The dual-mobility cup seems to bring more stability without changing the gait pattern. Dislocations and instability are among the worst complications after THA in elderly patient. Dual mobility cups seem to lower these risks. To our knowledge no study performed a gait analysis of dual cup in this group.Summary Statment
Introduction
Mobile-bearing knee prostheses have been designed in order to provide less constrained knee kinematics compared to fixed-bearing prosthesis. Currently, there is no evidence to confirm the superiority of either of the two implants with regard to walking performances. It has been shown that subjective outcome scores correlate poorly with real walking performance and it has been recommended to obtain an additional assessment of walking ability with objective gait analysis. We assessed recovery after total knee arthroplasty (TKA) with mobile- and fixed-bearing between patients during the first postoperative year, and at 5 years follow-up, using a new objective method to measure gait parameters in real life conditions.INTRODUCTION
OBJECTIVES
This study compared the outcome of total knee
replacement (TKR) in adult patients with fixed- and mobile-bearing prostheses
during the first post-operative year and at five years’ follow-up,
using gait parameters as a new objective measure. This double-blind
randomised controlled clinical trial included 55 patients with mobile-bearing (n
= 26) and fixed-bearing (n = 29) prostheses of the same design,
evaluated pre-operatively and post-operatively at six weeks, three
months, six months, one year and five years. Each participant undertook
two walking trials of 30 m and completed the EuroQol questionnaire,
Western Ontario and McMaster Universities osteoarthritis index,
Knee Society score, and visual analogue scales for pain and stiffness.
Gait analysis was performed using five miniature angular rate sensors
mounted on the trunk (sacrum), each thigh and calf. The study population
was divided into two groups according to age (≤ 70 years Improvements in most gait parameters at five years’ follow-up
were greater for fixed-bearing TKRs in older patients (>
70 years),
and greater for mobile-bearing TKRs in younger patients (≤ 70 years).
These findings should be confirmed by an extended age controlled
study, as the ideal choice of prosthesis might depend on the age
of the patient at the time of surgery.
In many fields, such as orthopedics and rehabilitation, measurement of segment orientation or three-dimensional (3D) joint rotation is highly required. However, even if laboratory systems (e.g., optical-based tracker) are enough accurate for human movement measurement, they have some limitations (e.g., cost, complexity, capture volume) that exclude their uses in routine practice. Recently, our group proposed an original system fusing a low level magnetic tracker (Minuteman®, Polhemus, USA) and 3D gyroscopes (Physilog®, BioAGM, CH) to measure segments orientation. These complementary devices were selected with the aim to provide real time orientation in clinical environment and without restriction on the acquisition duration. The objective of the present study was to assess the performances of this new system in routine clinical applications. For this evaluation, five healthy young men were enrolled and the orientation of their left thigh was considered. They were asked to perform two times a long scenario (14 min) which included various postures (standing, sitting and lying) and activities (e.g., walking and stairs climbing). These activities were realized both, in the vicinity and far from the magnetic source. Additionally, different metallic objects were inserted and moved in the capture volume to simulate assisted clinical applications. An optical motion capture system (VICON®, UK) was used as reference. In the absence of magnetic distortion and independently of the activity, we obtained a RMS orientation error of 1.2°. Generally, during distortion periods we obtained a slow growing orientation error of about 0.1°/s whatever the activity. In conclusion, the proposed system provided an accurate and real-time measurement of orientation in a large capture volume over a long duration. Furthermore the system performances were tested in an environment including representative distortions of routine clinical uses. In combination with a functional calibration, this system was very promising for routine measurements of 3D joint rotations.
Recently, many mathematical descriptors were proposed to quantify 3D motions of the foot and ankle complex. However, since the ranges of rotation in foot joints are rather small, the reliability of these kinematic assessments is questionable. Particularly, achievement of acceptable results for clinical decision makings demands to extract repeatable features. In this study, repeatability of kinematics assessment of multi-segment foot by means of different mathematical descriptors was investigated. 25 tiny markers were mounted on dominant anatomical landmarks of the foot and ankle complex. Six young healthy subjects were asked to walk over a forceplate surrounded by six infra-red cameras. Marker trajectories were captured during one stance phase and several trials per subject were recorded. Foot and ankle complex was considered as six rigid segments:
Shank, Hindfoot, Mid-foot, Medial forefoot Lateral forefoot Toes. 3D angles between each pair of segments (i.e., 1~2, 2~3, 3~4, 3~5 and 4~6) were calculated based on three common mathematical descriptors:
helical angle, joint coordinate system and projection angles. Then, the coefficient of multiple correlations (CMC) was used to estimate the degree of similarity among joint angle patterns for intra-subject and inter-subjects trials. It was observed that the three angle calculation methods had comparable repeatability for both intra-subject and inter-subjects kinematics. No significant difference among their repeatability was noticed. Most of angles showed good pattern repeatability intra-subject and acceptable pattern repeatability inter-subjects. In conclusion, all three calculation methods for foot joint angles can be reliably applied. Further studies enrolling patients with foot and ankle pathology are necessary to investigate the relevance of these measurements for clinical evaluations.
The FIRST knee prosthesis (Free Insert in Rotation Stabilized in Translation, Symbios SA) is a new ultra congruent, postero-stabilized total knee arthroplasty (TKA) with a mobile bearing expected to reduce significantly polyethylene wear, to improve the range of motion and the overall stability of the knee while ensuring a physiological ligament balance. We compared subjective and really objective results of this new TKA with two other widespread models of TKA. A clinical prospective monocentric cohort study of 100 consecutive patients (47–88 yrs) undergoing a FIRST TKA for primary osteoarthritis is currently being done. Pre- and post-operative follow-ups (6 weeks, 4,5 months and 1 year) are done with well-recognized subjective evaluations (EQ-5D and WOMAC scores) and semi-objective questionnaires (KSS score and radiography evaluation) as well as with a really objective evaluation using gait parameters from 6 walking trials, performed at different speeds with an ambulatory in field gait analysis system (Physilog®, BioAGM CH). The outcomes after one year of follow-up of 32 FIRST TKA are compared to 29 NexGen® postero-stabilized TKA (Zimmer Inc) with a fixed bearing and to 26 NexGen® TKA with a mobile bearing using the same methods. The gait cycle time of the FIRST TKA was statistically significantly shorter at normal speed of walk, as well as double-support periods, as compared to both standard models. The normal walking speed was significantly higher with faster swing speed and stride lengths for the new TKA. Significantly better coordination scores were observed at normal walking speed for the FIRST TKA as compared to the fixed-bearing TKAs. The FIRST TKA showed statistically significantly better really objective outcomes in terms of gait after one year of follow-up and similar subjective and semi-objective evaluations compared to two widespread TKA designs.
Two modules with 3 miniature capacitive gyroscopes and 3 miniature accelerometers were fixed by a patch on the dorsal side of the distal humerus, and one module with 3 gyroscopes and 3 accelerometers were fixed on the thorax. The subject wore the system during one day (8 hours), at home or wherever he/she went. We used a technique based on the 3D acceleration and the 3D angular velocities from the modules attached on the humerus.
Ten patients were studied using an ambulatory gait device (Physilog®). Each participant was asked to perform two walking trials of 30m long at 3 different speeds and to complete an EQ-5D questionnaire, a WOMAC and Knee Society Score. Lower limbs rotations were measured by four miniature angular rate sensors mounted respectively, on each shank and thigh. The outcomes of the eight patients undergoing total knee arthroplasty, recorded pre-operatively and post-operatively at 6 weeks, 3 months, 6 months and 1 year were compared to 2 age-matched healthy subjects.
This randomized controlled double-blind study included to date 14 patients: the gait signatures of four patients with mobile-bearing were compared to the gait signatures of nine patients with fixed-bearing pre-operatively and post-operatively at 6 weeks, 3 months and 6 months. Each participant was asked to perform two walking trials of 30m long at his/her preferred speed and to complete a EQ-5D questionnaire, a WOMAC and Knee Society Score (KSS). Lower limbs rotations were measured by four miniature angular rate sensors mounted respectively, on each shank and thigh. A new method for a portable system for gait analysis has been developed with very encouraging results regarding the objective outcome of total knee arthroplasty using mobile- and fixed-bearings.
The choice of the ideal outcome measure to assess total joint replacement remains a complex issue. However, gait analysis provides objective and quantifying evidences of treatment evaluation. Significant methodological advances are currently made in gait analysis laboratories and ambulatory gait devices are now available. The goal of this study was to provide gait parameters as a new objective method to assess total knee arthroplasty outcome between patients with fixed- and mobile-bearing, using an ambulatory device with minimal sensor configuration.