Introduction. Most of patients with unilateral hip disease shows muscle volume atrophy of pelvis and thigh in the affected side because of pain and disuse, resulting in reduced muscle weakness and limping. However, it is unclear how the muscle atrophy correlated with muscle strength in the patient with hip disorders. A previous study have demonstrated that the volume of the gluteus medius correlated with the muscle strength by volumetric measurement using 3 dimensional computed tomography (3D-CT) data, however, muscles influence each other during motions and there is no reports focusing on the relationship between some major muscles of pelvis and thigh including gluteus maximus, gluteus medius, iliopsoas and quadriceps and muscle strength in several hip and knee motions. Therefore, the purpose of the present study is to evaluate the relationship between muscle volumetric atrophy of major muscles of pelvis and thigh and muscle strength in flexion, extension and abduction of hip joints and extension of knee joint before surgery in patients with unilateral hip disease. Material and Methods. The subjects were 38 patients with unilateral hip osteoarthritis, who underwent hip joint surgery. They all underwent preoperative computed tomography (CT) for preoperative planning. There were 6 males and 32 females with average age 59.5 years old. Before surgery, isometric muscle strength in hip flexion, hip extension, hip abduction and knee extension were measured using a hand held dynamometer (µTas F-1, ANIMA Japan). Major muscles including gluteus maximus, gluteus medius, iliopsoas and quadriceps were automatically extracted from the preoperative CT using convolutional neural networks (CNN) and were corrected manually by the experienced surgeon. The muscle volumetric atrophy ratio was defined as the ratio of muscle volume of the affected side to that of the unaffected side. The muscle weakness ratio was defined as the ratio of muscle strength of the affected side to that of the unaffected side. The correlation coefficient between the muscle atrophy ratio and the muscle weakness ratio of each muscle were calculated. Results. The average muscle atrophy ratio was 84.5% (63.5%–108.2%) in gluteus maximus, 86.6% (65.5%–112.1%) in gluteus medius, 81.0% (22.1%–130.8%) in psoas major, and 91.0% (63.8%–127.0%) in quadriceps. The average muscle strength ratio was 71.5% (0%–137.5%) in hip flexion, 88.1% (18.8%–169.6%) in hip abduction, 78.6% (21.9%–130.1%) in hip extension and 84.3% (13.1%–122.8%) in knee extension. The correlation coefficient between the muscle atrophy and the ratio of each muscle strength between the affected and unaffected side were shown in Table 1. Conclusion. In conclusion, the muscle atrophy of gluteus medius muscle, psoas major muscle and quadriceps muscle significantly correlated with the muscle weakness in hip flexion. The muscle atrophy of psoas major muscle and quadriceps muscle also significantly correlated with the muscle weakness in knee extension. There were no significant correlation between the muscle atrophy and the muscle weakness in hip extension and abduction

Introduction. The purpose of this study was to demonstrate postoperative improvement and high satisfaction rates after a surgical approach that includes arthroscopic labral repair only, in patients with borderline dysplasia, without instability. Methods. Between September 2009 and December 2011, patients less than 50 years old who underwent hip arthroscopy for symptomatic intra-articular hip disorders, with a lateral center-edge (CE) angle between 20 and 25, were included in this study. Patients with Tönnis grade 2 or greater, hip joint space narrowing, severe hip dysplasia (CE〈20), hip joint instability and Legg-Calve-Perthes disease were excluded. Patient-reported outcome scores, including the modified Harris Hip Score (mHHS), Western Ontario and McMaster Universities Arthritis index (WOMAC), and visual analog scale (VAS) for pain were obtained in all patients preoperatively and at 1, 2, and 3 years postoperatively. Results. A total of 36 patients met the criteria to be included in the study. Of these, 32 (88.8%) patients were available for follow-up. There was a significant improvement in mHHS from 67.19±7.66 to 82.69±6.95 (P<0.001), and WOMAC score from 58.90±5.77 to 77.90±6.38 (P<0.001). There was a significant improvement in VAS scores from 5.8 to 2.9 (P<0.001). There was a significant improvement in range of motion, flexion from 108.44±7.77 to 115.31±6.08 (P<0.001) and external rotation from 29.06±5.74 to 33.13±4.88 (P<0.001). Conclusions. The current study demonstrates favorable results in borderline dysplasia hip without instability at minimum 3-year follow-up for an arthroscopic approach that includes labral repair. Labrum is the main key-stone structure, which should be preserved in borderline dysplasia hip for functional and pain improvement. Also the prognosis of treatment is probably forecasted more by the nature of stability and the intra-articular pathology rather than simply the presence or absence of radiographic finding of borderline dysplasia

Purpose. The purpose of this study was to demonstrate postoperative improvement and high satisfaction rates after a surgical approach that includes arthroscopic labral repair only, in patients with borderline dysplasia, without instability. Methods. Between September 2009 and December 2011, patients less than 50 years old who underwent hip arthroscopy for symptomatic intra-articular hip disorders, with a lateral center-edge (CE) angle between 20 and 25, were included in this study. Patients with Tönnis grade 2 or greater, hip joint space narrowing, severe hip dysplasia, hip joint instability and Legg-Calve-Perthes disease were excluded. Patient-reported outcome scores, including the modified Harris Hip Score (mHHS), Western Ontario and McMaster Universities Arthritis index (WOMAC), and visual analog scale (VAS) for pain were obtained in all patients preoperatively and at 1, 2, and 3 years postoperatively. Results. A total of 36 patients met the criteria to be included in the study. Of these, 32 (88.8%) patients were available for follow-up. There was a significant improvement in mHHS from 67.19 ± 7.66 to 82.69 ± 6.95 (P<0.05), WOMAC score from 58.90 ± 5.77 to 77.90 ± 6.38 (P<0.05), and VAS scores from 5.8 ± 0.88 to 2.9 ± 0.62 (P<0.05). There was a also improvement in range of motion, flexion from 108.44 ± 7.77 to 115.31 ± 6.08 (P<0.05) and external rotation from 29.06 ± 5.74 to 33.13 ± 4.88 (P<0.05). Conclusions. The current study demonstrates favorable results in borderline dysplasia hip without instability at minimum 3-year follow-up for an arthroscopic approach that includes labral repair. Labrum is the main key-stone structure, which should be preserved in borderline dysplasia hip for functional and pain improvement

Introduction. Torsional deformities are increasingly recognized as an additional factor in young patients with hip pain resulting from pincer- and cam-deformities. For example decreased femoral torsion can worsen an anterior Femoroacetabular impingement (FAI) conflict while an increased torsion can be beneficial with the same configuration. It is unknown how often torsional deformities are present in young patients presenting with hip pain that are eligible for joint preserving surgery. We questioned (1) what is the prevalence of a pathological femoral torsion in hips with FAI or hip dysplasia? (2) which hip disorders are associated with an abnormal torsion?. Methods. An IRB-approved retrospective study of 463 consecutive symptomatic FAI patients (538 hips) and a MRI or CT scan on which femoral torsion could be measured was performed (‘study group'). Out of 915 MRI we excluded 377 hips. The study group was divided into 11 groups: Dysplasia (< 22° LCE), retroversion, anteverted hips, overcoverage (LCE angle 36–39°), severe overcoverage (LCE>39°), cam (>50° alpha angle), mixed FAI, varus- (<125° CCD angle), valgus- (>139° CCD), Perthes-hips and hips with no obvious pathology. The ‘control group' of normal hips consisted of 35 patients (35 hips) without radiographic signs of osteoarthritis or hip pain wich was used for a previous study. Femoral antetorsion was measured according to Tönnis et al. as the angle between the axis of the femoral neck and the posterior axis of the femoral condyles. Normal femoral torsion was defined by Tönnis et al. as angles 10–25° while decreased resp. increased torsion was defined as <5° and >25°. Statistical analysis was performed using analysis of variances (ANOVA). Results. (1) Fifty-one percent of the patients of the study group presented with abnormal values for femoral torsion. Torsional deformities (<10° or >25°) were measured in 52% of all 538 hips eligible for joint preserving surgery. (2) Torsional deformities were present in 86% of Perthes hips, in 61 % of dysplastic hips, 52.3 % of hips with overcoverage, in 51% of mixed FAI, in 50% of varus hips, in 45% of valgus hips, in 45% of retroverted hips, in 47% of anteverted hips, in 43% of cam FAI, 35% of hips with severe overcoverage. No torsional deformity was present in the control group. Analysis of Variances (ANOVA) revealed significant differences (p<0.001) of torsion between normal hips (mean 17°) and hips with dysplasia (26°), valgus hips (27°), hips with no obvious pathology (30°) and Perthes hips (32°). Mean femoral torsion was in the normal range in the other groups. Conclusion. More than half of the patients wich are eligible for joint preserving surgery of the hip present with abnormal femoral torsion. In particular dysplastic-, valgus-, Perthes hips and hips with no obvious pathology had a significantly altered femoral torsion compared to normal hips. Femoral antetorsion should be measured in every patient eligible for hip-preserving surgery

Introduction. In the evaluation of patients with pre-arthritic hip disorders, making the correct diagnosis and identifying the underlying bone pathology is of upmost importance to achieve optimal patient outcomes. 3-dimensional imaging adds information for proper preoperative planning. CT scans have become the gold standard for this, but with the associated risk of radiation exposure to this generally younger patient cohort. Purpose. To determine if 3D-MR reconstructions of the hip can be used to accurately demonstrate femoral and acetabular morphology in the setting of femoroacetabular impingement (FAI) and development dysplasia of the hip (DDH) that is comparable to CT imaging. Materials and Methods. We performed a retrospective review of 14 consecutive patients with a diagnosis of FAI or DDH that underwent both CT and MRI scans of the same hip with 3D reconstructions. 2 fellowship trained musculoskeletal radiologists reviewed all scans, and a fellowship trained hip preservation surgeon separately reviewed scans for relevant surgical parameters. All were blinded to the patients' clinical history. The 3D reconstructions were evaluated by radiologists for the presence of a CAM lesion and acetabular retroversion, while the hip preservation surgeon also evaluated CAM extent using a clock face convention of a right hip, location of femoral head blood supply, and morphological anterior inferior iliac spine (AIIS) variant. The findings on the 3D CT reconstructions were considered the reference standard. Results. Of 14 patients, there were 9 females and 5 males with a mean age 32 (range 15–42). There was no difference in the ability of MRI to detect the presence of a CAM lesion (100% agreement between 3D-MR and 3D-CT, p=1), AIIS morphology (p=1, mode=type 1 variant), or acetabular retroversion (85.7%, p=0.5). 3D-MR had a sensitivity and specificity of 100 in detecting a CAM lesion relative to 3D-CT. Four CT studies were inadequate to adequately evaluate for presence of a CAM. Five CT studies were inadequate to evaluate for location of the femoral head vessels, while MRI was able to determine location in those patients. In the 10 remaining patients for presence of CAM, and nine patients for femoral head vessel location, there was no statistically significant difference between 3D-MR and 3D-CT in determining the location of CAM lesion on a clock face (p=0.8, mean MRI = 12:54, mean CT: 12:51, SD = 66 mins MR, 81 mins CT) or in determining vessel location (p=0.4, MR mean 11:23, CT mean 11:36, SD 33 mins for both). Conclusion. 3D MRI reconstructions are as accurate as 3D CT reconstructions in evaluating osseous morphology of the hip, and may be superior to CT in determining other certain clinically relevant hip parameters. 3D-MR was equally useful in determining the presence and extent of a CAM lesion, acetabular retroversion, and AIIS morphologic variant, and more useful than 3D CT in determining location of the femoral head vessels. In evaluating FAI or hip dysplasia, a 3D-MR study is sufficient to evaluate both soft tissue and osseous anatomy, sparing the need for a 3D CT scan and its associated radiation exposure and cost

Purpose. Posterior pelvis tilt (PPT) would affect lumbar lordosis and lead to hip flexion, which causes difficulties walking and standing in patients with hip disorders. Hip flexion movement associated with PPT is well known. We investigated the effect of the angle of hip flexion without the movement of PPT in the supine position. Methods. The study enrolled 24 healthy males with an average age of 20.5 ± 2.3 years. Two pelvic positions in the supine position were investigated: (1) the limited position of the PPT by 500ml PET bottle with water placed under their low back, and (2) the position without placing a PET bottle. We assessed unilateral hip flexion angle with photos taken with a digital camera. For reference, we took an X-ray of a healthy female and observed the lumbo-sacral from the sagittal plane in the supine position. Analysis. Data was processed by Image analysis software (Image J 1.42, NIH). Paired t-tests were used to assess the range of motion of individual joints in each position in the sagittal plane. MEPHAS software (Oosaka University. Japan) was used for all statistical processing, and the level of significance was set at P < 0.05. In addition, we also measured the lumbo-sacral angle (LSA), the lumbo-lordotic angle (LLA) and the sacral slope angle (SSA) with the X-ray. Results. The angle of hip flexion decreased 22.9±6.04 degrees on average in the limited position with a PET bottle compared with the position without a bottle (P<0.01). The angle of pelvis decreased 4.8±2.0 degrees on average. Discussion. The angle of hip flexion significantly decreased in the limited position with a PET bottle. Our results suggest the association movement of the PPT with hip flexion movement in the supine position. This suggests that movements of the LLA and SSA are involved greatly in hip flexion. Significance of study. Our results provide evidence that could lead to more effective way of measurement of the primary hip joint (coxal femoral joint) flexion in the supine position for the patients with hip diseases. If we can measure primary hip joint (coxal femoral joint) flexion, it may also be measured mobility of the pelvis. Measurement of the hip joint flexion should consider the movement of the lumbar vertebrae and the sacral slope

Introduction. Patients presenting with osteoarthritis as late sequelae following pediatric hip trauma have few options aside from standard Total Hip Replacement (THR). For younger more active patients, Hip Resurfacing Arthroplasty (HRA) can be offered as an alternative. HRA has been performed in the United States over the past decade and allows increased bone preservation, decreased hip dislocation rates versus THR, and potential to return to full activities. Patients presenting with end-stage hip arthritis as following prior pediatric trauma or disease often have altered hip morphology making HRA more complicated. Often Legg-Calve-Perthes (LCP) patients present with short, wide femoral necks, and femoral head distortion including coxa magna or coxa plana. There often can be acetabular dysplasia in conjunction with the proximal femoral abnormalities. Slipped Capital Femoral Epiphysis (SCFE) patients have an alteration of the femoral neck and head alignment, which can make reshaping the femoral head difficult. In particular, the femoral head is rotated medially and posteriorly, reducing the anterior and lateral offset. We present a cohort of 20 patients, with history of a childhood hip disorder (SCFE or LCP), who underwent HRA to treat end-stage arthritis. Fifty percent had prior pediatric surgical intervention at an average age of 11. Method. After Institutional Review Board approval, data was reviewed retrospectively on patients with pediatric hip diseases of SCFE and LCP who underwent HRA using the Birmingham Hip Resurfacing (BHR) by a single orthopaedic surgeon at a teaching institution. Harris Hip Scores (HHS), plain radiographs and blood metal ion levels were reviewed at routine intervals (12 months and annually thereafter). Those who had not returned for recent follow-up were contacted via telephone survey for a modified HHS. Results. Twenty patients had mean follow up of 2.8 years (range 1–7 years). Twelve had LCP and 8 SCFE. Median implant duration was 2.4 years. One-year metal ion testing revealed median chromium level of 2.3 ppb and median Cobalt level of 1.5 ppb. At one-year follow up, plain radiographs demonstrated all patient implants to be well-fixed, without radiolucent lines or osteolysis. Two patients at three and five-year follow-up exhibited heterotopic ossification. Mean HHS for LCP at 6 weeks post-operative was 88, and 98 at one year. Mean HHS for SCFE at 6 weeks post-operative was 77.5, and 98.6 at one year. LLD was significantly improved with an average pre-operative LLD of 12.6 mm and post op of 2.6 mm (p-value <0.001). At most recent follow-up, all retained their implants with overall average HHS of 98. Conclusion. At minimum of one-year following HRA, an increase in functional outcomes is found in patients who underwent HRA for osteoarthritis associated with LCP and SCFE with a mean HHS of 98. No increase was found in complications including femoral neck fracture or implant loosening despite technical challenges of the procedure related to proximal femoral morphologic abnormalities, or presence of acetabular dysplasia [Fig 1]

Hip dysplasia represents a wide spectrum of disease, and interest in the treatment of the disorder has increased with the development of newer surgical techniques and a greater understanding of young adult hip disorders. National hospital episode statistics (HES) were studied from 1999 to 2010. This data remains the current best source of information on surgical procedures outside of dedicated registries. Age stratified data was analysed for 7 separately coded operations for the treatment of hip dysplasia. Overall in the paediatric population there were 898 procedures in 2010 compared to 793 procedures in 2000, but with no detectable trend across that period. Equally, there were no great fluctuations in the small numbers of arthroplasty procedures recorded in either the paediatric or adult populations. There was, however, a clear increase in surgery being performed in adult patients. 210 primary pelvic osteotomies were performed in 2010, compared with only 77 in 2000, with a noticeable increase from 2005 onwards. A similar trend in other extra-articular procedures is seen, rising from 2 to 55 per year over the period studied. Overall, the level of surgical intervention has steadily risen from 104 procedures in 2000 to 422 in 2010, representing a fourfold rise in the number of operations being performed for hip dysplasia in the adult population over an 11 year period. The reasons for this are unclear. It may reflect improvements in the ability to diagnose and intervene earlier to prevent disease progression, but further research is also needed to better define the aetiology underlying these cases that present to the hip surgeon later in life

INTRODUCTION. Symptomatic hip disorders associated with cam deformities are routinely treated with surgery, during which the deformity is resected in an effort to restore joint range of motion, reduce pain, and protect the joint from further degeneration. This is a technically demanding procedure and the amount of correction is potentially critical to the success of the procedure: under-resection could lead to continued progression of the OA disease process in the joint, while over-resection puts the joint at risk for fracture. This study compares the accuracy of a new robotically assisted technique to a standard open technique. METHODS. Sixteen identical Sawbones models with a cam type impingement deformity were resected by a single surgeon simulating an open procedure. An ideal final resected shape was the surgical goal in all cases. 8 procedures were performed manually using a free-hand technique and 8 were performed using robotic assistance that created a 3-dimensional haptic volume defined by the desired post-operative morphology. All of 16 sawbones, including uncut one as well, were scanned by Roland LPX-600 Laser scanner with 1mm plane scanning pitch and 0.9 degree of rotary scanning. Post-resection measurements included arc of resection, volume of bone removed and resection depth and were compared to the pre-operative plan. RESULTS. The desired arc of resection was 117.7° starting at −1.8° and ending at 115.9°. Manual resection resulted in an average arc of resection error of 42.0 ± 8.5° with an average start error of −18.1 ± 5.6° and end error of 23.9 ± 9.9° compared to a robotic arc of resection error of 1.2 ± 0.7° (p<0.0001), an average start error of −1.1 ± 0.9° (p<0.0001) and end error of −0.1 ± 1.0° (p<0.0001). Over-resection occurred with every manual resection with an average volume error of 758.3 ± 477.1mm. 3. compared to an average robotic resection volume error of 31.3 ± 220.7mm. 3. (4 over- and 4 under-resected; p<0.01). CONCLUSION. Even using an approach that maximizes visualization, robotic assistance proved to be significantly more accurate and less variable than manual techniques. This is critical as the success of the surgical treatment of FAI depends on accurate and precise boney resection. The benefits of this new technique may prove even more valuable with less invasive, arthroscopic treatments that can be even more technically demanding

Introduction. Optimal orientation of the acetabular cup is vital issue not only for primary but revision total hip arthroplasty (THA). Especially in revision THA, malorientation of the cup is likely to occur because anatomical landmark around acetabular rim often disappeared by the osteolytic bony destruction or the process of cup removal. As a consequence, higher dislocation rate and accelerated wear of bearing surface compared with primary THA, which affect the outcome of revision THA, are concerned. On the other hand, computer aided navigation system has been developed in recent years because of substantial errors of manual technique in cup placement even with experienced surgeon. The purpose of this study was to evaluate the accuracy of the cup orientation in revision cementless THA using CT based navigation system. Materials and Methods. Thirteen patients who underwent revision cementless THA with CT based navigation system (Stryker Japan) were employed for this study. The average age at surgery was 64 years (range, 45–78 years, 3 men and 11 women). Primary surgery was cementless THA in 4 and BHA in 9 hips. Disorder which led to revision THA was loosening of the cup, massive retroacetabular osteolysis, and severe proximal migration of bipolar outer head. In most cases, acetabular rim was not conserved. After removal of the cup or outer head, we revised acetabular components with cementless hemispherical TriAD cups (Stryker Japan) using direct lateral approach in lateral decubitus position. For all the patients, post-operative CT scans were performed and the cup inclination and anteversion angle were measured using 3D image-processing software (Stryker, Japan). The difference between the intra-operative target angle and the angle measured from the post-operative CT image were calculated. Results. The average cup orientation measured by postoperative CT was 39.6±3.8° (range, 34–46°) in inclination and 20.5±5.0° (range, 17–29°) in anteversion. The accuracy (calculated as a mean of the absolute difference between intra-operative target angle and post-operative CT angle) of inclination and anteversion angle were 2.0 ± 1.8° (range, 0–5°) and 2.3±2.2° (range, 0–5°), respectively. The accuracy was within 5° in all cases and there was no postoperative dislocation. Discussion. Our study showed that CT based navigation system provided accurate orientation of the acetabular component even in revision cementless THA as well as in primary THA. Although the basic process of the navigation system in revision THA is same as primary THA, several pitfalls exist. Metal artifact from preexisting hardware such as screws, cup, and head-neck of the stem makes it difficult to do preoperative planning, intraoperative point matching, and surface registration. We have to pay maximum attention to avoid including metal artifact especially around acetabular rim when editing surface of the pelvis at preoperative planning, and also avoid pointing the area around acetabular rim when doing surface registration intraoperatively

Developmental dysplasia of the hip (DDH) represents a heterogeneous group of deformities that are commonly associated with secondary osteoarthritis. Affected hips may require total hip arthroplasty (THA) for endstage disease and these cases can present unique challenges for the reconstructive surgeon. While the severity of deformity varies greatly, optimizing THA can be challenging even in the “mildly” dysplastic hip. These disorders are commonly characterised by acetabular deficiency with inadequate coverage of the anterolateral femoral head and proximal femoral abnormalities including excessive femoral antetorsion, coxa valga and femoral stenosis. In more severe cases, major femoral head subluxation or dislocation can add additional complexity to the procedure. In addition to the primary deformities of DDH, secondary deformities from previous acetabular or proximal femoral osteotomies may also impact the primary THA. Primary THA in the DDH hip can be optimised by detailed understanding of the bony anatomy, careful pre-operative planning, and an appropriate spectrum of techniques and implants for the given case. This presentation will review the abnormal hip morphologies encountered in the dysplastic hip and will focus on the more challenging aspects of THA. These include acetabular reconstruction of the severely deficient socket and in the setting of total dislocation, femoral implant procedures combined with corrective osteotomy or shortening, and issues related to arthroplasty in the setting of previous pelvic osteotomy. Despite the complexity of reconstruction for various dysplastic variants the clinical outcomes and survivorship of these procedures are good to excellent for most patients. Nevertheless, more complex procedures are associated with an increased complication rate and this should be considered in the surgical decision-making process

Aims

The aetiologies of common degenerative spine, hip, and knee pathologies are still not completely understood. Mechanical theories have suggested that those diseases are related to sagittal pelvic morphology and spinopelvic-femoral dynamics. The link between the most widely used parameter for sagittal pelvic morphology, pelvic incidence (PI), and the onset of degenerative lumbar, hip, and knee pathologies has not been studied in a large-scale setting.