The primary aim was to assess the reliability of ultrasound in the assessment of humeral shaft fracture healing. The secondary aim was to estimate the accuracy of ultrasound assessment in predicting humeral shaft nonunion. Twelve patients (mean age 54yrs [20–81], 58% [n=7/12] female) with a non-operatively managed humeral diaphyseal fracture were prospectively recruited and underwent ultrasound scanning at six and 12wks post-injury. Scans were reviewed by seven blinded observers to evaluate the presence of sonographic callus. Intra- and inter-observer reliability were determined using the weighted kappa and intraclass correlation coefficient (ICC). Accuracy of ultrasound assessment in nonunion prediction was estimated by comparing scans for patients that united (n=10/12) with those that developed a nonunion (n=2/12). At both six and 12wks, sonographic callus was present in 11 patients (10 united, one developed a nonunion) and sonographic bridging callus (SBC) was present in seven patients (all united). Ultrasound assessment demonstrated substantial intra- (6wk kappa 0.75, 95% CI 0.47-1.03; 12wk kappa 0.75, 95% CI 0.46-1.04) and inter-observer reliability (6wk ICC 0.60, 95% CI 0.38-0.83; 12wk ICC 0.76, 95% CI 0.58-0.91). Absence of sonographic callus demonstrated a sensitivity of 50%, specificity 100%, positive predictive value (PPV) 100% and negative predictive value (NPV) 91% in nonunion prediction (accuracy 92%). Absence of SBC demonstrated a sensitivity of 100%, specificity 70%, PPV 40% and NPV 100% (accuracy 75%). Of three patients at risk of nonunion based on reduced radiographic callus formation (Radiographic Union Score for HUmeral fractures <8), one had SBC on 6wk ultrasound (and united) and the other two had non-bridging or absent sonographic callus (both developed a nonunion). Ultrasound assessment of humeral shaft fracture healing was reliable and predictive of nonunion, and may be a useful tool in defining the risk of nonunion among patients with reduced radiographic callus formation

Though retear rates following rotator cuff repair are well established, we set out to review current literature to determine when early retears occurred (defined as <12m following surgery), and examine which pre- and post-operative variables might affect outcome. Pubmed, Medline, and CINAHL were searched for literature published from 2011 to 2021 using specific search terms. The inclusion criteria were studies reporting retear rates within 12 months of initial surgical repair. Exclusionary criteria were studies that included partial thickness tears, and studies that did not use imaging modalities within 12 months to assess for retears. PRISMA guidelines were followed, identifying a total of 10 papers. A combined total of 3372 shoulders included (Mean age 56 −67 years). The most common modality used to identify early retears were ultrasound scan and MRI. 6 of the 10 studies completed imaging at 0-3 months, 6 studies imaged at 3-6 months and 6 studies imaged at 6-12 months. Across all studies, there was a 17% early retear rate (574 patients). Of these, 13% occurred by 3 months, whilst the peak for retears occurred at 3-6 months (82%) and 5% occurred at 6-12 months. The risk of retear was higher in larger tears and extensive tendon degeneration. All studies apart from one documented a return to work/sport at 6 months post-operatively. Postoperative rehabilitation does not appear to alter retear rate, although data is limited with only 1 of 10 studies allowing active range of movement before 6 weeks. Retorn tendons had poorer functional outcomes compared to intact tendons at 12m following initial repair. The majority of early retears occur at 3-6 months and this time period should be prioritised both in rehabilitation protocols and future research. Age, tear size, and tendon degeneration were found to influence likelihood of early retears

Abstract. Objectives. Three-dimensional visualisation of sonographic callus has the potential to improve the accuracy and accessibility of ultrasound evaluation of fracture healing. The aim of this study was to establish a reliable method for producing three-dimensional reconstruction of sonographic callus. Methods. A prospective cohort of ten patients with a closed tibial shaft fracture managed with intramedullary nailing were recruited and underwent ultrasound scanning at 2-, 6- and 12-weeks post-surgery. Ultrasound B-mode capture was performed using infrared tracking technology to map each image to a three-dimensional lattice. Using echo intensity, semi-automated mapping was performed by two independent reviewers to produce an anatomic three-dimensional representation of the fracture. Agreement on the presence of sonographic bridging callus on three-dimensional reconstructions was assessed using the kappa coefficient. Results. Nine of the ten patients achieved union at six months. At six weeks, seven patients had bridging callus at ≥1 cortex on the three-dimensional reconstruction; when present all united. Compared to radiographs, no bridging callus was present in any patient. Of the three patients lacking sonographic bridging callus, one went onto a nonunion (77.8%-sensitive and 100%-specific to predict union). At twelve weeks, nine patients had bridging callus at ≥1 cortex on three-dimensional reconstruction and all united (100%-sensitive and 100%-specific to predict union). Compared to radiographs, seven of the nine patients that united had bridging callus. Three-dimensional reconstruction of the anteromedial and anterolateral tibial surface was achieved in all patients, and detection of sonographic bridging callus on the three-dimensional reconstruction demonstrated substantial inter-observer agreement (kappa=0.78, 95% confidence interval 0.29–1.0, p=0.011). Conclusions. Three-dimensional fracture reconstruction can be created using multiple ultrasound images in order to evaluate the presence of bridging callus. This imaging modality has the potential to identify impaired healing at an early stage in fracture management. Declaration of Interest. (b) declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research reported:I declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research project

Since the establishment of our department a multi-modal approach to thromboprophylaxis that uses aspirin for chemical prophylaxis was adopted. In accordance with the latest national recommendations, our routine chemical prophylaxis following arthroplasty was changed to rivaroxaban in 2012 and then dalteparin in 2013. This study aimed to compare venous thromboembolism (VTE) rates during the use of the aspirin-based protocol used from 2004 to 2011 with recent, rivaroxaban and dalteparin-based guidelines. Outcome data from ISD Scotland was retrieved and radiology reports performed for CT pulmonary angiograms and lower limb doppler ultrasound scans in our institution were assessed to identify cases of VTE following primary hip or knee arthroplasty. The incidence of pulmonary embolism (PE) and proximal deep venous thrombosis (DVT) was calculated for each year and compared using a Chi-squared test. Additionally, the change in extended thromboprophylaxis regimen was surveyed by recording the discharge prescriptions for consecutive arthroplasty patients for March every year. There were 90 radiologically confirmed cases of DVT or PE between 2004 and 2011 (incidence of 0.71%). The DVT/PE rate was subsequently 0.67% in 2012 and 0.69% in 2013, with a further 29 cases identified. This does not represent a significant change in the venous thromboembolism rates and remains below the national incidence of VTE (1.06%). Aspirin alone was used as chemical thromboprophylaxis in 80.8% of patients from 2004 to 2011, 50.9% in 2012, and 12.1% in 2013. The incidence of VTE at our centre remains favourable to national figures, but the modification of thromboprophylaxis guidelines will incur additional financial costs and has not had a significant reduction on the rate of VTE

Image-free navigation technology relies heavily on the surgeon carefully registering bony anatomical landmarks, a critical step in achieving accurate registration which affects the entire procedure. Currently this step may depend on placing a pointer superficially, with soft-tissue and skin obscuring these bony landmarks. We report initial results of using newly developed experimental software which automatically recognises the bone soft-tissue interface. This is the first critical step in development of automatic computer generation of the bone surface topography from ultrasound scanning. Individual 2D ultrasound images (n=651) of the anterior femoral condyles and trochlear notch were used. Images were taken from 29 volunteers (20 male, 9 female). The software extracted bone-soft tissue interface by a two-step method based on a gradient evaluation and the elimination of false-positives with a graph closure. The trochlear notch was automatically defined by geometrical modelisation. Coordinates of both bone interface and trochlear notch position for each separate image were compared to a separate analysis performed manually by a single investigator. Error was calculated using root mean squared (RMS). Median error (RMS) in locating bone soft-tissue interface was 0.67 mm, (mean 0.93 mm, SD 0.84 mm). Median error for trochlear notch topography was 1.01mm, (mean 1.41 mm, SD 1.37 mm). Bone soft-tissue interface can be accurately defined and displayed by this software. Direct visualisation of critical bony landmarks could replace the current comparatively subjective placement of a pointer on superficial tissues. This has powerful application in both non-invasive and surgical computer-assisted acquisition of knee kinematics, and may have further applications in orthopaedic surgery

This protocol describes a pragmatic multicentre randomised controlled trial (RCT) to assess the clinical and cost effectiveness of arthroscopic and open surgery in the management of rotator cuff tears. This trial began in 2007 and was modified in 2010, with the removal of a non-operative arm due to high rates of early crossover to surgery.

Cite this article: Bone Joint Res 2014;3:155–60.

The aim of this randomised, controlled in vivo study in an ovine model was to investigate the effect of cylic pneumatic pressure on fracture healing. We performed a transverse osteotomy of the right radius in 37 sheep. They were randomised to a control group or a treatment group where they received cyclic loading of the osteotomy by the application of a pressure cuff around the muscles of the proximal forelimb. Sheep from both groups were killed at four or six weeks. Radiography, ultrasonography, biomechanical testing and histomorphometry were used to assess the differences between the groups. The area of periosteal callus, peak torsional strength, fracture stiffness, energy absorbed over the first 10° of torsion and histomorphometric analysis all showed that the osteotomies treated with the cyclic pneumatic pressure at four weeks were not significantly different from the control osteotomies at six weeks.