Classification systems for tibial plateau fractures suffer from poor interobserver agreement, and their value in preoperative assessment to guide surgical fixation strategies is limited. For tibial plateau fractures four major characteristics are identified: lateral split fragment, posteromedial fragment, anterior tubercle fragment, and central zone of comminution. These fracture characteristics support preoperative assessment of fractures and guide surgical decision-making as each specific component requires a respective fixation strategy. We aimed to evaluate the additional value of 3D-printed models for the identification of tibial plateau fracture characteristics in terms of the interobserver agreement on different fracture characteristics. Preoperative images of 40 patients were randomly selected. Nine trauma surgeons, eight senior and eight junior registrars indicated the presence or absence of four fracture characteristics with and without 3D-printed models. The Fleiss kappa was used to determine interobserver agreement for fracture classification and for interpretation, the Landis and Koch criteria were used. 3D-printed models lead to a categorical improvement in interobserver agreement for three of four fracture characteristics: lateral split (Kconv = 0.445 versus K3Dprint = 0.620; P < 0.001), anterior tubercle fragment (Kconv = 0.288 versus K3Dprint = 0.449; P < 0.001) and zone of comminution (Kconv = 0.535 versus K3Dprint = 0.652; P < 0.001). The overall interobserver agreement improved for three of four fracture characteristics after the addition of 3D printed models. For two fracture characteristics, lateral split and zone of comminution, a substantial interobserver agreement was achieved. Fracture characteristics seem to be a more reliable way to assess tibial plateau fractures and one should consider including these in the preoperative assessment of tibial plateau fractures compared to the commonly used classification systems

The purpose of this project was to evaluate North American trauma surgeon preferences regarding patient positioning for antegrade fixation of mid shaft femoral shaft fractures. This project was a cross sectional survey taken of orthopaedic fellows and staff surgeons, belonging to three organizations across North America. An estimated sample size was calculated a priori, while various online techniques were utilized to reduce non responder and fatigue bias. The survey was distributed multiple times to optimize yield. Two hundred twelve (212) participants responded in full, 134 (56%) of whom practiced in Canada. The majority of surgeons worked in level one trauma centres (74%), while 72% treated more than one femoral shaft fracture per week. The most common patient position for mid shaft fixation amongst all surgeons was lateral positioning with manual traction (68%), however community surgeons were significantly more likely to use a fracture table. The most common difficulties faced with using a fracture table were inability to achieve fracture reduction and peroneal nerve palsies. The majority (64%) of surgeons quoted a complication rate with fracture tables of greater than 1 per 100 cases. Lateral position with use of manual traction is the preferred set up for antegrade fixation of femoral shaft fracture in this large North American cohort of trauma surgeons. However, a large subset of community and non academic surgeons still prefer use of the fracture table. Amongst all respondents, a high rate of fracture table complications, including malreduction, were quoted. To date, there is no prospective data comparing these two options for patient positioning, and a randomized controlled trial may be an appropriate next step

Aim. Infection rates after management of open fractures are still high. Existing guidelines regarding prevention of this complication are inhomogeneous. A survey directed to orthopaedic trauma surgeons worldwide aims to give an overview of current practices in the management of open fractures. Method. An international group of trauma surgeons and infection specialists with experience in the field of musculoskeletal infections developed a questionnaire that was distributed via email to all AOTrauma members worldwide. Descriptive statistical analysis was performed. Results. 1197 orthopaedic trauma surgeons answered the survey (response rate: 4,9% of all opened emails). Cephalosporins are the most commonly used antibiotics for systemic prophylaxis in open fractures (cefazolin: 51,46% cefuroxime: 23,6%, ceftriaxone: 14,54%). In Gustilo type III open fractures gentamicin (49,12%) and metronidazole (33,58%) are often added. 86% (n=1033) reported to give the first dosage of systemic antibiotics in the emergency department as soon as the patient arrives. Only 3% (n=34) reported pre-hospital administration at the scene of the accident or during transport to the hospital. While most respondents administer antibiotics over 24h in type I open fractures (34%, n=405), for type II open fractures the most often mentioned duration is 72h (26%, n=306). For type III a 7 days course was most often performed (38%, n=448). Overall, there is a tendency to longer durations with increasing severity. However, a vast majority agreed that the optimal duration is not well defined in the literature (71%, n=849). 20psi,”Jet-Lavage”). The amount of irrigation fluid has a bimodal distribution with two peaks at 4–6 liters (24%, n=286) and at 8–10 liters (24%, n=282). Conclusions. Results from our survey give an overview of current practices and identify certain aspects in the management of open fractures where treatment protocols are very heterogenous and guidelines not well accepted. These controversies demand for further research in this field to provide better evidence

Introduction. Current undergraduate trauma and life-support training inadequately equips medical students with the knowledge, practical skills and confidence to manage trauma patients. Often first to the scene of medical emergencies, it is imperative junior doctors feel confident and competent from day one. No UK university currently includes advanced trauma and life support (ATLS) in their curriculum. This study piloted an ATLS course for Cardiff final-year medical students to improve confidence and knowledge in management of the trauma patient. Aim. To assess the immediate effect of a one-day undergraduate ATLS course on medical student's confidence in management of the trauma patients. Methods. Twelve final-year students attended a one-day, practical-skills based and interactive course led by trauma surgeons. Students' confidence managing a trauma patient were assessed pre and post-course using a six-item-MCQ with a 5-point Likert scale. Paired t-tests were carried out on SPSS for comparison pre and post-course across the six items. Qualitative feedback was also collected. Results. The students' confidence in managing a trauma patient's ‘airway and breathing’, ‘circulation’ and ‘C-spine’ all significantly improved after attending the course (p=0.023, p=0.045 and p=000 respectively). Students felt significantly more confident completing practical skills related to trauma (p= 0.001) and their confidence in managing trauma patients overall at the level expected of a Foundation doctor increased significantly (p= 0.003). Qualitative feedback demonstrated high faculty-to-student ratio, practical and interactive teaching methods were particularly helpful. Conclusion. The content and delivery of this course proved beneficial for final-year medical students imminently becoming Foundation doctors, evidencing the requirement for increased trauma training. We advocate the expansion and continuation of this novel student course to continue improving the trauma training within the undergraduate curriculum

Abstract. Introduction. Minimising postoperative complications and mortality in COVID-19 patients who were undergoing trauma and orthopaedic surgeries is an international priority. Aim was to develop a predictive nomogram for 30-day morbidity/mortality of COVID-19 infection in patients who underwent orthopaedic and trauma surgery during the coronavirus pandemic in the UK in 2020 compared to a similar period in 2019. Secondary objective was to compare between patients with positive PCR test and those with negative test. Methods. Retrospective multi-center study including 50 hospitals. Patients with suspicion of SARS-CoV-2 infection who had underwent orthopaedic or trauma surgery for any indication during the 2020 pandemic were enrolled in the study (2525 patients). We analysed cases performed on orthopaedic and trauma operative lists in 2019 for comparison (4417). Multivariable Logistic Regression analysis was performed to assess the possible predictors of a fatal outcome. A nomogram was developed with the possible predictors and total point were calculated. Results. Of the 2525 patients admitted for suspicion of COVID-19, 658 patients had negative preoperative test, 151 with positive test and 1716 with unknown preoperative COVID-19 status. Preoperative COVID-19 status, sex, ASA grade, urgency and indication of surgery, use of torniquet, grade of operating surgeon and some comorbidities were independent risk factors associated with 30-day complications/mortality. The 2020 nomogram model exhibited moderate prediction ability. In contrast, the prediction ability of total points of 2019 nomogram model was excellent. Conclusions. Nomograms can be used by orthopaedic and trauma surgeons as a practical and effective tool in postoperative complications and mortality risk estimation

Tibial plateau fractures classically present in a bimodal distribution associated with high energy mechanisms in the younger population and fragility fractures in the elderly populations as a result they are well suited for looking at the effect major trauma centre status. Military trauma surgeons in training should be exposed to as much young high-energy trauma as possible to equip them for operations. Retrospective review of all tibial plateaus presenting to RVI 20 months before MTC status and 20 months following this. 61 patients pre, 66 post. Schatzker grade 1–4 were similar pre and post change. Post change there was an increase in Schatzker 5 (62%) and 6 (27%). High energy injuries were most common in younger males, cause was falls followed by RTAs. MTC status has meant an increase in high energy tibial plateaus (Schatzker 5–6) These were predominantly seen in younger males with high-energy mechanisms. As this is likely to be replicated across all injuries, we would recommend military trauma surgeons have a significant period of time training in major trauma centres to ensure adequate exposure to young high energy trauma

Three dimensional printing is an emerging new technology in medicine and the current educational value of 3D printed fracture models is unknown. The delayed surgery and need for CT imaging make calcaneal fractures an ideal scenario for preoperative 3D printed (3Dp) fracture models. The goal of this study is to assess if improvements in fracture understanding and surgical planning can be realized by trainees when they are given standard CT imaging and a 3Dp model compared to standard CT imaging and a virtual 3D rendering (3D CT). Ethics approval was granted for a selection of calcaneal fracture imaging studies to be collected through a practice audit of a senior orthopaedic trauma surgeon. 3Dp models were created in house. Digital Imaging and Communications in Medicine (DICOM) files of patient CT scans were obtained from local servers in an anonymized fashion. DICOM files were then converted to .STL models using the Mimics inPrint 2.0 (Materialise NV, Leuven, Belgium) software. Models were converted into a .gcode file through a slicer program (Simplify3D, Blue Ash, OH USA). The .gcode files were printed on a TEVO Little Monster Delta FDM printer (TEVO USA, CO USA) using 1.75mm polylactic acid (PLA) filament. Study participants rotated through 10 workstations viewing CT images and either a digital 3D volume rendering or 3Dp model of the fractured calcaneus. A questionnaire at each workstation assessed fracture classification, proposed method of treatment, confidence with fracture understanding and satisfaction with the accuracy of the 3Dp model or 3D volume rendering. Participants included current orthopaedic surgery trainees and staff surgeons. A total of 16 residents and five staff completed the study. Ten fracture cases were included in the analysis for time, confidence of fracture understanding, perceived model accuracy and treatment method. Eight fracture cases were included for assessment of diagnosis. There were no cases that obtained universal agreement on either Sanders classification or treatment method from staff participants. Residents in their final year of studies had the quickest mean time of assessment (60 +/− 24 sec.) and highest percentage of correct diagnoses (83%) although these did not reach significance compared to the other residency years. There was a significant increase in confidence of fracture understanding with increasing residency year. Also, confidence was improved in cases where a 3Dp model was available compared to conventional CT alone although this improvement diminished with increasing residency year. Perceived accuracy of the cases with 3Dp models was significantly higher than cases without models (7 vs 5.5 p < 0.0001). This is the first study to our knowledge to assess trainee confidence as a primary outcome in the assessment of the educational value of 3Dp models. This study was able to show that a 3Dp model aides in the perceived accuracy of fracture assessment and showed an improvement in trainee confidence, although the effect on confidence seems to diminish with increasing residency year. We propose that 3D printed calcaneal fracture models are a beneficial educational tool for junior level trainees and the role of 3Dp models for other complex orthopaedic presentations should be explored

Management of 4-part fractures of the proximal humerus continues to challenge orthopaedic surgeons, shoulder surgeons, and trauma surgeons. Truly displaced 4-part fractures typically require surgery if the patient is medically able to undergo a surgical procedure. However, outcomes following surgery are not always as predictable as we would like. Results following hemiarthroplasty have led to more predictable pain relief than predictable functional recovery relying exclusively on the fate of tuberosity healing. Tuberosity healing failure leads to nearly universal catastrophic results with pain, dysfunction, and pseudoparalysis. Furthermore, conversion of failed hemiarthroplasty to reverse total shoulder arthroplasty leads to the highest incidence of complications and poorest outcomes of all groups of patients undergoing reverse total shoulder replacement. This is countered by the knowledge that if tuberosity healing occurs the outcome can be reliable with regard to pain relief and functional restoration. Reverse total shoulder arthroplasty, on the other hand, has emerged as a preferred surgical option for many surgeons due to the issues following hemiarthroplasty. The increased prevalence of RTSA for the management of 4-part fractures has come without overwhelming evidence that outcomes are superior especially in light of the increased cost, life-time weight bearing restrictions, and uncertain long-term durability. Long-term follow-up of patients treated with RTSA for 4-part fracture has shown concerning degradation of function and outcomes and remains a valid concern about the long-term durability. We must remain diligent therefore in continuing to better understand which fractures should be treated non-operatively and those that may be amenable to anatomic hemiarthroplasty and finally those which may be better served by using a reverse total shoulder replacement

In revision surgery of a neglected loose cemented stem, especially if long-standing infection is present, the bone may become extremely thin and fragile. A fracture during implant removal, therefore, occurs readily and the bone may simply disintegrate so that it cannot be reconstructed to produce intrinsic stability. In such cases, rather than try to put together a house of cards, the bail and nail technique may be used. I first described this in 1992. A large bore intramedullary nail is inserted into what is left of the femur and the bone fragments proximally or cerclage wires are around the nail. The patient is left with a Girdlestone. Most patients cannot weight-bear on a Girdlestone for about two months. After that time, they are encouraged to do so as load bearing speeds healing and bone regeneration. Generally, within six to nine months, the femur is reconstituted and a revision can be carried out. This is a simple operation as the medullary canal is already open and the regenerated bone is often of surprising good quality. It may even be possible to use a primary stem as opposed to a long revision stem, but this probably should not be done under nine months. The presence of an IM nail and cerclage wires does not prevent the elimination of infection. As our brothers, the trauma surgeons, will attest the treatment of an infected non-union of the femur is an intramedullary nail. This technique is seldom required. The author has used it in eight cases in the last 30 years. It is, however, extremely valuable in bailing out of an impossible revision, especially if strut allografts or modular long stems are not immediately available

Aims

The use of fluoroscopy in orthopaedic surgery creates risk of radiation exposure to surgeons. Appropriate personal protective equipment (PPE) can help mitigate this. The primary aim of this study was to assess if current radiation protection in orthopaedic trauma is safe. The secondary aims were to describe normative data of radiation exposure during common orthopaedic procedures, evaluate ways to improve any deficits in protection, and validate the use of electronic personal dosimeters (EPDs) in assessing radiation dose in orthopaedic surgery.

Periprosthetic fractures after total hip arthroplasty lead to considerable morbidity in terms of loss of component fixation, bone loss and subsequent functional compromise. The prevention, early recognition and appropriate management of such fractures are therefore critical. The pathogenesis of periprosthetic factors is multi-factorial. There are a number of intrinsic patient influences such as poor bone stock, biomechanics and compliance. There are also a host of extrinsic factors over which the surgeon has more control. The key tenets for fracture avoidance include careful planning, identifying the risk, choosing the correct implant, understanding the anatomy, and using appropriate surgical technique. There are a number of recognised risk factors for periprosthetic hip fractures The prevalence of intraoperative fractures during total hip arthroplasty is higher in the patient with osteopenia / osteoporosis. Other conditions causing increased bone fragility, such as osteomalacia, Paget's disease, osteopetrosis, and osteogenesis imperfecta are also at a higher risk of intraoperative fracture. The use of more and more press fit cementless components has also increased the number of periprosthetic femoral fractures because of the force required to obtain such a fit. Complex deformities of the proximal femur, particularly when associated with a narrow medullary canal, may also increase the risk of intraoperative fractures. Revision surgery is associated with a higher risk of intraoperative fracture than primary hip replacement surgery. These fractures typically occur during hip dislocation, cement extraction, or reaming through old cement. Other risk factors for postoperative femoral fractures following total hip replacement include loosening of the prosthesis with cortical bone loss, local osteolysis, stress risers within the cortex, such as old screw holes, the ends of plates, or impingement of a loose stem against the lateral femoral cortex. The management of periprosthetic fractures requires appropriate preoperative imaging, planning and templating, the availability of the necessary expertise and equipment, and knowledge of the potential pitfalls so that these can be avoided both intraoperatively and in follow-up. There is a danger that these cases fall between the expertise of the trauma surgeon and that of the revision arthroplasty surgeon. The past two decades have afforded us clear treatment algorithms based on fracture location, component fixation and the available bone stock. We still nevertheless face the enduring challenge of an elderly population with a high level of comorbidity who struggle to rehabilitate after such injuries. Perioperative optimization is critical as we have seen prolonged hospital stays, high rates of systemic complications and a significant short term mortality in this cohort. We have also been presented with new difficult fracture patterns around anatomic cementless stems and in relation to tapered cemented and cementless stems, as well as biologically challenging transverse or oblique fractures at the tip of a stem. In many cases, fixation techniques are biomechanically and biologically doomed to fail and intramedullary stability, achieved through complex revision is required. The sequelae of periprosthetic fractures include the financial cost of fixation or revision surgery, the associated morbidity and mortality in an elderly frail population, the difficulty with mobilization if the patient cannot fully weight bear, and a poor functional outcome in a proportion of cases. The battle over which patients or fractures require fixation and which require revision surgery continues

Open reduction and internal fixation of acetabular fractures demands detailed preoperative planning, and given their frequent complexity, a thorough understanding of their three-dimensional (3D) form is necessary. This study aims to assess if the use of dynamic 3D models will improve preoperative planning of acetabular fractures. In this study, three experienced pelvic trauma surgeons were provided with computer based dynamic 3D models in addition to preoperative radiographs, CT scans and static 3D reconstructions of 17 acetabular fractures operatively managed at the Royal Melbourne Hospital. Surgeons, blinded to any previous operative plan or patient detail, then classified fracture type and made preoperative surgical plans. Comparison was then made to classification and operative approach documented in the patient's operation notes. Comparison was then made with regard to surgical plan and planning time with or without access to dynamic 3D models. In complex cases the additional information provided by dynamic 3D modelling was found to reduce planning time and, in some cases, change the surgical plan. For complex acetabular fractures we recommend that surgeons should have access to computer-based dynamic 3D models of the injuries for pre-operative planning

Purpose. Antibiotic prophylaxis plays an important role in minimizing surgical site infections as well as other nosocomial peri-operative infections in orthopaedic trauma patients. Pre-operative prophylaxis has been shown to be efficacious, but the role and duration of post-operative prophylaxis remains controversial. The goal of this study was to assess whether patients receive their antibiotic prophylaxis as prescribed. What dose and duration of antibiotics are typically ordered, what patients actually receive, and factors causing the ordered antibiotic regime to be altered were also investigated. This study did not investigate infection rates or the efficacy of various antibiotic prophylactic regimes. Method. This study presents data collected through a retrospective chart review of 205 patients treated surgically for a closed fracture at one institution. A national survey was also distributed to all surgeon members of the Canadian Orthopaedic Trauma Society (COTS) concerning antibiotic prophylaxis in the setting of surgical treatment for closed fractures. Results. Ninety three percent (179/193) of patients received an appropriate pre-operative dose, while less than 32% (58/181) of patients received their post-operative antibiotics as ordered. The most common stated reason for patients not receiving their post-operative antibiotics as ordered was patients being discharged before completing three post-op doses. There was a 70% (39/56) response rate to the survey sent to COTS surgeons. A single dose of a first-generation cephalosporin pre-operatively followed by three doses post-operatively is the most common practice amongst orthopaedic trauma surgeons across Canada, but several surgeons use only pre-operative prophylaxis. Conclusion. Adherence to multi-dose post-operative antibiotic regimens is poor. Meta-analyses have failed to demonstrate the superiority of multi-dose regimens over single-dose prophylaxis. Single-dose pre-operative antibiotic prophylaxis may be a reasonable choice for most orthopedic trauma patients with closed fractures

Background. The optimal treatment for pilon fractures remains controversial. We have used early single-stage open reduction and internal fixation to treat these injuries and the purpose of this study was to determine the safety and efficacy of this strategy. Methods. A cohort of 95 patients with AO type C tibial pilon fractures underwent primary ORIF. Of these patients, 21 had open fractures. Sixty-eight fractures were sustained in falls, 21 in motor vehicle collision, 5 in crushes and one in an aircraft crash. The principal outcome measure was wound dehiscence or infection requiring surgery. Radiological and functional outcomes were assessed at a mean of five years using the SF36 and the Foot and Ankle Outcome Score. Results. Primary ORIF was performed within 48 hours of admission in 98% cases. Reduction was anatomical in 90% cases. Six (6%) patients developed a wound infection or dehiscence that required surgical débridement, giving a wound complication rate of 4/21 (19%) for open fractures and 2/74 (2.7%) for closed fractures. Of the two closed fractures, one occurred in a patient with local scarring from previous trauma, insulin-dependent diabetes mellitus and chronic alcohol abuse, and the other in a patient with schizophrenia, diabetes and peripheral neuropathy. Radiographic follow-up revealed 74% patients had normal appearances or mild osteoarthritic degeneration only. Functional outcomes revealed a reduced level of general health and mild disability. Conclusions. Provided surgery is performed expeditiously by experienced orthopaedic trauma surgeons, AO type C pilon fractures can be stabilised safely and effectively by primary ORIF, with very low rates of wound complications, a high quality of reduction, and a good long term outcome. These results compare favourably with the published results for all other methods of treatment

Periprosthetic fractures in total hip arthroplasty lead to considerable morbidity in terms of loss of component fixation, loss of bone and subsequent functional deficits. We face an epidemic of periprosthetic fractures as the number of cementless implants inserted continues to rise and as the number of revisions continues to increase. The management of periprosthetic fractures requires careful preoperative imaging, planning and templating, the availability of the necessary expertise and equipment, and knowledge of the potential pitfalls so that these can be avoided both intra-operatively and in follow-up. There is a danger that these cases fall between the expertise of the trauma surgeon and that of the revision arthroplasty surgeon. The past decade has afforded us clear treatment algorithms based on fracture location, component fixation and the available bone stock. We still nevertheless face the enduring challenge of an elderly population with a high level of comorbidity who struggle to rehabilitate after such injuries. Perioperative optimisation is critical as we have seen prolonged hospital stays, high rates of systemic complications and a significant short term mortality in this cohort. We have also been presented with new difficult fracture patterns around anatomic cementless stems and in relation to tapered cemented and cementless stems. In many cases, fixation techniques are biomechanically and biologically doomed to fail and intramedullary stability, achieved through complex revision is required. The treatment of unstable peri-prosthetic femur fractures can be technically challenging due to the weak non-supportive bone stock. We have seen an increase in the frequency of Type B3 fractures that require complex reconstruction with modular tapers, interlocking implants and proximal femoral replacements. Our reconstructive practice has evolved; the aims of femoral reconstruction include rotational and axial stability of the stem, near normal hip biomechanics and preserving as much femoral bone as possible. The advent of modular prostheses that gain distal fixation but have proximal options has extended the scope of this type of fixation. We now favor modular tapered stems that afford us the opportunity to reconstruct such femora whilst attempting to preserve the proximal bone. In effect, distal cone or taper fixation provides the initial stability required for the procedure to be successful but the proximal modular implant subsequently load shares to decrease stress shielding, distribute stress more evenly through the femur and minimise the risk of stem fracture. Such systems provide the intraoperative versatility that these cases require. The use of interlocking stems with coated ingrowth surfaces offers a relatively appealing solution for some complex fractures and avoids the complications that would be associated with unstable fixation or resection of the proximal femur. Periprosthetic acetabular fractures are also increasingly recognised. This is in part due to the popularity of press fit components, which increase fracture risk both at the time of insertion and later due to medial wall stress shielding and pelvic osteolysis, and partly due to the increasing frequency of severe defects encountered at the time of revision surgery. These can present a very difficult reconstructive challenge and may require porous metal, cup-cage or custom reconstruction. Periprosthetic fractures continue to cause problems worldwide. The sequelae of periprosthetic fractures include the financial cost of fixation or revision surgery, the associated morbidity and mortality in an elderly frail population, the difficulty with mobilisation if the patient cannot fully weight bear and a poor functional outcome in a proportion of cases. The battle over which patients or fractures require fixation and which require revision surgery continues

Introduction. Acetabular fractures are a challenging problem. It has been published that outcome is dependent upon the type of fracture, the reduction of the fracture and concomitant injuries. The end-points of poor outcome include avascular necrosis of the femoral head, osteoarthritis. However, we lack definitive statistics and so counselling patients on prognosis could be improved. In order to achieve this, more outcome studies from tertiary referral centres are required. We present the first long term follow up from a large tertiary referral Centre in Ireland. Methods. We identified all patients who were ten years following open reduction and internal fixation of an acetbular fracture in our centre. We invited all of these patients to attend the hospital for clinical and radiographic follow-up. As part of this, three scoring systems were completed for each patient; the Short-form 36 health survey (SF36), the Merle d'Aubigné score and the Short Musculoskeletal Functional Assessment (SMFA). Results. The data represents one years activity at a new tertiary referral unit. We idenfied a total of 44 patients who were ten years following ORIF of acetabular fractures in our unit. 21 patients (48%) replied to written invitation and attended the hospital for clinical and radiographic follow-up. A further 7 patients were contacted by telephone and interviewed to guage their rehabilitation. 3 patients had passed away. The remaining 13 patients were not contactable. Of those who attended in person for follow-up; 18 were male and 3 were female. The mean age at follow-up was 40.5 years (Range 27-60). In terms of fracture pattern epidemiology, 43% of patients sustained posterior column and wall fractures, 29% posterior wall, 14% posterior column alone, 9.5% transverse with posterior wall and 9.5% bicolumnar. 2 patients in the follow-up group had total hip replacements. Of the remaining patients the overall mean SF36 score was 78.8% (SD 16.4). The mean SMFA was 14.1% (SD 5). The mean Merle d'Aubigné score was 14.9 (SD 3.2) with 63% graded as good or excellent. Comparison of outcome between sub-groups according to fracture clasification showed no significant difference. Traumatic sciatic nerve injury was sustained by four patients in the follow-up group and all patients continued to complain of ongoing weakness. Of the patients who were contacted via telephone, 2 had total hip replacements. The remaining 5 reported no significant problems with their hips and cited this as the reason for not attending follow-up. Conclusion. Overall the outcome of the patients was more favourable than expected. This was supported by the results of the clinical scoring systems. In some patients this also appeared to be despite poor radiographic findings. Our observations suggest that concomitant injuries, especially sciatic nerve injury have a profound negative influence on the patients' ability to fully rehabilitate. These data provide a valuable tool for the trauma surgeon in providing the patient with an educated prognosis

This study was undertaken to evaluate the safety and efficacy of retrievable inferior vena cava filters in high-risk orthopaedic patients. A total of 58 patients had a retrievable inferior vena cava filter placed as an adjunct to chemical and mechanical prophylaxis, most commonly for a history of previous deep-vein thrombosis or pulmonary embolism, polytrauma, or expected prolonged immobilisation. In total 56 patients (96.6%) had an uncomplicated post-operative course. Two patients (3.4%) died in the peri-operative period for unrelated reasons.

Of the 56 surviving patients, 50 (89%) were available for follow-up. A total of 32 filters (64%) were removed without complication at a mean of 37.8 days (4 to 238) after placement. There were four filters (8%) which were retained because of thrombosis at the filter site, and four (8%) were retained because of incorporation of the filter into the wall of the inferior vena cava. In ten cases (20%) the retrievable filter was left in place to continue as primary prophylaxis. No patient had post-removal thromboembolic complications.

A retrievable inferior vena cava filter, as an adjunct to chemical and mechanical prophylaxis, was a safe and effective means of reducing the acute risk of pulmonary embolism in this high-risk group of patients. Although most filters were removed without complications, thereby avoiding the long-term complications that have plagued permanent indwelling filters, a relatively high percentage of filters had to be left in situ.