Distal radius fractures (DRFs) are common injuries that represent 17% of all adult upper extremity fractures. Some fractures deemed appropriate for nonsurgical management following closed reduction and casting exhibit delayed secondary displacement (greater than two weeks from injury) and require late surgical intervention. This can lead to delayed rehabilitation and functional outcomes. This study aimed to determine which demographic and radiographic features can be used to predict delayed fracture displacement. This is a multicentre retrospective case-control study using radiographs extracted from our Analytics Data Integration, Measurement and Reporting (DIMR) database, using diagnostic and therapeutic codes. Skeletally mature patients aged 18 years of age or older with an isolated DRF treated with surgical intervention between two and four weeks from initial injury, with two or more follow-up visits prior to surgical intervention, were included. Exclusion criteria were patients with multiple injuries, surgical treatment with fewer than two clinical assessments prior to surgical treatment, or surgical treatment within two weeks of injury. The proportion of patients with delayed fracture displacement requiring surgical treatment will be reported as a percentage of all identified DRFs within the study period. A multivariable conditional logistic regression analysis was used to assess case-control comparisons, in order to determine the parameters that are mostly likely to predict delayed fracture displacement leading to surgical management. Intra- and inter-rater reliability for each radiographic parameter will also be calculated. A total of 84 age- and sex-matched pairs were identified (n=168) over a 5-year period, with 87% being female and a mean age of 48.9 (SD=14.5) years. Variables assessed in the model included pre-reduction and post-reduction radial height, radial inclination, radial tilt, volar cortical displacement, injury classification, intra-articular step or gap, ulnar variance, radiocarpal alignment, and cast index, as well as the difference between pre- and post-reduction parameters. Decreased pre-reduction radial inclination (Odds Ratio [OR] = 0.54; Confidence Interval [CI] = 0.43 – 0.64) and increased pre-reduction volar cortical displacement (OR = 1.31; CI = 1.10 – 1.60) were significant predictors of delayed fracture displacement beyond a minimum of 2-week follow-up. Similarly, an increased difference between pre-reduction and immediate post reduction radial height (OR = 1.67; CI = 1.31 – 2.18) and ulnar variance (OR = 1.48; CI = 1.24 – 1.81) were also significant predictors of delayed fracture displacement. Cast immobilization is not without risks and delayed surgical treatment can result in a prolong recovery. Therefore, if reliable and reproducible radiographic parameters can be identified that predict delayed fracture displacement, this information will aid in earlier identification of patients with DRFs at risk of late displacement. This could lead to earlier, appropriate surgical management, rehabilitation, and return to work and function

Essex-Lopresti injuries are often unrecognized acutely with resulting debilitating adverse effects. Persistent axial forearm instability may affect load transmission at both the elbow and wrist, resulting in significant pain. In the setting of both acute and chronic injuries metallic radial head arthroplasty has been advocated, however there is little information regarding their outcome. The purpose of this study was to assess the efficacy of a radial head arthroplasty to address both acute and chronic Essex-Lopresti type injuries. A retrospective review from 2006 to 2016 identified 11 Essex-Lopresti type injuries at a mean follow-up of 18 months. Five were diagnosed and treated acutely at a mean of 11 days (range, 8 to 19 days) from injury, while 6 were treated in a delayed fashion at a mean of 1.9 years (range, 2.7 months to 6.2 years) from injury with a mean 1.5 (range, 0 to 4) prior procedures. The cohort included 10 males with a mean age was 44.5 years (range, 28 to 71 years). A smooth stem, modular radial head arthroplasty was used in all cases. Outcomes included range of motion and radiographic findings such as ulnar variance, capitellar erosion, implant positioning and implant lucency using a modification of the method described by Gruen. Reoperations, including the need for ulnar shortening osteotomy, were also recorded. Three patients in each group (55%) reported persistent wrist pain. The mean ulnar variance improved from +5 mm (range, 1.8 to 7 mm) to +3.7 mm (range, 1 to 6.3 mm) at the time of final follow-up or prior to reoperation. Three (50%) patients in the chronic group underwent a staged ulnar shortening osteotomy (USO) to correct residual ulnar positive variance and to manage residual wrist pain. There were no reoperations in the acute group. Following USO, the ulnar variance in those three cases improved further to +3.5, +2.1, and −1.1 mm. No radial head prostheses required removal. Capitellar erosion was noted in five (45%) elbows, and was rated severe in one, moderate in two, and mild in two. Lucency about the radial head prosthesis stem was noted in eight (73%) cases, and rated as severe in 2 (18%), based on Gruen zones. Treatment of acute and chronic Essex-Lopresti lesions with radial head arthroplasty often results in persistent wrist pain. In the chronic setting, a planned USO was often necessary to restore axial forearm stability after radial head arthroplasty. Essex-Lopresti lesions represent a rare clinical entity that are difficult treat, particularly in the chronic setting. Early recognition and management with a smooth stem modular radial head arthroplasty may provide improved outcomes compared to chronic reconstruction

Ulnocarpal impaction (UCI) is a common cause of ulnar-sided wrist pain. UCI typically occurs in wrists with positive ulnar variance, which causes altered loading mechanics between the ulnar head, lunate and triquetrum. However, many individuals with positive ulnar variance never develop UCI, and some with neutral or negative ulnar variance do experience UCI. This suggests that other variables contribute to the development of UCI. Suspected culprits include lunate morphology, and dynamic changes with loaded (grip) pronation. If these anatomic variations are contributing to UCI, we expect them to influence functional impairment scores. Therefore, the objective of this study was to evaluate the relationship between radiographic parameters and pre-surgical upper extremity patient-rated outcomes scores (PROS) in patients with a diagnosis of UCI. Retrospective cohort study of patients undergoing ulnar shortening osteotomy or arthroscopic wafer procedure for UCI. Data derived from prospectively collected departmental database that captured demographic, clinical, functional and radiographic information. Radiographic parameters evaluated were: lunate morphology [presence vs. absence of hamate facet; Antuna-Zapico (A-Z) classification], and dynamic changes on grip view [difference in lunate-ulnar head distance (LUD); difference in lunate uncovering index (LUI)]. PROS assessed were QuickDASH and Patient-Rated Wrist Evaluation (PRWE) scores, collected at patient enrolment. ANOVA was used to assess for differences in PROS between A-Z classification groups. Student's t-test was used to assess for differences in PROS based on presence/absence of a hamate facet. Regression analysis evaluated a relationship between change in LUD with grip and PROS, and change in LUI with grip and PROS. Preliminary analysis included 23 wrists, with a mean patient age of 48.9 years [standard deviation (SD) 14.5 years]. Forty-eight percent were male, and the dominant limb was involved in 52.2% of cases. Average QuickDASH and PRWE scores at enrolment were 50.9 (SD 22.2) and 62.2 (SD 22.0), respectively. Assessment of radiographs revealed 17 patients (73.9%) without a hamate facet. Five patients (21.7%) had A-Z Type I lunate morphology, and nine (39.1%) had Type II and Type III morphology, respectively. ANOVA revealed no differences in enrolment QuickDASH (p = 0.185) or PRWE (p = 0.256) scores between A-Z classification groups. Similarly, Student's t-test found no difference based on presence/absence of a hamate facet (QuickDASH p = 0.594; PRWE p = 0.573). Regression analysis revealed no relationship between change in LUD with grip and PROS (QuickDash R2 = 0.020, p = 0.619; PRWE R2 = 0.009, p = 0.733), and no relationship between change in LUI with grip and PROS (QuickDash R2 = 0.000, p = 0.913; PRWE R2 = 0.010, p = 0.722). Preliminary results suggest no relationship between A-Z classification lunate morphology, presence/absence of a hamate facet, change in LUD, or change in LUI and pre-surgical PROS. It is unclear if our findings represent the true relationship between these radiographic parameters and PROS, or reflect our preliminary sample size. Data analysis is ongoing to add clarity to this question

Distal radius fractures are among the most common fractures seen in the emergency department. Closed reduction can provide definitive management when acceptable radiographic parameters are met. Repeated attempts of closed reduction are often performed to improve the alignment and avoid operative management. However, multiple reduction attempts may worsen dorsal comminution and lead to eventual loss of reduction, resulting in no demonstrable benefit. We hypothesize that compared to one closed reduction attempt, repeated closed reduction of extra-articular, dorsally angulated, displaced distal radius fractures has a low success rate in the prevention of operative fixation and improvement of radiographic parameters. Initial and post reduction radiographs for all distal radius fractures managed at Vancouver General Hospital between 2015 and 2018 were reviewed. Inclusion criteria were based on the AO fracture classification and included types 23-A2.1, 23-A2.2 and 23-A3. Exclusion criteria included age less than 18, intra-articular involvement with more than two millimeters of displacement, volar or dorsal Barton fractures, fracture-dislocations, open fractures and volar angulation of the distal segment. Distal radius fractures that met study criteria and underwent two or more attempts of closed reduction were matched by age and gender with fractures that underwent one closed reduction. Radiographic parameters including radial height and inclination, ulnar variance and volar tilt were compared between groups. Sixty-eight distal radius fractures that met study criteria and underwent multiple closed reduction attempts were identified. A repeated closed reduction initially improved the radial height (p = 0.03) and volar tilt (p < 0.001). However, by six to eight weeks the improvement in radial height had been lost (p = 0.001). Comparison of radiographic parameters between the single reduction and multiple reduction groups revealed no difference in any of the radiographic parameters at one week of follow up. By six to eight weeks, the single reduction group had greater radial height (p = 0.01) ulnar variance (p = 0.05) and volar tilt (p = 0.02) compared to the multiple reduction group. With respect to definitive management, 38% of patients who underwent a repeated closed reduction subsequently received surgery, compared to 13% in the single reduction group (p = 0.001). Repeated closed reduction of extra-articular, dorsally angulated, displaced distal radius fractures did not improve alignment compared to a single closed reduction and was associated with increased frequency of surgical fixation. The benefit of repeating a closed reduction should be carefully considered when managing distal radius fractures of this nature

Distal radius fractures are among the most common fractures seen in the emergency department. Closed reduction can provide definitive management when acceptable radiographic parameters are met. Repeated attempts of closed reduction are often performed to improve the alignment and avoid operative management. However, multiple reduction attempts may worsen dorsal comminution and lead to eventual loss of reduction, resulting in no demonstrable benefit. We hypothesize that compared to one closed reduction attempt, repeated closed reduction of extra-articular, dorsally angulated, displaced distal radius fractures has a low success rate in the prevention of operative fixation and improvement of radiographic parameters. Initial and post reduction radiographs for all distal radius fractures managed at Vancouver General Hospital between 2015 and 2018 were reviewed. Inclusion criteria were based on the AO fracture classification and included types 23-A2.1, 23-A2.2 and 23-A3. Exclusion criteria included age less than 18, intra-articular involvement with more than two millimeters of displacement, volar or dorsal Barton fractures, fracture-dislocations, open fractures and volar angulation of the distal segment. Distal radius fractures that met study criteria and underwent two or more attempts of closed reduction were matched by age and gender with fractures that underwent one closed reduction. Radiographic parameters including radial height and inclination, ulnar variance and volar tilt were compared between groups. Sixty-eight distal radius fractures that met study criteria and underwent multiple closed reduction attempts were identified. A repeated closed reduction initially improved the radial height (p = 0.03) and volar tilt (p < 0.001). However, by six to eight weeks the improvement in radial height had been lost (p = 0.001). Comparison of radiographic parameters between the single reduction and multiple reduction groups revealed no difference in any of the radiographic parameters at one week of follow up. By six to eight weeks, the single reduction group had greater radial height (p = 0.01) ulnar variance (p = 0.05) and volar tilt (p = 0.02) compared to the multiple reduction group. With respect to definitive management, 38% of patients who underwent a repeated closed reduction subsequently received surgery, compared to 13% in the single reduction group (p = 0.001). Repeated closed reduction of extra-articular, dorsally angulated, displaced distal radius fractures did not improve alignment compared to a single closed reduction and was associated with increased frequency of surgical fixation. The benefit of repeating a closed reduction should be carefully considered when managing distal radius fractures of this nature

Ulnar shortening osteotomy (USO) is a procedure performed to alleviate ulnar sided wrist pain caused by ulnar impaction syndrome (UIS) and/or triangular fibrocartilage complex (TFCC) injury. Presently, non-union rates for ulnar shortening osteotomy is quoted to be 0–18% in the literature. However, there is a dearth of literature on the effect of site of osteotomy and plate placement on the rate of complications like a delayed union, symptomatic hardware and need for second surgery for hardware removal. In this study, we performed a multi-centered institutional review of ulnar shortening osteotomies performed, focusing on plate placement (volar vs. dorsal) and osteotomy site (distal vs. proximal) and determining if it plays a role in reducing complications. This study was a multi-centered retrospective chart review. All radiographs and charts for patients that have received USO for UIS or TFCC injury between 2013 and 2017 from hand and wrist fellowship-trained surgeons in Calgary, Alberta and Winnipeg, Manitoba were examined. Basic patient demographics including age, sex, past medical history, and smoking history were recorded. Postoperative complications such as delayed union, non-union, infection, chronic regional pain syndrome, hardware irritation requiring removal were evaluated with a two-year follow-up period. Osteotomy sites were analyzed based on the location in relation to the entire length of the ulna on forearm radiographs. Surgical techniques including volar vs. dorsal plating, oblique vs. transverse osteotomy cuts, and plate type were documented. Continuous variables of interest were summarized as mean or medians with standard deviation or inter-quartile range as appropriate. Differences in baseline characteristics were determined by t-test or one-way ANOVA for continuous variables and chi-square or Fischer exact test for dichotomous variables. All analyses were conducted using SPSS V24.0 (Chicago, IL, USA). All statistical tests were considered significant if p < 0.05. Between 2013–2017 there were 117 ulnar shortening osteotomies performed. The average age of patients was 46.2 ± 16.2, with 62.4% being female. The mean pre-operative ulnar variance was +3.89 ± 2.17 mm and post-operative ulnar variance was −1.90 ± 1.80 mm. 84.6% of the plates were placed on the volar aspect of the ulna and 14.5% were placed on the dorsal aspect. An oblique osteotomy was made 99.1% of the time. In measuring osteotomy placement, the average placement was made in the distal 1/3 of the ulna. Overall, there was a 40% complication rate. Hardware irritation requiring removal encompassed 23%, non-union 14%, and wound infection covered 0.8%. When comparing dorsal vs volar plating, there was no statistically significant difference for non-union or hardware removal. Similarly, in evaluating osteotomy level, there was no statistical difference between proximal vs distal osteotomy for non-union and hardware removal. In this multi-centered retrospective review of ulnar shortening osteotomies, we found that there was an overall complication rate of 40%. There was no statistically significant difference in complication rates between dorsal vs volar plate placement or proximal vs distal osteotomy sites. Further studies examining other potential risk factors in lowering the complication rate would be beneficial

Introduction. The classical Colles fracture (extraarticular, dorsally angulated distal radius fracture) in patients with osteoporotic bone is becoming increasingly more frequent. There still appears to be no clear consensus on the most appropriate surgical management of these injuries. The purpose of this study is to appraise the use of percutaneous extra-focal pinning, in the management of the classical colles fracture. Methods. We retrospectively analysed 72 consecutive cases of Colles fractures treated with interfragmentary K-wire fixation, in female patients over sixty years of age, in two orthopaedic centres, under the care of twelve different orthopaedic surgeons. We correlated the radiographic distal radius measurements (ulnar variance, volar tilt, and radial inclination) at the pre-operative and intra-operative stages with the final radiographic outcome. Result. Mean dorsal angulation was 21° at time of presentation. Closed reduction significantly improved fracture position to a mean of 2.7° volar angulation (p<0.05). Mean angulation at time of k-wire removal was 1.6° dorsal, this was not significant in comparison to post reduction measurements (p< 0.05). Mean ulnar variance at time of presentation was 2.5mm (range 7.4 to -4.2). Reduction improved fracture displacement to a mean of 0mm, which was statistically significant (p<0.05). Mean ulnar variance at time of k-wire removal was 2.4mm (p<0.05). 56.8% of cases demonstrated radial shortening of 2mm or more. Conclusion. In female patients over 60 years of age, the best predictor of radial length, when K-wire fixation is to be used, is the radial length prior to fracture reduction. Thus if there is radial shortening visible in the initial radiographs as measured in terms of ulnar variance, one should consider a method of fixation other than inter-fragmentary K-wires

Introduction. Acquired chronic radial head (RH) dislocations present a significant surgical challenge. Co-existing deformity, length discrepancy and RH dysplasia, in multiply operated patients often preclude acute correction. This study reports the clinical and radiological outcomes in children, treated with circular frames for gradual RH reduction. Materials and Methods. Patient cohort from a prospective database was reviewed to identity all circular frames for RH dislocations between 2000–2021. Patient demographics, clinical range and radiographic parameters were recorded. Results. From a cohort of 127 UL frames, 30 chronic RH dislocations (14 anterior, 16 posterior) were identified. Mean age at surgery was 10yrs (5–17). Six pathologies were reported (14 post-traumatic, 11 HME, 2 Nail-Patella, 1 Olliers, OI, Rickets). 70% had a congruent RH reduction at final follow-up. Three cases re-dislocated and 6 had some mild persistent incongruency. Average follow up duration was 4.1yrs (9mnths-11.5yrs). Mean radiographic correction achieved in coronal plane 9. o. , sagittal plane 7. o. and carrying angle 12. o. Mean ulna length gained was 7mm and final ulnar variance was 7mm negative (congenital). All cases achieved bony union with 2 requiring bone grafting. Mean frame duration was 166 days. Mean final range of motion was 64. o. supination, 54 . o. pronation, 2. o. to 138. o. flexion. 5 complications and 7 further operations were reported. Conclusions. The majority of children having frame correction achieve complete correction or minor subluxation, which is well tolerated clinically. Frame assisted reduction is an effective tool for selective complex cases irrespective of the pathology driving the RH dislocation

Introduction. The distal radius is the most frequently fractured bone in the forearm with an annual fracture incidence in the UK of about 9–37 in 10,000. Restoration of normal anatomy is an important factor that dictates the final functional outcome. A number of operative options are available, including Kirschner wiring, bridging or non-bridging external fixation and open reduction and internal fixation by means of dorsal, radial or volar plates. We designed this study to analyse the clinical and radiological outcome of distal radial fracture fixation using volar plating. Materials/Methods. Thirty-seven patients with distal radius fractures undergoing open reduction and internal fixation using volar plates were included. Tilt of the fractured distal radial fragment was recorded from the initial radiograph and classification of fractures was done using the Orthopaedic Trauma Association system. The QuickDASH questionnaire was used for evaluation of symptomatic and functional outcome six months to one year after surgery. The radiological outcome was assessed using measurements of radial inclination, ulnar variance and volar tilt. Of the thirty-seven patients, 13 were male and 24 were female. The mean age was 55.6 years (range 18–87 years). According to the AO classification, there were 8 cases each of C2 and C3 fractures, 6 cases of C1 fractures and 3 cases each of class A2, A3, B1 and B3 fractures. There were 2 patients with class B2 fracture. Results. Post-operatively, the average restoration of volar tilt was 6.47 degrees (range −12.4 to 20.3 degrees). Mean restoration of radial inclination was 23 degrees (range 12.5 to 30.0 degrees). Ulnar variance on average was 0.09 mm (range −5.0–6.7mm). The mean QuickDASH score was 9.8. Conclusion. The results of this study indicate that fixation of displaced intra- and extra-articular distal radial fractures is achieved satisfactorily with restoration of both normal anatomy and function using volar plates

Aims. To study the outcomes of DVR plating for distal radius fractures. Methods. We prospectively studied all patients managed with a DVR plate, over a twelve-month period in 2006/07. All patients were seen in our dedicated research clinic at 2, 6, 12 and 26 weeks post-operatively. Physiotherapy started at 2 weeks post-operatively. Active range of motion (ROM) of the injured wrist was recorded at 6, 12 and 26 weeks and compared with the normal side. Standardised radiographs were taken at 2 and 6 weeks and compared with pre- and post-operative films for radial and volar angulations, relative radial length, ulnar variance and implant position. Patient satisfaction was measured with the Patient Rated Wrist Evaluation score (PRWE) at 6, 12 and 26 weeks. Results. 129 patients (male:female 1:3) with a median age of 59 years (92-17 years) were seen. Mean measurements of pre-operative films were of 16 degrees dorsal angulation, 15 degrees radial inclination, 7 mm relative radial length and +2mm ulnar variance. In comparison post-operative results were -6 degrees, +22 degrees, 11mm and 0mm respectively, which remained unchanged at 2 and 6 weeks. The mean comparative active ROM was 70%, 88% and 98% at 6, 12 and 26 weeks respectively. The PRWE Score showed a mild degree of disability at 6 weeks and only minimal disability at 12 and 26 weeks. There were two cases of lost fracture position and no case of deep infection. Conclusion. Our study suggests that the DVR locking plate provides excellent fracture stability, allowing for early rehabilitation, with minimal complications. Radiological measurements were markedly improved and this correlated with a good ROM and high patient satisfaction. We recommend the use of the DVR plate to manage unstable distal radius fractures

Forearm deformity is common in Hereditary Multiple Exostoses, for which multiple surgical treatments exist. Acute ulnar lengthening has been described in the literature, though in small numbers and not independent of adjunctive procedures. We hypothesise that acute ulnar lengthening as a primary procedure is safe and effective in correcting forearm deformity. Seventeen ulnas in 13 patients had acute ulnar lengthening for HME associated forearm deformity, over an eight-year period. Radiographic parameters were assessed and compared preoperatively and postoperatively. Mean follow-up was 27 months. Complications and revisions were noted. The mean pre-operative ulnar variance, 12.4mm (range 6.1 – 16.5), was significantly reduced post-operatively to a mean 4.6mm (p=<0.00001). A significant acute difference was achieved in carpal slip, (mean change of −2.2mm, p=0.02) but no significant change was seen with regard to radial bowing (p=0.98) or radial articular angle (p=0.74). There were three episodes of recurrence requiring revision. There were no major complications. Significant radiographic improvements in forearm and wrist alignment were seen with acute ulnar lengthening. Complications were infrequent. Recurrence rates in the skeletally immature patients are comparable to that reported with gradual lengthening techniques. Acute ulnar lengthening for forearm deformity associated with HME, has been demonstrated to be a safe, reproducible and effective surgical procedure

Displaced distal radial fractures in adults are commonplace. Acknowledging that satisfactory radiographic parameters typically will beget satisfactory functional outcomes, management of these fractures includes a reduction followed by either cast/splint immobilisation or internal fixation. While we can generally rely on internal fixation to maintain the reduction the same is not true of cast immobilisation. There are, however, limited data defining the fate of a fracture reduction in those treated in a cast and up to the time of radial union. Traditional practice is to recommend six weeks of immobilisation. Our goal was to detail the radiographic patterns of change in the radiographic parameters of radial inclination (RI), ulnar variance (UV) and radial tilt (RT) over the first twelve weeks in women fifty years old and older who had sustained a displaced distal radial fracture. We examined serial standard PA and lateral distal radius radiographs of 647 women treated by closed reduction and casting for a displaced fracture of the distal radius. Measurements of RI, UV and RT from standardised radiographs were made immediately post-reduction as well as, as often as possible/feasible, at 1,2,3,6,9 and 12 weeks post fracture. All measurements were made by the senior author (accuracy range: 2 degrees for RI, 1 mm for UV and 4 degrees for RT, in 75% of cases). The primary outcome measure was the change in fracture position over time. Secondary outcomes included changes related to age group; known bone density; the relation to associated ulnar fractures; and independence of the variables of RI, UV and RT. The mean immediate post-reduction values for RI, UV and RT were 21 degrees, 1.5 mm, and −6 degrees, respectively. These all changed in the first six weeks, and did not in the second six week period. The mean change in RI was 3 degrees, 60% of the change occurring in the first week post-reduction; only 0.3 degrees of change was noted beyond three weeks. The mean UV increased by 2.2 mm over the first 6 weeks, 23% in the first week post reduction. The mean RT change of 7.7 degrees was also gradual over the first 6 weeks, with no significant change afterwards. The RI changes identified were not influenced by patient age, while UV and RT changes were greater in older groups. Those fractures of the distal radius associated with a distal ulnar shaft or neck fracture did not lose radial inclination over the study period. We have defined patterns of loss of reduction that commonly occur post reduction of a displaced distal radius fracture in women fifty years and older. Such patterns ought to guide our closed management of distal radial fractures, whether by altering the duration or method of casting. Women fifty years old and older, and physicians alike, must be advised that conventional casting post distal radial fracture reduction unreliably maintains fracture reduction

Introduction. Ulnar shortening osteotomy has become an accepted treatment for a variety of ulnar sided wrist disorders. We have been performing ulnar shortening with an oblique osteotomy cut with the aid of a commercially available jig. The osteotomy is then fixed with a Dynamic Compression Plate. The aim of this study was to report the complications following ulnar shortening. Methods. We retrospectively analysed 56 consecutive ulnar shortening osteotomies. There were 36 female and 19 male patients. The mean age was 45 years. The mean follow-up was 399 days. 25 patients had pre-operative MRI scans and in 34 arthroscopy of the wrist had been performed. 22 tears of the triangular fibrocartilage complex were recorded on arthroscopy. In all cases shortening had been performed with the aid of a jig and bone resection performed in an oblique orientation. Dynamic Compression Plates were used for fixation and a lag screw was inserted through one of the plate-holes and across the osteotomy site. Radiographs were evaluated for pre-operative and post-operative ulnar variances and post-operatively for bony union. Results. The average post-operative ulna variance was 0.12mm. The average time for osteotomy union was 82 days. There were four delayed unions. There were three non-unions. The average time of revision surgery was ten months. All cases have gone onto radiographic union. 19 patients underwent a second operation to have their plates removed. Average time to plate removal was 494 days. There were two cases of re-fracture following plate removal. Conclusion. The rate of delayed and non-union following ulnar shortening osteotomy is higher in our series when compared to the literature. We also noted a higher incidence of plate removal and re-fracture through the osteotomy site. These complications are under-reported in the literature and more emphasis should be given when consent is taken for this procedure

A fracture of the distal radius may lead to malunion of bone segments, which gives discomfort to the patient and may lead to chronic pain, reduced range of motion, reduced grip strength and finally to early osteoarthritis. A treatment option to realign the bone segments is a corrective osteotomy. In this procedure the surgeon tries to improve alignment by cutting the bone at, or near, the fracture location and by fixating the bone segments in an improved position, using a plate and screws. Standard corrective osteotomy of the distal radius is most often planned using two orthogonal radiographs to find correction parameters for restoring the radial inclination, palmar tilt and ulnar variance, to normal. However, 2D imaging techniques hide rotations about the bone axis and may therefore cause a misinterpretation of the correction parameters. We present a new technique that uses preoperative 3-D imaging techniques to plan positioning and to design a patient-tailored fixation plate that only fits in one way and realigns the bone segments as planned in six degrees of freedom. The procedure uses a surgical guide that snugly fits the bone geometry and allows predrilling the bone at specified positions, and cutting the bone through a slit at the preoperatively planned location. The patient-tailored plate fits the same bone geometry and uses the predrilled holes for screw fixation. The method is evaluated experimentally using artificial bones and renders realignment highly accurate and very reproducible (derr < 1.2 ± 0.8 mm and ϕerr < 1.8 ± 2.1°). In addition, the new method is evaluated clinically (n=1) and results in accurate positioning (derr ≤ 1.0 mm and ϕerr ≤ 2.6°). Besides using a patient-tailored plate for corrective distal radius osteotomy, the method may be of interest for corrective osteotomy of other long bones, mandibular reconstruction and clavicular reconstruction as well. In all of these cases the contralateral side can equally be used as reference for reconstruction of the affected side. The two-step method of predrilling and cutting using a surgical guide, followed by the utilisation of a patient-tailored plate for fixation and accurate 3D positioning at the same time, seems very easy to utilise during surgery, since it does not require complex navigation, robotic equipment or tracking tools. Custom treatment with a patient-tailored plate may reduce the reoperation rate, since repositioning is likely to be better than conventional malunion treatment using 2D imaging techniques and a standard anatomical plate. The patient-tailored plating technology is expected to have a great impact on future corrective osteotomy surgery

Distal radial volar locking plating systems (DRVLP) are increasingly used for complex fractures of the distal radius. There have been limited studies on volar locking plating systems focusing on functional outcome and complications data. The aim of this study is to assess whether the surgeon can predict which fractures will have a good or poor outcome in terms of clinical, radiological and functional outcome assessment. Patients who sustained a distal radial fracture managed with a radial volar locking plate were identified from hospital audit data systems. Data was collected on all patients from patient notes including radiographs performed pre- and post-operatively and functional scores using the Patient Rated Wrist Evaluation score (PRWE). The study was approved by the Barwon Health Research and Ethics Advisory Committee. In total, there were 153 patients (105 female, 48 male) from all 11 surgeons in the unit. Patients ranged in age from 17 to 91 years, average age of 53.7 years at time of injury (IQR 41-70yr). A quarter had concomitant other injuries, and 60% had type C1-C3 fractures. Most of the patients (n = 147) had the AO Synthes DRVLP, six patients had other volar locking plate systems. Twenty-seven percent of patients (n = 42) had exogenous bone graft insertion for more unstable fracture patterns. The major complication rate was 12% (18/153) with 17 cases requiring further surgery. Post-operative radiographs demonstrated no increase in ulnar variance (median 0.0mm IQR 2.0 to1.0 mm) but an increase in radial inclination by 5 deg (IQR 0-12 deg), radial length by 3.5 mm (IQR 1.0-6.3 mm) and radial tilt by 17 deg (IQR 3-32 deg) (volar angulation) compared to pre-operative radiographs, which was statistically significant (all p<0.001). Ninety percent of patients returned a PRWE form with an average follow-up of 1.16 years (IQR 0.46-2.16yr). Median score for those aged less than 50 years was 14.00 (IQR 6.00-41.50) and did not differ from those greater than 50 years (median 16.00 IQR 4.50-36.00) (p = 1.00). PRWE score across groups categorised by classification of fracture showed large variance within each category and were not significantly different: Class A median 8.00 (IQR 3.50-26.25), Class B 13.00 (IQR 6.75-34.00) and Class C 17 (IQR 5.00-38.50) (p = 0.65). The majority of patients were female and had a type C fracture. Post-operative x-rays displayed an increase in radial inclination, length and tilt, and restoration of radial antatomy. PRWE scores were not different across age groups or classification of the fracture. This demonstrates that predictable outcomes can be achieved with volar locking plates despite fracture complexity if attention is paid to anatomical restoration of the radius, and in more unstable patterns with void support using injectable graft. Quadratus can act as an effective barrier to prominent hardware and superficial infection. Supination range may be reduced by this approach due to a tight repair, though a palmar DRUJ capsule contracture may also be an explanation