Aims. Dual-mobility acetabular components (DMCs) have improved total hip arthroplasty (THA) stability in femoral neck fractures (FNFs). In osteoarthritis, the direct anterior approach (DAA) has been promoted for improving early functional results compared with the posterolateral approach (PLA). The aim of this study was to compare these two approaches in FNF using DMC-THA. Methods. A prospective continuous cohort study was conducted on patients undergoing operation for FNF using DMC by DAA or PLA. Functional outcome was evaluated using the Harris Hip Score (HHS) and Parker score at three months and one year. Perioperative complications were recorded, and radiological component positioning evaluated. Results. There were 50 patients in the DAA group and 54 in the PLA group. The mean HHS was 85.5 (SD 8.8) for the DAA group and 81.8 (SD 11.9) for the PLA group (p = 0.064). In all, 35 patients in the DAA group and 40 in the PLA group returned to their pre-fracture Parker score (p = 0.641) in both groups. No statistically significant differences between groups were found at one year regarding these two scores (p = 0.062 and p = 0.723, respectively). The DAA was associated with more intraoperative complications (p = 0.013). There was one dislocation in each group, and four revisions for DAA and one for PLA, but this difference was not statistically significant. There were also no significant differences regarding blood loss, length of stay, or operating time. Conclusion. In DMC-THA for FNF, DAA did not achieve better functional results than PLA, either at three months or at one year. Moreover, DAA presented an increased risk of intra-operative complications. Cite this article: Bone Joint J 2024;106-B(5 Supple B):133–138

Ankle fractures represent the third most common fragility fracture seen in elderly patients following hip and distal radius fractures. Non-operative management of these see complication rates as high as 70%. Open reduction and internal fixation (ORIF) has complication rates of up to 40%. With either option, patients tend to be managed with a non-weight bearing period of six weeks or longer. An alternative is the use of a tibiotalocalcaneal (TTC) nail. This provides a percutaneous treatment that enables the patient to mobilise immediately. This case-series explores the efficacy of this device in a broad population, including the highly comorbid and cognitively impaired. We reviewed patients treated with TTC nail for acute ankle fractures between 2019 and 2022. Baseline and surgical data were collected. Clinical records were reviewed to record any post-operative complication, and post-operative mobility status and domicile. 24 patients had their ankle fracture managed with TTC nailing. No intra-operative complications were noted. There were six (27%) post-operative complications; four patients had loosening of a distal locking screw, one significant wound infection necessitating exchange of nail, and one pressure area from an underlying displaced fracture fragment. All except three patients returned to their previous domicile. Just over two thirds of patients returned to their baseline level of mobility. This case-series is one of the largest and is also one of the first to include cognitively impaired patients. Our results are consistent with other case-series with a favourable complication rate when compared with ORIF in similar patient groups. The use of a TTC nail in the context of acute, geriatric ankle trauma is a simple and effective treatment modality. This series shows acceptable complication rates and the majority of patients are able to return to their baseline level of mobility and domicile

Multiple studies have established an inverse relationship between ambient theatre temperatures and polymethyl methacrylate (PMMA) cement setting times. It is also known that allowing cement to equilibrate to ambient theatre temperatures restores expected setting characteristics. One overlooked entity is the transport and storage conditions of cement. This is important in tropical regions, where extreme temperature and humidity may cause rapid cement setting times, resulting in potentially significant intra-operative complications. This study investigated the relationship between extreme transport and storage conditions of Antibiotic Simplex cement (Stryker), and the effect on setting times at Cairns Hospital, Far North Queensland, Australia. Fifty units of cement were divided evenly into a control arm and four experimental arms. The experimental arms were designed to mimic potential transport and storage conditions. They included seven days of storage in a medication fridge, on the hospital loading dock, in a cane shed, and in a Toyota Landcruiser parked outdoors during January 2022. Humidity and temperature readings were recorded. The samples in each group were evenly distributed to equilibrate to theatre conditions for 1 hour and 24 hours. Setting time was recorded when a no. 15 scalpel blade was unable to mark the surface. All three ‘hot’ exposures setting times were significantly faster for both 1 hour (ρ=0.001) and 24 hours (ρ=0.024) equilibration times. The difference in setting times for the ‘cold’ exposure was not significant for either equilibration times (ρ=1). To our knowledge, this is the first study investigating cement setting times in tropical climates. Further studies are required to address the effect of these conditions on biomechanical strength of PMMA cement. We conclude that extreme heat and humidity during transport and storage have a statistically significant effect on cement setting times

Introduction. A significant burden of disease exists with respect to critical sized bone defects; outcomes are unpredictable and often poor. There is no absolute agreement on what constitutes a “critically-sized” bone defect however it is widely considered as one that would not heal spontaneously despite surgical stabilisation, thus requiring re-operation. The aetiology of such defects is varied. High-energy trauma with soft tissue loss and periosteal stripping, bone infection and tumour resection all require extensive debridement and the critical-sized defects generated require careful consideration and strategic management. Current management practice of these defects lacks consensus. Existing literature tells us that tibial defects 25mm or great have a poor natural history; however, there is no universally agreed management strategy and there remains a significant evidence gap. Drawing its origins from musculoskeletal oncology, the Capanna technique describes a hybrid mode of reconstruction. Mass allograft is combined with a vascularised fibula autograft, allowing the patient to benefit from the favourable characteristics of two popular reconstruction techniques. Allograft confers initial mechanical stability with autograft contributing osteogenic, inductive and conductive capacity to encourage union. Secondarily its inherent vascularity affords the construct the ability to withstand deleterious effects of stressors such as infection that may threaten union. The strengths of this hybrid construct we believe can be used within the context of critical-sized bone defects within tibial trauma to the same success as seen within tumour reconstruction. Methodology. Utilising the Capanna technique in trauma requires modification to the original procedure. In tumour surgery pre-operative cross-sectional imaging is a pre-requisite. This allows surgeons to assess margins, plan resections and order allograft to match the defect. In trauma this is not possible. We therefore propose a two-stage approach to address critical-sized tibial defects in open fractures. After initial debridement, external fixation and soft tissue management via a combined orthoplastics approach, CT imaging is performed to assess the defect geometry, with a polymethylmethacrylate (PMMA) spacer placed at index procedure to maintain soft tissue tension, alignment and deliver local antibiotics. Once comfortable that no further debridement is required and the risk of infection is appropriate then 3D printing technology can be used to mill custom jigs. Appropriate tibial allograft is ordered based on CT measurements. A pedicled fibula graft is raised through a lateral approach. The peroneal vessels are mobilised to the tibioperoneal trunk and passed medially into the bone void. The cadaveric bone is prepared using the custom jig on the back table and posterolateral troughs made to allow insertion of the fibula, permitting some hypertrophic expansion. A separate medial incision allows attachment of the custom jig to host tibia allowing for reciprocal cuts to match the allograft. The fibula is implanted into the allograft, ensuring nil tension on the pedicle and, after docking the graft, the hybrid construct is secured with multi-planar locking plates to provide rotational stability. The medial window allows plate placement safely away from the vascular pedicle. Results. We present a 50-year-old healthy male with a Gustilo & Anderson 3B proximal tibial fracture, open posteromedially with associated shear fragment, treated using the Capanna technique. Presenting following a fall climbing additional injuries included a closed ipsilateral calcaneal and medial malleolar fracture, both treated operatively. Our patient underwent reconstruction of his tibia with the above staged technique. Two debridements were carried out due to a 48-hour delay in presentation due to remote geographical location of recovery. Debridements were carried out in accordance with BOAST guidelines; a spanning knee external fixator applied and a small area of skin loss on the proximal medial calf reconstructed with a split thickness skin graft. A revision cement spacer was inserted into the metaphyseal defect measuring 84mm. At definitive surgery the external fixator was removed and graft fixation was extended to include the intra-articular fragments. No intra-operative complications were encountered during surgeries. The patient returned to theatre on day 13 with a medial sided haematoma. 20ml of haemoserous fluid was evacuated, a DAIR procedure performed and antibiotic-loaded bioceramics applied locally. Samples grew Staphylococcus aureus and antibiotic treatment was rationalised to Co-Trimoxazole 960mg BD and Rifampicin 450mg BD. The patient has completed a six-week course of Rifampicin and continues on suppressive Co-Trimoxazole monotherapy until planned metalwork removal. There is no evidence of ongoing active infection and radiological evidence of early union. The patient is independently walking four miles to the gym daily and we believe, thus far, despite accepted complications, we have demonstrated a relative early success. Conclusions. A variety of techniques exist for the management of critical-sized bone defects within the tibia. All of these come with a variety of drawbacks and limitations. Whilst acceptance of a limb length discrepancy is one option, intercalary defects of greater than 5 to 7cm typically require reconstruction. In patients in whom fine wire fixators and distraction osteogenesis are deemed inappropriate, or are unwilling to tolerate the frequent re-operations and potential donor site morbidity of the Masqualet technique, the Capanna technique offers a novel solution. Through using tibial allograft to address the size mismatch between vascularised fibula and tibia, the possible complication of fatigue fracture of an isolated fibula autograft is potentially avoidable in patients who have high functional demands. The Capanna technique has demonstrated satisfactory results within tumour reconstruction. Papers report that by combining the structural strength of allograft with the osteoconductive and osteoinductive properties of a vascularised autograft that limb salvage rates of greater than 80% and union rates of greater than 90% are achievable. If these results can indeed be replicated in the management of critical-sized bone defects in tibial trauma we potentially have a treatment strategy that can excel over the more widely practiced current techniques

Introduction/Aim. The NAVIO robotic-assisted TKA (RA-TKA) application received FDA clearance in May 2017. This semi-active robotic technique aims to improve the accuracy and precision of total knee arthroplasty. The addition of robotic-assisted technology, however, also introduces another potential source of surgery-related complications. This study evaluates the safety profile of NAVIO RA-TKA. Materials and Methods. Beginning in May 2017, the first 250 patients undergoing NAVIO RA-TKA were included in this study. All intra-operative complications were recorded, including: bleeding; neuro-vascular injury; peri-articular soft tissue injury; extensor mechanism complications; and intra-operative fracture. During the first 90 days following surgery, patients were monitored for any post-operative complications, including: superficial and deep surgical site infection; pin-tract infection; pin site fractures; peri-prosthetic fractures; axial or sagittal joint instability; axial mal-alignment; patello-femoral instability; DVT/PE; re-operation or re-admission due to surgical-related complications. Surgical technique and multi-modality pain management protocol was consistent for all patients in the study. A combined anesthetic technique was employed for all cases, including: low-dose spinal, adductor canal block and general anesthetic. Patients were mobilized per our institution's rapid recovery protocol. Results. No patients were lost to follow-up. During the study period, no intra-operative complications were recorded. Specifically, no complications related to the introduction of the high-speed burr associated with the NAVIO RA-TKA were noted. Within the 90-day follow-up period, there was one case of deep infection. One patient sustained a fall resulting in a peri-prosthetic femoral fracture, that occurred remote from the femoral pin tracts. No cases of axial or sagittal joint instability, axial mal-alignment, patello-femoral instability, pin site infections or fractures; or DVT/PE were identified. Four patients underwent manipulation under anesthesia. No other patients required a re-operation or re-admission due to surgical-related complications. Discussion/Conclusions. The initial experience with the NAVIO robotic assisted total knee arthroplasty has demonstrated excellent safety profile. Relative to known risks associated with total knee arthroplasty, no increased risk of peri-operative complications, re-operation or re-admission for surgical related complications was identified with the introduction of the NAVIO RA-TKA

Objectives. Few studies have assessed outcomes following non-metal-on-metal hip arthroplasty (non-MoMHA) revision surgery performed for adverse reactions to metal debris (ARMD). We assessed outcomes following non-MoMHA revision surgery performed for ARMD, and identified predictors of re-revision. Methods. We performed a retrospective observational study using data from the National Joint Registry for England and Wales. All non-MoMHAs undergoing revision surgery for ARMD between 2008 and 2014 were included (185 hips in 185 patients). Outcome measures following ARMD revision were intra-operative complications, mortality and re-revision surgery. Predictors of re-revision were identified using Cox regression. Results. Intra-operative complications occurred in 6.0% (n = 11) of the 185 cases. The cumulative four-year patient survival rate was 98.2% (95% CI 92.9 to 99.5). Re-revision surgery was performed in 13.5% (n = 25) of hips at a mean time of 1.2 years (0.1 to 3.1 years) following ARMD revision. Infection (32%; n = 8), dislocation/subluxation (24%; n = 6), and aseptic loosening (24%; n = 6) were the most common re-revision indications. The cumulative four-year implant survival rate was 83.8% (95% CI 76.7 to 88.9). Multivariable analysis identified three predictors of re-revision: multiple revision indications (hazard ratio (HR) = 2.78; 95% CI 1.03 to 7.49; p = 0.043); selective component revisions (HR = 5.76; 95% CI 1.28 to 25.9; p = 0.022); and ceramic-on-polyethylene revision bearings (HR = 3.08; 95% CI 1.01 to 9.36; p = 0.047). Conclusions. Non-MoMHAs revised for ARMD have a high short-term risk of re-revision, with important predictors of future re-revision including selective component revision, multiple revision indications, and ceramic-on-polyethylene revision bearings. Our findings may help counsel patients about the risks of ARMD revision, and guide reconstructive decisions. Future studies attempting to validate the predictors identified should also assess the effects of implant design (metallurgy and modularity), given that this was an important study limitation potentially influencing the reported prognostic factors. Cite this article: G. S. Matharu, A. Judge, D. W. Murray, H. G. Pandit. Outcomes following revision surgery performed for adverse reactions to metal debris in non-metal-on-metal hip arthroplasty patients: Analysis of 185 revisions from the National Joint Registry for England and Wales. Bone Joint Res 2017;6:405–413. DOI: 10.1302/2046-3758.67.BJR-2017-0017.R2

Intra-operative complications vary from extremely benign such as glenoid vault penetration to life and limb threatening for example brachial artery injury. Most intra-operative complications can be avoided with careful pre-operative planning, anticipation, and execution. However, even the best planning and execution including fluoroscopic guided reaming cannot prevent all complications. The following intra-operative complications will be discussed in detail in regards to both prevention and management: Glenoid vault penetration, Glenoid component malposition - reverse and primary, Glenoid fracture - reverse and primary, Humeral component malposition - reverse and primary, and Humeral fracture - reverse and primary

Between 1976 and 2004, 38 revision arthroplasties (35 patients) were performed for aseptic loosening of the humeral component. The mean interval from primary arthroplasty to revision was 7.1 years (0.4 to 16.6). A total of 35 shoulders (32 patients) were available for review at a mean follow-up of seven years (2 to 19.3). Pre-operatively, 34 patients (97%) had moderate or severe pain; at final follow-up, 29 (83%) had no or only mild pain (p < 0.0001). The mean active abduction improved from 88° to 107° (p < 0.01); and the mean external rotation from 37° to 46° (p = 0.27). Excellent or satisfactory results were achieved in 25 patients (71%) according to the modified Neer rating system. Humeral components were cemented in 29, with ingrowth implants used in nine cases. There were 19 of standard length and 17 were longer (two were custom replacements and are not included). Bone grafting was required for defects in 11 humeri. Only two glenoid components were left unrevised. Intra-operative complications included cement extrusion in eight cases, fracture of the shaft of the humerus is two and of the tuberosity in four. There were four re-operations, one for recurrent humeral loosening, with 89% survival free of re-operations at ten years. Revision surgery for aseptic loosening of the humeral component provides reliable pain relief and modest improvement of movement, although there is a substantial risk of intra-operative complications. Revision to a total shoulder replacement gives better results than to a hemiarthroplasty

Seniors make up 16.9 percent of the Canadian population. Furthermore, the number of Canadians who are 65 years or older is increasing at an average rate of 20 percent every 5 years. In 2017, Sing etal reported that there is an increasing number of patients undergoing degenerative scoliosis surgery with the largest increase attributed to patients aged 65–69 years followed by those aged 70–74 years. Therefore, the purpose of this study is to assess the effectiveness of undergoing spinal surgery to correct degenerative spinal scoliosis in the ever-growing number of elderly patients. We hypothesize that age is not an independent prognostic factor of patients' outcomes followings degenerative scoliosis surgery. A retrospective review of prospectively collected data within the Canadian Spine Outcome and Research Network (CSORN) was conducted. Data was analyzed using IBM-SPSS. ANOVA was used to analyze continuous variables while Chi Square test was used to analyze categorical variables. Significance level was p < 0.05. There were 165 patients identified from the registry who met the inclusion criteria, 94 patients (57 %) were female. There were 102 (61.8 %) patients who were 65 years or older. The overall average age was 66.6 years (range 35–84, SD 8.6). There were 27 intra-operative complications, 44 peri-operative complications and 18 post operative complications. There was no statistically significant difference between the two age groups with regards to risk of developing intra-operative, perioperative and post operative complications. Patients who underwent degenerative scoliosis surgery reported an average improvement of 2.95±3.32, 3.64±3.50, 16.84±20.44 points on the back-pain scale, leg pain scale and the Oswestry Disability Index (ODI) respectively, there was no statistically significant differences in these measures between the two age groups. As the number of patients undergoing degenerative scoliosis surgery increases, clinicians will need to determine which factors will significantly impact patients' outcomes following surgery. This study shows that age is not an independent prognostic factor when it comes to patients' outcomes following degenerative scoliosis surgery. In the future, research should examine the impact of age in conjunction with factors such as frailty, comorbidities and functional status on patient outcomes

Aims. To determine the outcomes following revision surgery of metal-on-metal hip arthroplasties (MoMHA) performed for adverse reactions to metal debris (ARMD), and to identify factors predictive of re-revision. Patients and Methods. We performed a retrospective observational study using National Joint Registry (NJR) data on 2535 MoMHAs undergoing revision surgery for ARMD between 2008 and 2014. The outcomes studied following revision were intra-operative complications, mortality and re-revision surgery. Predictors of re-revision were identified using competing-risk regression modelling. Results. Intra-operative complications occurred in 40 revisions (1.6%). The cumulative five-year patient survival rate was 95.9% (95% confidence intervals (CI) 92.3 to 97.8). Re-revision surgery was performed in 192 hips (7.6%). The cumulative five-year implant survival rate was 89.5% (95% CI 87.3 to 91.3). Predictors of re-revision were high body mass index at revision (subhazard ratio (SHR) 1.06 per kg/m. 2 . increase, 95% CI 1.02 to 1.09), modular component only revisions (head and liner with or without taper adapter; SHR 2.01, 95% CI 1.19 to 3.38), ceramic-on-ceramic revision bearings (SHR 1.86, 95% CI 1.23 to 2.80), and acetabular bone grafting (SHR 2.10, 95% CI 1.43 to 3.07). These four factors remained predictive of re-revision when the missing data were imputed. Conclusion. The short-term risk of re-revision following MoMHA revision surgery performed for ARMD was comparable with that reported in the NJR following all-cause non-MoMHA revision surgery. However, the factors predictive of re-revision included those which could be modified by the surgeon, suggesting that rates of failure following ARMD revision may be reduced further. Cite this article: Bone Joint J 2017;99-B:1020–7

Introduction and Aims: The use of porous coated femoral stems in revision hip arthroplasty has been associated with a high rate of complications including femoral fracture, femoral perforation and eccentric reaming. The purpose is to determine if using a distally slotted-fluted femoral stem is associated with lower incidence of the above three intra-operative complications. Method: The intra-operative complications of 175 cementless revision total hip arthropasties (THA) using a distally slotted-fluted femoral stem were reviewed. Three categories of complications were recorded: femoral fracture, femoral perforation and eccentric reaming. Radiographic evaluation was based on standard antero-posterior and lateral views of the hip joint performed in the intra-operative or immediate post-operative period. Statistical analysis for factors associated with complications was performed using the chi-square test. Results: Intra-operative complications occurred in 16 patients (9.1%). There was no statistically significant association between complication rate and type of surgical approach, stem length, stem diameter, or host bone quality. The complication rate was significantly lower than the 44% total complication rate previously reported utilising a long, solid, extensively coated revision stem without a slot or flute (p< .01). These results are consistent with laboratory testing, which revealed significantly lower bone strains at the isthmus when inserting a long cementless revision stem with a slot and flute compared to a solid fully coated stem of identical geometry. Conclusion: The use of a distally slotted fluted porous coated femoral stem in revision hip arthroplasty results in a dramatically lower complication rate compared to rates previously reported for solid porous stems. These results strongly support the continued use of such a prosthesis for revision THA

The direct anterior (DA) approach for total hip arthroplasty (THA) has become increasingly popular in North America. With experience, exposure of both the acetabulum and femur can be achieved similar to those in other approaches. In cases of difficult femoral exposure, the conjoint tendon of the short external rotators can be released to improve visualisation. The effect of conjoint tendon release has not been previously explored in regards to overall outcomes, or postoperative pain. The goal of this study was to evaluate 1) the length of stay and inpatient pain medication requirements of patients undergoing DA THA on the basis of conjoint tendon release, and 2) whether conjoint tendon release influenced functional outcomes. We conducted a retrospective chart review of all cases of primary DA THAs conducted by single surgeon at LHSC University between August 2012 and July 2015. Patient demographics, bilateral THA cases, intraoperative conjoint tendon or other soft tissue releases, intra-operative complications, and length of stay (LOS) were evaluated for all cases. Inpatient pain medication data was available for all cases from Apr 2014 onwards. One year functional outcome scores, including WOMAC and Harris Hip Scores (HHS), were evaluated for all cases before August 2014. Six-week and three-month functional outcome scores were available and evaluated for a subset of cases. All data was analysed with multiple linear regression. Three hundred and twelve cases of primary DA THAs were identified, of which 29 were concurrent bilateral THAs. One hundred and eighty cases included a conjoint tendon release, while 29 cases had other soft tissue releases (tensor fascia lata). Mean age and BMI were 64.9±11.5 years and 29.0±5.3 respectively. Mean LOS was 1.3±1.1 days, with age, bilateral THA, non-conjoint tendon soft tissue release, and intra-operative complications being predictive of LOS (p<0.05). Pain medication data was available for 107 cases, of which 11 were concurrent bilateral THAs. Sixty four cases included a conjoint tendon release, while one case had other soft tissue releases. Mean daily morphine equivalent dose (MED) narcotic use was 43.2±48.2mg, with age being a negative predictor of narcotic use (p<0.05). BMI was a negative predictor of one year HHS pain, HHS total, and all WOMAC subcategory scores, while age was a negative predictor of one year HHS function and HHS total scores (p<0.05). None of the variables were predictive of six-week and three-month functional outcome scores. Conjoint tendon release was not predictive of LOS, inpatient pain medication requirements, or outcome scores. Conjoint tendon release did not affect postoperative pain, LOS, or functional outcomes. Given that conjoint release improves femoral exposure, intraoperative thresholds for conjoint release should be low. The effect of intraoperative release of other soft tissues is uncertain, as this increased LOS but not postoperative pain

Aim. Post traumatic distal tibia osteomyelitis (DTOM) with an upper ankle joint involvement is a serious complication after primary osteosynthesis and can be a nightmare for the patient and the surgeon as well. Our aim was to identify mayor complications during treatment and to find the way to prevent or treat them. Method. It is a retrospective analysis of eight patients with DTOM and an upper ankle joint involvement treated in our institution from 2012 to 2018. The average size of a bone defect after a debridement was 9 centimeters (4–15). Patients were treated in two stages. First stage was segmental bone resection, external fixation and soft tissue envelope reconstruction if necessary. At second stage a distraction frame was applied and proximal corticotomy performed. In all but one case a circular frame was used. Results. We have had one major intra-operative complication, an injury of arteria tibialis posterior during the corticotomy procedure. Except in one patient we did not observe major problems with pin-track infections. Despite bone-grafting in all patients, we observed three nonunions of docking site. We treated them by external fixator in two and retrograde intramedullar nail in one case. In two patient the distraction callus was weak. We had to bone graft and secure the callus with a plate in one and use a retrograde reamed intramedullar nail in second patient. We have observed two callus fracture after removal of the frame. A surgery was needed for both because of the deformation. The first patient was treated by new external frame, the second by retrograde reamed intramedullar nail. Conclusions. Callus distraction is a valuable option to treat a bone defect. The procedure has many possible problems and complications, especially during treatment of defects larger than six centimeters. It is very difficult for patients to tolerate a frame more than one year. We have found the use of an intramedullar tibial nail inserted in a retrograde way as a helpful option not just to shorten the time of external frame, but in combination with reaming also to accelerate the healing of the distraction callus and the upper ankle joint arthrodesis as well

Introduction. Revision TKA can be a difficult and complex procedure. Bone quality is commonly compromised and stem fixation is required in many cases to provide stability of the prosthetic construct. However, utilization of diaphyseal engaging stems adds complexity to the case and can present technical challenges to the surgeon. Press fit metaphyseal sleeves can provide stable fixation of the construct without the need for stems and allows for biologic ingrowth of the prosthesis. Metaphyseal sleeves simplify the revision procedure by avoiding the need to prepare the diaphysis for stems, alleviating the need for offset stems and decreasing the risk of intra-operative complications. The ability to obtain biologic fixation in the young patient is also appealing. This study reports on the author's mid-term experience with this novel technique. Methods. Between May 2007 and June 2009 the author performed 17 revisions TKA that utilized press-fit metaphyseal sleeves without stems on either the tibial side of the joint, the femoral side of the joint or both. Twenty six sleeves were implanted altogether (13 tibial, 13 femoral). Patients were limited to touch down weight bearing for 6 weeks post-operatively. The patients were followed prospectively with clinical and radiographic follow-up at routine intervals. Results. Average clinical and radiographic F/U for the cohort was 57 months (range 30 – 77). Fourteen of seventeen patients had a minimum of 4 years F/U. Average age at the time of surgery was 58 years (range 46–72) and average BMI was 32.4. Indications for the index revision included nine knees with aseptic loosening and / or osteolysis, two knees for septic loosening, two knees for instability and 4 knees for pain / stiffness or other causes. ROM at pre-op and latest F/U averaged 2–108 deg and 0–117 deg respectively. Knee Society Scores at pre-op and latest F/U averaged 35 and 86 respectively (range 57–100). Survivorship analysis revealed 25 of 26 sleeves (96%) to still be in situ at latest F/U. One tibial sleeve was revised at 30 months for septic loosening. Radiographic analysis revealed 22 of the remaining 25 sleeves (88%) to be ingrown. Two tibial sleeves and one femoral sleeve exhibit stable fibrous fixation and are asymptomatic. Conclusions. Press-fit metaphyseal sleeves utilized without stems appear to provide excellent stability of the revision TKA construct at mid-term F/U. Biologic fixation appears to be present in the majority of cases. This ability to obtain reliable osseointegration of the revision construct is appealing, especially in the younger revision patient. The sleeves have proven easy to use and there have been no intra-operative complications. This technique appears to provide a simple, but robust alternative when compared to revision TKA with stems in appropriate cases. Further F/U of this cohort is necessary to evaluate long term results

Background. Several recent reports have documented high frequency of malpositioned acetabular components, even amongst high volume arthroplasty surgeons. Robotic assisted total hip arthroplasty (THA) has the potential to improve component positioning; however, to our knowledge there are no reports examining the learning curve during the adoption of robotic assisted THA. Purpose. The purpose of this study was to examine the learning curve of robotic assisted THA as measured by component position, operative time, intra-operative technical problems, and complications. Methods. The first 105 robotic-assisted THAs performed by a single surgeon with a posterior approach from June 2011 to August 2013 patients were divided into three groups based on the order of surgery. Group A was cases 1–35, group B 36–70 and group C 71–105. Component position, operative time, intra-operative technical problems, and intra-operative complications were recorded. Results. There was no significant difference between groups A, B, and C for BMI or age (Figure 1). Gender was different between groups with 20 males in group A, 9 in group B, and 16 in group C (p < 0.05). There was no difference for mean acetabular inclination, acetabular anteversion, or leg length discrepancy between groups as experience increased (p > 0.05) (Figure 2). The average operative time for groups A, B, and C was 79.8 ± 27 min, 63.2 ± 14.2 min, and 69.4 ± 16.3 min respectively (p = 0.02). The cumulative number of outliers was two for the Lewenick safe zone and six for the Callanan safe zone. Figure 3 displays acetabular component positioning in relation to previously documented safe zones for the three groups. The risk of having an acetabular component outside of Lewenick's safe zone was not different between groups (p = 0.60). The risk of having an acetabular component outside of Callanan's safe zone decreased after group A and was statistically significant (p = 0.02). Overall there were nine (9%) intra-operative technical problems and complications. In group A there were three complications: one loosened femoral array, one loosened pelvic array, and one cup that appeared erroneous according to the navigation system. In group B there was one femoral calcar fracture treated with a cerclage wire, one loosened femoral array, and one intra-operative delay. In group C there were three technical problems, all a loosened femoral array. There was no difference in the overall number of intra-operative complications between groups (p = 1.0). Conclusion. A learning curve was observed, as a decreased incidence of acetabular component outliers and decreased operative time were noted with increased experience. Satisfactory acetabular component positioning and leg length matching were found throughout the learning curve of robotic assisted total hip arthroplasty, with very few outliers in either category. Based on these findings, we conclude that there is a learning curve of approximately 35 cases in robotic-assisted total hip arthroplasty

Revision of a cemented hemiarthroplasty of the hip may be a hazardous procedure with high rates of intra-operative complications. Removing well-fixed cement is time consuming and risks damaging already weak bone or perforating the femoral shaft. The cement-in-cement method avoids removal of intact cement and has shown good results when used for revision total hip arthroplasty (THA). The use of this technique for the revision of a hemiarthroplasty to THA has not been previously reported. A total of 28 consecutive hemiarthroplasties (in 28 patients) were revised to a THA using an Exeter stem and the cement-in-cement technique. There were four men and 24 women; their mean age was 80 years (35 to 93). Clinical and radiographic data, as well as operative notes, were collected prospectively and no patient was lost to follow-up. Four patients died within two years of surgery. The mean follow up of the remainder was 70 months (25 to 124). Intra-operatively there was one proximal perforation, one crack of the femoral calcar and one acetabular fracture. No femoral components have required subsequent revision for aseptic loosening or are radiologically loose. . Four patients with late complications (14%) have since undergone surgery (two for a peri-prosthetic fracture, and one each for deep infection and recurrent dislocation) resulting in an overall major rate of complication of 35.7%. The cement-in-cement technique provides reliable femoral fixation in this elderly population and may reduce operating time and rates of complication. Cite this article: Bone Joint J 2015;97-B:1623–7

The treatment of massive chronic tears is problematic. The re-tear rate following surgery for extensive cuff tears remains high, and there is little consensus regarding optimum treatment. To investigate the outcome of a cohort of patients who had open repair of an extensive cuff tear using the Leeds Kuff patch as an augment. A retrospective cohort study of consecutive patients with a massive cuff tear who had surgery in our regional elective orthopaedic centre over a two year period from January 2015 to Dec 2016. All patients followed identical rehabilitation protocols, supervised by physiotherapists with an interest in the shoulder. Outcomes assessment was undertaken at a minimum of 12 months by a registrar or physiotherapist who was not part of the treating team. Pre-op data collection included; range of motion, pain score, Oxford shoulder score (OSS), assessment of muscle atrophy on MRI. Data collection was completed in 15 patients. The mean age was 62 yrs (56 – 75). The mean pre-op OSS was 22, improving to a mean of 43. The range of motion and pain score improved. There were no intra-operative complications. One patient required a second surgery for evacuation of a haematoma at 10 days post op. One patient had an obvious re-tear at 4 months. Open rotator cuff repair with synthetic Kuff patch augmentation for chronic degenerative tears appears worthwhile when assessed at 12 months and they continuous to improve even at 18 months. This treatment method may be a useful option for patients > 70 years old

INTRODUCTION. Unicompartmental knee arthroplasty (UKA) allows replacement of a single compartment in patients who have isolated osteoarthritis as a minimally invasive procedure. However, limited visualization of the surgical site provides challenges in ensuring accurate alignment and placement of the prosthesis. With robot-assisted surgery, correct implant positioning and ligament balancing are obtainable with increased accuracy. To date, there has not been a large series reported in the literature of UKAs performed with robotic assistance. The aim of this study was to examine the clinical outcomes of robot-assisted UKA patients. METHODS. 510 patients who underwent robotic-assisted UKA between July 2008 and June 2010 were identified (average age 63.7 years, range: 22 to 28 years). Clinical outcomes were evaluated using the Oxford Knee Score (OKS) and patients without recent follow-up were phoned. Revision rate and time to revision were also examined. RESULTS. Average length of stay was 1.4 days (range: 1 to 7 days). There was minimal blood loss with most procedures. There were two intra-operative complications, both in early patients in the series. The first intra-operative complication was broken alignment pins in both the femur and tibia. In the second complication, preparation was finished manually with a burr due to registration problems with the software. Both patients were doing well at most recent follow up and neither experienced further complications. At latest clinical follow-up, patients reported a mean OKS of 36.1 + 9.92. The revision rate was 2.5% with 13 patients either converted from an inlay to onlay prosthesis or conversion to TKA. The most common indication for revision was tibial component loosening, followed by progression of arthritis. One patient was revised due to infection. Mean time to revision was 9.55 + 5.48 months (range: 1 to 19 months). CONCLUSION. UKA with a robotic system provides good pain relief and functional outcomes at short-term follow-up. Ensuring correct component alignment and ligament balancing increases the probability of a favorable outcome. Proper patient selection for appropriate UKA candidates remains an important factor for successful outcomes. In combination with robotic assistance there can be a reduction in many of the failures seen with early systems

Intramedullary devices have been used since 1989 for fractures around the trochanter. Standard PFN has been shown to be one of the stable and successful intramedullary devices for pertrochanteric fractures. In order to minimise the intra-operative complications, small PFN has been designed to fit the Asian femora. Before performing a clinical documentation series, the authors with the computer assisstance performed virtual templating of 60 asian femora. After standardising the magnification of the radiograph with that of the template, best possible fit of the latter was achevied. Various parameters such as:. Width of the remaining neck from the surface of femoral neck screw and hip pin. Height of the proximal end of the nail from the tip of greater trochanter. The distance between the actual and proposed take-off point of medio-lateral angulation. Width of intramedullary canal at distal end of the nail were measured. After analysis of the measurements, we propose to further modify the small PFN in order to get best fit and minimal intra-operative complications

Using data from the Norwegian Hip Fracture Register, 8639 cemented and 2477 uncemented primary hemiarthroplasties for displaced fractures of the femoral neck in patients aged > 70 years were included in a prospective observational study. A total of 218 re-operations were performed after cemented and 128 after uncemented procedures. Survival of the hemiarthroplasties was calculated using the Kaplan-Meier method and hazard rate ratios (HRR) for revision were calculated using Cox regression analyses. At five years the implant survival was 97% (95% confidence interval (CI) 97 to 97) for cemented and 91% (95% CI 87 to 94) for uncemented hemiarthroplasties. Uncemented hemiarthroplasties had a 2.1 times increased risk of revision compared with cemented prostheses (95% confidence interval 1.7 to 2.6, p < 0.001). The increased risk was mainly caused by revisions for peri-prosthetic fracture (HRR = 17), aseptic loosening (HRR = 17), haematoma formation (HRR = 5.3), superficial infection (HRR = 4.6) and dislocation (HRR = 1.8). More intra-operative complications, including intra-operative death, were reported for the cemented hemiarthroplasties. However, in a time-dependent analysis, the HRR for re-operation in both groups increased as follow-up increased. This study showed that the risk for revision was higher for uncemented than for cemented hemiarthroplasties