks and prescribed physiotherapy. Independent clinical and radiological assessment was performed at 3 and 6 months post injury, using the DASH and Gartland & Werley scoring systems.

Results: Twenty-four patients were treated with a plate and thirty with K-wires.

There were no complications in the plate group. There were 9 complications in the K-wire group. Three patients required re-operation (for malunion, median nerve compression, and retrieval of a migrated wire). Remaining complications included: 5 pin-site infections and 1 superficial radial nerve palsy.

Plate fixation achieved statistically significant better radiological and functional results.

Conclusion: Volar locking plate fixation achieves better radiological and functional results with fewer complications than K-wire fixation in unstable, dorsally angulated, distal radius fractures.

Methicillin-resistant Staphylococcus aureus (MRSA) has increased in prevalence and significance over the past ten years. Studies have shown rates of MRSA in Trauma and Orthopaedic populations to be from 1.6% to 38%. Rates of MRSA are higher in long term residential care.

It has been Department of Health policy to screen all Trauma and Orthopaedic patients for MRSA since 2001. This study audited rates of MRSA screening in patients who presented with fractured neck of femur treated with Austin Moore hemi-arthroplasty over the course of one year. Rates of MRSA carriage and surgical site infection (SSI) were derived from the computerised PAS system and review of case notes.

9.8 % of patients were not screened for MRSA at any time during their admission. The rate of MRSA carriage within the study population was 9.2%. The MRSA SSI rate was 4.2%. MRSA infections are associated with considerable cost and qualitative morbidity and mortality.

There is good evidence for the use of nasal muprocin and triclosan baths in reducing MRSA. Single dose Teicoplanin has been shown to be as effective as traditional cephalosporin regimes. There is new guidance for the use of prophylactic Teicoplanin for prevention of SSI. We should consider introducing both topical and antimicrobial MRSA prophylaxis.

Cemented, polished, tapered stems have produced excellent results, but some early failures occur in younger patients. The CPS-Plus stem (Plus Orthopedics AG, Switzerland) is a polished double taper with rectangular cross section for improved rotational stability. A unique proximal stem centraliser increases cement pressurisation, assists alignment and creates an even cement mantle.

Radiostereometric analysis has demonstrated linear subsidence in a vertical plane, without any rotation or tilt. These features should improve implant durability. Midterm (5 years) results of a prospective international multicentre study are presented.

Materials and Methods: 222 patients (230 hips) were recruited to this IRB-approved study at three centres in the UK and two in Norway. Clinical and radiographic outcomes were assessed at regular intervals.

Results: 160 hips in 153 patients were available for full clinical and radiographic evaluation. 27 patients have died, 30 patients were unable to attend (outcome known) and 12 patients have not reached 5 years follow-up.

The mean Harris hip score improved from 42 preoperatively to 91. There have been no revisions for aseptic loosening and none of the stems have radiographic evidence of loosening. There has been one revision for deep sepsis. With revision for aseptic loosening as an endpoint, stem survivorship is 100%.

Conclusion: The design of the CPS-Plus stem attempts to address the issues of cement pressurization, rotational stability, and subsidence. Earlier laboratory studies have now been supplemented by this clinical evaluation, performed in a number of different centres by several surgeons, and the midterm results are very encouraging.

Introduction The CPS-Plus stem (Endoplus UK) is a polished double-taper with rectangular cross section maintained throughout for rotational stability. There are 5 stem sizes with proportionate offset, and 5 neck length options. A unique proximal stem centraliser has been shown to increase proximal cement pressurisation during insertion in-vitro, also assists with alignment of the stem and helps create an even cement mantle. RSA analysis has demonstrated linear subsidence in a vertical plane, without posterior head migration and valgus tilt.

We report a multi-centre prospective clinical trial. 231 hips in 223 patients have been entered into the study. 151 of these have reached 3 years follow-up.

Method Patients were recruited by surgeons working at three centres in the UK, and two in Norway. Merle d Aubigne and Postel, Harris, and Oxford hip scores were recorded pre-operatively and at follow-up (3, 6, 12, 24, 36, 60 months). Radiographic assessment included evaluation of subsidence and the presence of any radiolucencies.

Results Hip scores have been very satisfactory. Radiological subsidence is less than 1.5mm in over 95% of cases and only one stem has subsided more than 3mm. There has been one revision for deep sepsis, 7 dislocations and one femoral fracture, but none of these complications were related to the choice of femoral component. There have been no revisions for aseptic loosening. Kaplan Meier survivorship analysis at 36 months for aseptic stem loosening is 0.997 (95% CI 0.977 – 1) and for all-cause revision is 0.981 (95% CI 0.958 – 1). 53 hips had reached 5-year follow-up at 30/9/04.

Discussion The tradition of polished tapered stems arose from serendipity and most results have been excellent. The CPS-Plus stem represents an attempt to re-examine the issues relating to rotational stability, subsidence, cement pressurisation and offset. Earlier laboratory studies have now been supplemented by this clinical evaluation, performed in a number of different centres by several surgeons, and the evidence is encouraging.

In particular, the RSA subsidence characteristics, cement pressurisation and rotational stability already associated with this implant in-vitro have been supported by excellent survivorship analysis, and the authors believe that increasing familiarity with the concepts raised by this implant will result in clinical benefits in relation to polished taper cemented stem longevity.

Inadequate cementation remains a prime cause of aseptic loosening in Hip Arthroplasties. While good progress has been made in preparation of femoral canal and cement, with newer techniques there are problems with ensuring adequate cement mantle. A distal centraliser available with some prosthesis does aid in better alignment and distal centralisation, but proximal centralisation remains a problem especially with some approaches.

We have recently used a new prosthesis CPS (Endoplus) which has a smooth polished double tapered design and also comes with a proximal and distal centraliser. We undertook a study to evaluate the effect of these on cement mantle, stem alignment, centralisation and supero-medial cement thickness. We defined adequate mantle as a thickness of at least 2mm. 75 consecutive cases were included in the study. All cases were done either by or under direct supervision of the senior author using the antero-lateral approach.

We found 88% of stem’s aligned within 2 deg. of anatomical axis of the femur. Distal tip of the prosthesis was within 2mm of centre of the medullary canal in 92% in the lateral view and in 95% in AP view. Deficiencies in cement mantle were noted in very few cases, zones 6 & 13 had the highest incidence but even here only 9% of cases had inadequate cementation.

We find the centralisers a useful adjunct in cemented hip arthroplasty.

Aims: Given that all previous reports on the increased-crystalinity, increased modulus of elasticity, yield strength and density Hylamer polyethylene have been based on observations on uncemented metal-backed acetabular cups, the aim of the present study is to investigate the rate of wear of a cemented Hylamer UHMWPE acetabular cup. Methods: 36 consecutive cases of THA (mean age: 54.7 years) using a cemented Hylamer UHMWPE acetabular cup and a cemented femoral stem were prospectively followed-up with yearly radiographs for an average period of 54.4 months. Two-dimensional femoral head penetration was determined from AP pelvic radiographs, using computeraided uniradiographic methodology. Multiple regression analysis was used to identify all predictor variables that may account for increased average linear and calculated volumetric wear (Kabo’s formula), as well as for increased total area of peri-prosthetic osteolysis on the femoral and acetabular sides. Results: The average linear wear rate was 0.35 mm/year (SD 0.12) with a significantly high average linear wear rate during the initial (‘wear-in’) period (approximately 12–18 months). The average total volumetric wear was calculated to 764.4 mm3 and the average volumetric wear rate to 169.8 mm3/year. Significant osteolysis was seen in an average of 1.5 (range: 0 to 7) out of the 7 Gruen zones on the femoral side and an average of 1 (range: 0 to 3) out of the 3 Charnley-Delee zones on the acetabular side. Conclusions: Increased rate of linear wear and a high rate of peri-prosthetic osteolysis have been observed in the early results of our series of cemented Hylamer UHMWPE acetabular cups.