Introduction

The prevalence of adverse reactions to metal debris (ARMD) associated with metal on metal (MoM) hip arthroplasty has been reported to be as high as 69%. Such findings promoted the development of metal-artefact reducing sequence (MARS)-magnetic resonance imaging (MRI) classifications, with the aim of stratifying soft lesions by severity of disease. The Modified Oxford Classification is a straightforward system that has been shown to correlate with disease progression.

This study looks at the use of rotating hinge Total Knee Replacement (TKR) as a treatment option when dealing with fractures involving the knee.

The treatment of complex intra-articular fractures involving the knee has always proved challenging. Studies have investigated the outcome of various forms of treatment for such injuries, including internal fixation and primary knee arthroplasty. Recent advances in technology have brought about more sophisticated implants for both internal fixation and arthroplasty, including rotating hinge TKR.

The initial non-rotating hinged prostheses for total knee arthroplasty did not enjoy a good reputation. The cumulative survival rate has been quoted as 65% at 6 years, significantly lower than that of conventional prostheses. Therefore the use of such implants was restricted to complex primary or revision arthroplasty, and tumour surgery. Studies have been published advocating the use of hinged prostheses for distal femoral fractures in elderly patients. The average age in the most recent study was 82, of whom 42% had died within the first post-operative year.

This study is a case series of 16 patients with fractures who were treated with rotating hinge TKR. The age range is 36 to 92, with a mean of 69, lower than that of earlier studies. Outcome data as measured by the Oxford knee scoring system has been retrospectively collected. At follow up the range of Oxford knee scores was 14 to 52, with a mean of 36. We discuss the indications, experiences and outcomes in the management of these patients, and conclude that this is a valid treatment option in certain circumstances.

Long-term follow up after replacement arthroplasty has become established as a “Gold Standard”, providing information that can aid optimisation in future prosthetic design and use. In less mainstream joint replacements however, the evidence for use of prostheses, and in particular long-term outcome, is scarce.

A cohort of 71 patients (93 implants) was reviewed in 1997 having had a De la Caffinière prosthesis implanted between 1980 and 1989. The conclusions of the study included the findings that the replacement was generally well regarded by recipients, pain was improved and survivorship was comparable with data from the best hip replacements.

Ethical permission was obtained to review the same cohort ten years on (16 – 26 years post-op). Similar outcome measures were employed as in the original study but in addition formal grip strength measurements were taken, along with newer outcome scores including the DASH (Disability of arm, shoulder and hand) and EQ-5D (a European quality of life measure). Radiographs allowed assessment of radiological failure using the criteria from the original study.

We found a significant mortality rate in the interim period since the original review (27 patients, 36 implants). A further 8 implants in 8 patients had been removed and were not clinically reviewed as per patients’ wishes. However, 39 implants in 26 patients were available for follow up at a mean 19 years (SD 6.3) leaving a “lost to follow up” rate of 10 patients (10 implants). Survivorship at 26 years was 73.9% (95% CI 61.2, 86.6) with the end-point as revision. Our data also demonstrated continued patient satisfaction without pain, satisfactory power and thumb mobility.

Such information may be used to counsel future patients requiring surgery that there is a functional alternative to excision arthroplasty (trapeziectomy).

The treatment of complex intra-articular fractures involving the knee has always proved challenging. The goals are to achieve satisfactory reduction, bony union and good functional outcome. Studies have investigated the outcome of various forms of treatment, including internal fixation and primary knee arthroplasty. In recent years there have been advances in technology bringing about more sophisticated implants such as pre-contoured peri-articular locking plates. Similar advances have been made in the production of constrained knee arthroplasty prostheses with the introduction of the Rotating Hinge Knee (RHK).

The initial non-rotating hinged prostheses for total knee arthroplasty did not enjoy a good reputation. The cumulative survival rate has been quoted as 65% at 6 years, significantly lower than that of conventional stabilised prostheses. Therefore the use of such implants was restricted to complex primary or revision arthroplasty, and tumour surgery. Studies have been published advocating the use of hinged prostheses for distal femoral fractures in elderly patients. The average age in the most recent study was 82, of whom 42% had died within the first post-operative year.

This study is a case series of 16 patients with fractures who were treated with hinged knee replacements, a subgroup of whom were treated with RHK. Demographic and outcome data has been retrospectively collected. We discuss the indications, experiences and outcomes in the management of these patients. This study also stimulates debate about the use of RHK to treat fractures in a younger population.

Study design: A prospective comparison of MRI findings with surgical findings in patients presenting to our spinal triage service with a prospective diagnosis of a lumbar disc herniation.

Objective: To investigate consistency between radiologists interpretation of MRI scans, and comparison between MRI and surgical findings, in an attempt to identify those patients suitable for percutaneous treatment.

Background: MRI has assumed a preeminent position in the diagnosis of lumbar disc prolapse.

Methods: 87 consecutive patients presenting with signs and symptoms suggestive of a lumbar disc prolapse that underwent an MRI and based on that a discectomy.

Results: Reliability tests show only fair agreement (k=0.36) between the radiologists and at best only moderate agreement (k=0.41) between the radiologists and surgical findings.

Conclusions: MRI is an excellent tool for diagnosis of a disc prolapse but does not appear to help in classifying discs suitable for percutaneous treatment.

Study design: A prospective comparison of MRI findings with surgical findings in patients presenting to our spinal triage service with a prospective diagnosis of a lumbar disc herniation.

Objective: To investigate consistency between Radiologists’ interpretation of MRI scans, and comparison between MRI and surgical findings, in an attempt to identify those patients suitable for percutaneous treatment.

Background: MRI has assumed a pre-eminent position in the diagnosis of lumbar disc prolapse.

Methods: 87 consecutive patients presenting with signs and symptoms suggestive of a lumbar disc prolapse that underwent an MRI and based on that a discectomy.

Results Reliability tests show only fair agreement (k=0.36) between the Radiologists and at best only moderate agreement (=0.41) between the Radiologists and surgical findings.

Conclusion: MRI is an excellent tool for diagnosis of a disc prolapse. MRI is poor at defining the character of a disc prolapse, and does not appear to help in classifying discs suitable for percutaneous treatment.

Fracture healing involves many local and systemic regulatory factors. Progress in identifying signaling events downstream has been made with the discovery of a novel family of proteins, the Smad, as TGF-ß/activins/BMPs signal transducers. Smads are the vertebrate homologs of Mad (Mothers against decapentaplegic) gene from Drosophila and Sma genes from Caenorhabditis elegans. Smad-1, -2, -3, -5, -8 and -9 belong to the receptor-regulated class (R-Smad) which are activated by the TGF-ß type I and II receptors, forming heteromers with the common-mediator class (Co-Smad): Smad-4. Smad-6 and -7 (Anti-Smad) perform a negative regulatory or balancing role. Smad-2 and -3 regulate TGF-ß/activin effects, whilst Smad-1 and -5 work with BMPs. This study investigated the expression and localization of Smad proteins (Smad 1–6) and BMP-4 and -7 during fracture healing.

Eighteen 3-month old female CD-COB rats were used. A standard closed fracture was made in the mid-shaft of right femur using a 3-point bending device. The left limb served as the non-fracture control. The rats were divided into 3 groups (6 per group) and sacrificed at day 3, 10 and 28 after fracture. The femurs were harvested, fixed in buffered formalin for 48 hours and decalcified with 10% formic acid-formalin solution. The decalcified tissues were embedded in paraffin and 5μm sections were cut onto silane-coated slides. Representative slides from each block were stained with routine haematoxylin and eosin (H& E). Sections were cut for immunohistochemistry for protein marker expression by a standard procedure for Smads and BMP 4 and 7. Sections were viewed and analysed by colour video image analysis using a 40x objective, a 10x eyepiece, and a fixed frame of 128 × 128 pixels (49152.0 μm²). Ten fields per slide were examined.

Smad proteins (Smads 1, 4, and 6) were expressed during the early stages (day 3) of fracture healing by bone marrow stromal cells, osteoblasts, fibroblasts and chondrocytes located in the intramembranous and endochondral ossification regions around the fracture site. Differential expressions of individual Smads, particularly Smad 1 and Smad 6, at different time-points (Smad-1 was higher than Smad-6 at day 3, whilst Smad-6 was much higher than Smad-1 at day 10) suggest that Smad proteins are not simply BMP signal transducers. Smads may also be responsible for up- and/or down-regulation of transcriptional events during the intramembranous and endochondral ossification. Smad-4, a Co-SMAD, expression newly formed bone and cartilage suggests an additional function beyond the signal transduction in rat fracture healing. BMP-4 and BMP-7 were highly expressed at day 3 and 10. BMP-7 expression was greater than BMP-4 at day 3 but switched by day 10 (BMP-4 > BMP-7). Smads represent a new level where specific therapeutic strategies can be targeted considering the interactions with a number of BMPs.

Resorbable porous ceramics derived from chemically converted corals have been used successfully as bone graft substitutes for many years. Converted corals provide a 3D porous architecture that resembles cancellous bone with a pore diameter of 200–700 μm. The success of these corals as a bone graft substitute relies on vascular ingrowth, differentiation of osteoprogenitor cells, remodelling and graft resorption occurring together with host bone ingrowth into the porous microstructure or voids left behind during resorption. The resorption rate of the coral can be controlled by partial conversion to provide a hydroxyapatite (HA) layer via thermal modification. This study examined the resorption rates and bone formation of partially converted corals in a bilateral metaphyseal defect model.

Bilateral defects (5 mm x 15 mm) were created 3 mm below the joint line in the proximal tibia of 41 skeletally mature New Zealand white rabbits following ethical approval. Two variations of a calcium carbonate–HA coral (Pro Osteon 200 R, Interpore-Cross International, Irvine, CA) were examined with different HA thickness (200R; 14% or 200 RT; 28%). Empty defects (negative control) or defects filled with morcellised bone autograft from the defect sites (positive control) were performed. The tibiae were harvested at 6, 12, 24, 36 or 52 weeks, radiographed (standard x-rays and faxitron) in the anteroposterior and lateral planes. Tibias were processed for torsional testing and quantitative histomorphometry using back scattering scanning electron microscopy. Four additional rabbits were killed at time zero to determine the mechanical properties of the intact tibia (n=6 tibias) and 2 for tibias for time zero histomorphometry. Data were analysed using a 3-way analysis of variance.

No clinical complications were encountered in this study. Radiographic assessment revealed a progression in healing, implant resorption and bone infiltration. Cortical closure in the 200 R and 200RT treated defects was noted by 24 weeks. All specimens failed in torsional testing with a spiral fracture initiating at the distal defect site and extending into the distal diaphysis. Torsional properties reached intact control tibia levels by 24 weeks in both groups. No significant differences were noted between 200 R and 200 RT based on torsional data. SEM revealed progressive resorption of the calcium carbonate core of the 200 R and 200 RT with time, infiltration of bone and ingrowth to the HA layers. Time and measurement site (cortical versus cancellous) were significant for implant resorption, bone, and void. The thinner HA layer (200 R) resorbed more quickly compared to the thicker layer (200 RT) in the canal as well as cortical sites. Increased bone and decreased void were noted at the cortex measurement sites in the 200 R group at 24 weeks and in the 200 RT group at 12 and 24 weeks (p< 0.05). Implants were nearly completely resorbed by 52 weeks with only a few percent of implant remaining.

Clinical implantation represents the ultimate experiment of any component and often demonstrates areas of strengths and weaknesses not predicted from in vitro testing. Mobile bearing knees incorporate an additional articulating interface between the flat distal PE insert and a highly polished metal tibial tray. This can allow the proximal interface to retain high conformity whilst leading to reduced stresses at the bone – prosthesis interface by permitting complex distal interface compensatory motion to occur (rotation and/or translation). Retrieval reports on many of the new generation of mobile bearing implants remains scarce. This study presented a retrieval analysis of 9 mobile bearing inserts that had be in situ for less than 24 months.

Nine cemented mobile bearing implants (6 AP Glide, 1 LCS, 1 MBK and 1TRAK) were received into our Implant Retrieval Program. The femoral component, tibial tray and PE insert were macroscopically examined under a stereo-zoom microscope for evidence of damage. The PE inserts were graded for wear based on optical and SEM assessments. The proximal and distal surfaces of the PE inserts were subsequently assessed for surface roughness following ISO 97 (Ra and Rp) using a Surfanalyzer 5400 (Federal Products, Providence, RI). Virgin, unused PE inserts were analysed and served as a comparison to the retrieved implants.

Time in situ time for these implants ranged from 6 months to 24 months (mean 18.6). The implants were revised for instability and pain (AP glide) or dislocation (TRAK). Damage to the femoral components, in general, was minimal with some evidence of a transfer film of PE. The proximal surface of the tibial trays presented evidence of PE transfer as well as some scratches but in general were intact. The proximal PE and distal PE articulating surfaces demonstrated significant areas of damage due to third body wear which was identified on EDAX to be PMMA. Areas of burnishing were also present at the proximal and distal interface. The damage, in part, correlated with the complex kinematics of each design.

Introduction: Unicomparmental knee replacements have a long clinical history of success as well as failure. Recently, in Australia some 40% of knee surgery performed consists of unicompartmental knees for the treatment of medial compartment OA. This increased use of unicompartmental knees is in part due to advances in surgical technique through a minimally invasive approach. Loading conditions at the tibia-implant interface will play an important role in the stress/strain distributions at the proximal tibia. The use of an all PE tibial insert versus a metal backed component may provide a different strain disribution to the proximal tibia. This study examined the influence of metal backed and polyethylene tibial components in unicompartmental knee replacements with and without cement fixation on the initial strain distributions under various loading conditions.

Materials and Methods: Three cadaveric tibias (mean age 47 years old) were cleaned of all soft tissue and strain gauged. Rosette strain gauges (TML Ltd., Tokyo, Japan) were placed at 2 levels on the tibial cortex. The intact tibia were embedded in a low melting point alloy at a standard height and tested using an MTS 858 Bionix testing machine (MTS Systems, Min., MI). The tibia were tested in nuetral, varus and valgus positions at zero and sixty degrees of flexion. A 1500N was applied for 15 seconds and the strains measured. A K-Scan sensor (Tekscan, Boston, MA) was used to confirm the varus and valgus loading positions and to obtain a contact footprint and pressure for the intact and reconstructed tibias under the loading conditions (Fig. 1). Following intact testing, the tibias were templated and reconstructed by a surgeon familiar with the technigue. The implants were investigated with and without cement fixation and compared to their respective all polyethylene component if it was available using the same loading regime as the intact tibias. Principal strains were calculated.

Results: Tibial cortical strain distributions were significantly different at the proximal and distal sites under the loading conditions examined. The strain distribution for metal backed components was greater than the all PE design. Increasing flexion angle shifted the peak strains posteriorly. Metal backing and all PE tibial inserts presented different strain distributions on the medial side under nuetral and varus loading. Lateral compartment strains did not differ between designs, were higher proximal and decreased dramatically at the distal gauges. Cementless fixation tended to overload compared to the intact condition. Figure 2 presents the strain distribution for a typical metal backed and all poly unicompartmental knee in the nuetral position.

Discussion: Metal backed unicompartmental components overloaded the proximal cortex of the tibia. All polyethylene tibial inserts did not overload the proximal cortex and had similar strain distribution to the intact tibia. Cemented fixation allows the transfer of load to the distal tibial cortex via the proximal cortex and subchondral bone, provided that the bone cement has inter-digitised the subchondral bone.

We report the contamination rate in the Cambridge bone bank of 35 consecutive allograft specimens, all harvested in a clean-air environment, using a strict aseptic technique and antibiotic cover. Five of 27 femoral heads taken from living donors and three of eight massive allografts taken from cadavers were found to be contaminated. The contaminated femoral heads were discarded. All massive allografts were rendered sterile by gamma-irradiation. It is important to exclude bacteriological contamination of harvested and banked bone.