Both the patient and the surgeon want hip and knee arthroplasties to last a lifetime. As a result, many patients have been told to defer arthroplasty as long as possible. After arthroplasty, many patients have been advised to limit physical activity. Such management strategies prioritise longevity but compromise lifestyle. Given that the technical aspects of the arthroplasty are satisfactory, modern total hip and knee prostheses have demonstrated remarkable durability. Quantitative studies of
Both the patient and the surgeon want hip and knee arthroplasties to last a lifetime. As a result, many patients have been told to defer arthroplasty as long as possible. After arthroplasty, many patients have been advised to limit physical activity. Such management strategies prioritise longevity but compromise lifestyle. Given that the technical aspects of the arthroplasty are satisfactory, modern total hip and knee prostheses have demonstrated remarkable durability. Quantitative studies of
Increasing pressure to use rapid recovery care pathways when treating patients undergoing total hip arthroplasty (THA) is evident in current health care systems for numerous reasons. Patient autonomy and health care economics has challenged the ability of THA implants to maintain functional integrity before achieving bony union. Although collared stems have been shown to provide improved axial stability, it is unclear if this stability correlates with activity levels or results in improved early function to patients compared to collarless stems. This study aims to examine the role of implant design on
Outcomes in arthroplasty have 3 general sources of variability: the patient, the prosthesis, and the medical-surgical-rehab. services. There are numerous factors that can contribute to earlier-than-usual clinical failure of a TKA (failure = need for revision). There are intense debates regarding design and material factors. There are technical factors such as misalignment, soft tissue imbalance, and inadequate fixation. The greatest source of variability in the outcome equation is, however, the patient. In cohort studies, the amount and type of
We conducted a longitudinal study including patients with the same type of primary hybrid total hip replacement and evaluated
To complement subjective patient-reported outcome measures, objective assessments are needed. Activity is an objective clinical outcome which can be measured with wearable activity monitors (AM). AM's have been validated and used in joint arthroplasty patients to count postures, walking or transfers. However, for demanding patients such as after sports injury, running is an important activity to quantify. A new AM algorithm to distinguish walking from running is trialed in this validation study. Test subjects (n=9) performed walking and running bouts of 30s duration on a treadmill at fixed speeds (walking: 3, 4, 5, 7km/h, running: 5, 7, 9, 12, 15km/h) and individually preferred speeds (slow, normal, fast, maximum, walk/run transition). Flat and inclined surfaces (8%, 16%), different footwear (soft, hard, barefoot) and running styles (hind/fore-foot) were tested. An AM (3D accelerometer) was worn on the lateral thigh. Previously validated algorithms to classify all gait as walking were adapted to differentiate running from walking, the main criterium being vertical acceleration peaks exceeding 2g within each subsequent 2s-interval. Independently annotated video observation served as reference.Background
Methods
There is increased awareness of the health benefits of regular exercise, and quantifying daily activity has become popular. Consequently, there are an increasing number of devices for measuring physical activity. Healthcare professionals and the general public should know the accuracy and limitations of these devices to better determine which ones suit their needs. Ten devices were tested: one ankle-based device, StepWatch™ Activity Monitor (SAM); two wrist-based devices, FitBit Force™ and Nike+ Fuelband SE; seven waist-based devices, Omron HJ-321 Pedometer, Sportline 340 Strider Pedometer, FitBit One™, Samsung Galaxy S4 utilizing the two most popular applications (Runtastic and Noom Walk), and the iPhone 5 utilizing the two most popular applications (Runtastic and ARGUS). Thirty healthy volunteers, mean age 25.6 years (range 20–30) and mean body mass index 23.5 (range 17.3–29.0), completed the following protocol: (1) walk briskly around a 400-M track simulating community ambulation (2) jog around a 400-M track (3) walk slowly for 10-M, approximating household or workplace pace (4) ascend 10 steps, and (5) descend 10 steps. Each subject completed 3 trials for each task. Manual count was the gold standard (Champion Sports Tally Counter). Accuracy and mean percent error were calculated to demonstrate overall performance and any tendencies for over or undercounting. An Aggregate Accuracy Score was calculated using the mean accuracy of each activity and multiplying by a corresponding weighted value for a prototypical person: 400-M walk represents community ambulation, weighted 40%; 10-M walk represents household and workplace ambulation, weighted 30%; 400-M jog represents jogging or running, weighted 20%; Stair Ascent and Descent represent community and household stair use, weighted 5% each. Device rank based on the Aggregate Accuracy Score was #1 FitBit One™ (98.0%), #2 Omron HJ-321 (97.0%), #3 StepWatch™ Activity Monitor (93.3%), #4 Runtastic Google App (92.7%), #5 Runtastic iPhone App (89.5%), #6 Fitbit Force™ (88.2%), #7 Argus iPhone App (87.2%), #8 Sportline 340 Strider (85.7%), #9 Nike Fuelband (76.1%), #10 Noom Walk Google App (75.9%). The FitBit One™ was 99.5%, 97.8%, 96.7%, 94.3%, and 96.9% accurate in the 400-M walk, 10-M walk, 400-M jog, 10 stair ascent, and 10 stair descent, respectively. The Omron HJ-321 was 99.3%, 94.9%, 97.9%, 92.2%, and 91.3% accurate, respectively. The SAM performed well (>95% accurate) in all activities except one, consistently undercounting the 400-M jog by about 25% (95% CI: −27.2% – −23.9%). The FitBit ForceTM and Nike+ Fuelband SE wrist devices were ≥90% accurate in the 400-M walk and 400-M jog, but ≤83% accurate for all other activities. Three of the 4 smartphone applications were >97% accurate in the 400-M walk, 1 of 4 was 97.3% accurate in the 400-M jog, but all devices performed poorly (≤90% accurate) for all other activities. Smartphones are very popular, but current technology is less accurate for measuring overall daily activity. The relatively inexpensive FitBit One™ and Omron HJ-321 pedometer are highly accurate for quantifying a variety of activities, including running. The StepWatch™ Activity Monitor performs well in lower cadence, but consistently undercounted jogging. Wrist-based activity devices are not as accurate as waist-based. Next generation technologies, including smartphones, should undergo accuracy testing before recommending them for daily use.
Evidence with respect to conventional hip arthroplasties suggests that device wear is related to
It is known that activity level correlates with wear in total joint arthroplasty. UCLA activity score surveys were sent to four hundred and sixty-seven knee and hip arthroplasty patients with good/excellent clinical outcomes as determined by one-year postoperative Knee Society (KSS) and Harris Hip (HHS) scores. The UCLA activity score was correlated with clinical outcomes and demographic data. Average UCLA score was 6.2 for hips, 6.3 for knees, indicating moderate activity levels. Hip arthroplasty UCLA score significantly correlated with age, gender and one-year Oxford score. Knee arthroplasty UCLA score significantly correlated with gender, one-year functional KSS and Oxford score. Arthroplasty patients are often warned to avoid high level activities for fear of implant loosening, failure or increased polyethylene wear. Patients with good/excellent clinical outcomes may however be inclined to participate in higher demand activities. There is need for specific information regarding patient profile and activity level following TJR. Current recommendations for activity among TJR patients may not be justified. Longer-term follow-up will elucidate specific activities which may be permissible or detrimental to implant survivorship. Survey response rate was 70.2% among THA patients at mean 40.7months. Mean UCLA score was 6.2/10, indicating moderate activity. Mean outcome scores; one-year HHS 94.8, Oxford 6.6. UCLA score significantly correlated with age, gender and one-year Oxford. Survey response rate was 81.8% among TKA patients at mean 36.6months. Mean UCLA score was 6.3/10, indicating moderate activity. Mean outcome scores; one-year KSS clinical 95.9, KSS function 95, Oxford 18.2. UCLA score significantly correlated with gender, one-year KSS function and Oxford. No significant differences among clinical outcomes and survey non-respondents. UCLA activity score survey of two hundred and twenty-five primary TKA and two hundred and forty-two primary THA patients. Patients abstracted from prospective database and pre-selected for good/excellent outcomes based on KSS and HHS at one-year. Clinical outcomes included Oxford Hip/Knee scores. UCLA, demographics and clinical outcomes correlated using Pearson’s correlation. UCLA scores indicate the average TJR patient maintains a moderate activity level. Younger male patients with low Oxford can be expected to participate in higher level activities. One THA patient underwent subsequent revision despite moderate activity level.
There is evidence that high levels of physical
activity following arthroplasty of the hip or knee can lead to early revision.
However, the term ‘highly active’ is not well defined. A validated ankle accelerometer was used to quantify activity
in 13 patients, who had undergone a total of 20 arthroplasties of
the lower limbs and who had active lifestyles. The assessments were
taken at a mean of 8.7 years post-operatively (1.8 to 15.8). The mean gait cycles per day was 8273 (5964 to 12 557), which
extrapolates to 3.0 million cycles per year (cpy) (2.2 to 4.6).
The mean percentage of time spent in high activity mode was 4.3%,
or about one hour per day. The mean percentage of cycles in high
activity was 40%. Based on these data, we propose the following definitions of
high activity: >
3 million cpy; one hour per day in high activity
mode; 40% of cycles in high activity mode. Extrapolating the sample of activity over the time since operation,
the mean cycles per arthroplasty was 25.2 million, with a maximum
of 44.1 million. No joint has been revised, or shows evidence of
impending failure. Cite this article:
Aims. The direct anterior (DA) approach has been associated with rapid patient recovery after total hip arthroplasty (THA) but may be associated with more frequent femoral complications including implant loosening. The objective of this study was to determine whether the addition of a collar to the femoral stem affects implant migration,
Intramedullary nails (IMNs) are the current gold standard for treatment of long bone diaphyseal and selected metaphyseal fractures. Their design has undergone many revisions to improve fixation techniques, conform to the bone shape with appropriate anatomic fit, reduce operative time and radiation exposure, and extend the indication of the same implant for treatment of different fracture types with minimal soft tissue irritation. The IMNs are made or either titanium alloy or stainless steel and work as load-sharing internal splints along the long bone, usually accommodating locking elements – screws and blades, often featuring angular stability and offering different configurations for multiplanar fixation – to secure secondary fracture healing with callus formation in a relative-stability environment. Bone cement augmentation of the locking elements can modulate the construct stiffness, increase the surface area at the bone-implant interface, and prevent cut-through of the locking elements. The functional requirements of IMNs are related to maintaining fracture reduction in terms of length, alignment and rotation to enhance fracture healing. The load distribution during
The 10 year survivorship of THR is generally over 95%. However, the incidence of revision is usually higher in year one. The most common reason being dislocation which at least in part is driven by inadequate range of motion (ROM) leading to impingement, subluxation and ultimately dislocation which is more frequently posterior. ROM is affected by
Smartphones are often equipped with inertial sensors capable of measuring individuals' physical activities. Their role in monitoring the
PROBLEM. Since the COVID-19 pandemic of 2020, there has been a marked rise in the use of telemedicine to evaluate patients following total knee arthroplasty (TKA). Telemedicine is helpful to maintain patient contact, but it cannot provide objective functional TKA data. External monitoring devices can be used, but in the past have had mixed results due to patient compliance and data continuity, particularly for monitoring over numerous years. This novel stem is a translational product with an embedded sensor that can remotely monitor
Abstract. Aims. Whilst short and mid-term activity levels after a Total Knee Replacement (TKR) have been reported in the literature; there is an over simplification of the reporting and longer-term activity levels are unknown. The aim of this study was to map the long-term trajectories of
Hip resurfacing arthroplasty (HRA) became a popular procedure in the early 90s because of the improved wear characteristic, preserving nature of the procedure and the optimal stability and range of motion. Concerns raised since 2004 when metal ions were seen in blood and urine of patients with a MoM implant. Design of the prosthesis, acetabular component malpositioning, contact-patch-to-rim distance (CPR) and a reduced joint size all seem to play a role in elevated metal ion concentrations. Little is known about the influence of physical activity (PA) on metal ion concentrations. Implant wear is thought to be a function of use and thus of
Background. The impact of a
The course of secondary fracture healing typically consists of four major phases including inflammation, soft and hard callus formation, and bone remodeling. Callus formation is promoted by mechanical stimulation, yet little is known about the healing tissue response to strain stimuli over shorter timeframes on hourly and daily basis. The aim of this study was to explore the hourly, daily and weekly variations in bone healing progression and to analyze the short-term response of the repair tissue to well-controlled mechanical stimulation. A system for continuous monitoring of fracture healing was designed for implantation in sheep tibia. The experimental model was adapted from Tufekci et al. 2018 and consisted of 3 mm transverse osteotomy and 30 mm bone defect resulting in an intermediate mobile bone fragment in the tibial shaft. Whereas the distal and proximal parts of the tibia were fixed with external fixator, the mobile fragment was connected to the proximal part via a second, active fixator. A linear actuator embedded in the active fixator moved the mobile fragment axially, thus stimulating mechanically the tissue in the osteotomy gap via well-controlled displacement being independent from the sheep's functional weightbearing. A load sensor was integrated in the active fixation to measure the force acting in the osteotomy gap. During each stimulation cycle the displacement and force magnitudes were recorded to determine in vivo fracture stiffness. Following approval of the local ethics committee, experiments were conducted on four skeletally mature sheep. Starting from the first day after surgery, the daily stimulation protocols consisted of 1000 loading events equally distributed over 12 hours from 9:00 to 21:00 resulting in a single loading event every 44 seconds. No stimulation was performed overnight. One animal had to be excluded due to inconsistencies in the load sensor data. The onset of tissue stiffening was detected around the eleventh day post-op. However, on a daily basis, the stiffness was not steadily increasing, but instead, an abrupt drop was observed in the beginning of the daily stimulations. Following this initial drop, the stiffness increased until the last stimulation cycle of the day. The continuous measurements enabled resolving the tissue response to strain stimuli over hours and days. The presented data contributes to the understanding of the influence of
Hemiarthroplasty (HA) and total hip arthroplasty (THA) have both been well described as effective methods of management for displaced femoral neck fractures in the elderly. THA has superior functional outcomes and lower long-term revision rates, while HA is associated with lower dislocation rates and faster operative times. While HA remains an appropriate management option in low-demand patients, it is commonly complicated by acetabular erosion. However, there is no consensus about the preferred method of treatment in self-sufficient, physically active patients with normal cognition. The aim of this study was to evaluate the impact of age in geriatric patients with acetabular wear after bipolar HA. We retrospectively reviewed the records of all cases of femoral neck fractures treated with bipolar HA in our institution, during the period 2013 – 2020. According to the age at the time of fracture, patients were separated in 3 groups: Group A (age 70 – 75), group B (age 75 – 80) and group C (age > 80). Acetabular wear was defined as failure of the acetabulum, which needed revision to THA. A total of 1410 patients (861 females and 549 males, mean age 77,2 years) were included in the study. 359 patients were included in Group A, 592 in Group B and 459 in Group C. Mean follow-up was 3.2 years. There were no significant differences in sex distribution, injury side, fracture pattern, BMI, ASA score, bipolar head diameter and leg length discrepancy among the 3 groups. The incidence of acetabular wear and need for revision to THA was 6.13%, 4.22% and 1.96% respectively (p = 0.009). The higher rate of acetabular wear in patients less than 75 years suggests that THA is a more viable option for these patients. In group 75–80 years old decision for HA or THA should be made upon