Introduction. Titanium nitride (TiN) coatings are used in total hip arthroplasty to reduce friction of bearing couples or to decrease the allergic potential of orthopaedic alloys. Little is known about performance of currently manufactured implants, since only few retrieval studies were performed, furthermore they included a small number of implants manufactured over 15 years ago. Aim of study. To examine wear and degradation of retrieved TiN coated femoral heads articulating with ultra-high molecular weight polyethylene (UHMWPE). Methods. We included eight femoral heads with a made od TiAl6V4 alloy and coated with TiN using Physical Vapour Deposition (PVD). All heads (28 and 32 mm) were retrieved after at least 12 months of use (range 12–56). The reason for revision was aseptic loosening in 6 cases, septic loosening in one case and recurrent dislocations (five episodes) in one uncemented prosthesis. One unused head was included as reference sample. All implants were evaluated with light microscopy, Scanning Electron Microscopy (SEM) with Energy-Dispersive X-ray Spectroscopy (EDS). 30 SEM images from each implant were digitally analysed using ImageJ software to compare damage in loaded and non weight-bearing parts of the heads. Results. Studies with light microscopy revealed severe damage to the dislocated femoral head, with multiple metallic scratches. SEM studies indicated presence of multiple scratches and pinholes with a diameter of 1–10 µm (Fig1a,b,). Residue from the manufacturing process was present in all implants in form of pure Ti droplets found in round voids. In all implants we found irregular areas (diam. 20–50 µm, Fig 1c,d) where the coating was delaminated from the substrate metal with cracks arising from coating defects (Fig1e-h). Some of these debonded fragments were embedded into the PVD layer in weight-bearing parts of all heads. In one head, which was subjected to dislocations we observed deposits of titanium alloy from the acetabular shell (Fig 2a,b). The deposits were accompanied by large patches of delaminated coating as well as multiple cracks (Fig 2c,d). Small fragments of the acetabular titanium alloy damaged the coating in third body mechanism. Surprisingly in three implants we EDS analysis revealed similar spheres (diam. 1–10 µm) containing Niobium (Nb), although this element is not a part of any of the components used in the implants(Fig 2e,f). Interestingly presence of Nb droplets were associated with a higher number of other defect in these heads both in weight-baring and non weight-bearing parts of the heads suggesting inferior coating quality in these cases (Fig 2 g,h; Fig3, cases H2,H5,H8). Conclusions. Compared to previous studies we did not observe severe wear or the coating, however we observed some degradation of the film in vivo. Our results indicate that dislocation can lead to severe failure of the coating in vivo. Moreover presence of Nb residues and coexisting defects in some implants suggests inferior coating quality in these implants and indicates the need for strict monitoring of the production process. This study was funded by a grant from the National Science Centre nr 2012/05/D/NZ5/01840

Introduction. Cemented hemiarthroplasty for neck of femur fractures has been advocated over uncemented hemiarthroplasty due to better post-operative recovery and patient satisfaction. However, studies have shown adverse effects of bone cement on the cardio-respiratory system which may lead to higher morbidity and mortality. Therefore, in some institutes, the use of an uncemented prosthesis has been adopted for patients with a high number of co-morbidities. The aim was to compare early mortality rates for cemented vs. uncemented hemiarthroplasties. Method. Cohort study of displaced intracapsular hip fractures treated with hemiarthroplasty between 1999–2009 at one institute. A total of 3094 hemiarthroplasties performed; out of which 1002(32.4%) were cemented and 2092(67.6%) were uncemented. 48hour and 30day mortality rates for the two groups were compared and a multivariate Cox regression model used to eliminate confounding factors. Significant confounding factor included age, sex, mini mental test score, medical co-morbidities, Nottingham Hip Fracture Score and delay to surgery. Results. The study showed that, after eliminating confounding factors, 48hour mortality in the cemented group was 0.3% compared to 0.5% in the uncemented group (p=0.388). However, the adjusted 30day mortality rate for the cemented group (4%) was shown to be significantly lower than for the uncemented group (10.8%) (p< 0.001). Conclusion. The use of cement in hip hemiarthroplasty is not associated with an increased rate of mortality at 48hours or at 30days. Along with emerging evidence of better post-op recovery and patient satisfaction with the use of a cemented prosthesis, we support the use of cement for all patients undergoing hip hemiarthroplasty

Displaced fractures of the neck of femur are routinely treated in the elderly by either cemented hemiarthoplasty, in the fit, or uncemented hemiarthroplasty, in the less fit. In Scotland the Scottish Intercollegiate Guidelines Network (SIGN) guidelines are followed to identify which patients should have a cemented prosthesis. This is based on cardiovascular status, and the age and fragility of the patient. An uncemented prosthesis should be a final operation. A peri-prosthetic fracture is considered a failure of treatment as the patient then has to undergo an operation with a far greater surgical insult. We looked at all neck of femur fractures over a period of Jan 2007 to June 2010. The number of the peri-prosthetic fractures for uncemented hip hemiarthroplasties was established and a case note review was carried out. There was 1397 neck of femur fractures. 546 hemiarthroplasties were carried out, of which 183 were cemented, and 363 uncemented. 14 patients (4% of uncemented hemiarthoplasties) had peri-prosthetic fractures. The case notes of these patients were analysed. We found there was a common link of significant cardiovascular risk, lack of falls assessment (only 14% of patients had a completed falls assessment and 35% sustained their fracture during an admission to hospital) and confusion (43% had a degree of dementia that caused significant confusion). Cemented implants should be considered in those who have failed falls assessment, or are confused; even if the cardiovascular risk is significant. This decision should be made in conjunction with a senior anaesthetist. This is being implemented in our unit and a prospective audit is being carried out over the same time period (July 2010 to Dec 2013) to assess the benefit

Purpose of study:. The purpose of the study is to evaluate the changes in peri-prosthetic bone mineral density following cemented and cementless total hip arthroplasty over a follow up period of 1 year. Description of methods:. Ethics approval was sought and granted by the South African Medical Association Research Ethics Committee (SAMAREC). Patient consent for participation was obtained. Recruitment of the cohort took place over 2 years. Patients received an uncemented (Synergy) or cemented (Spectron) prosthesis as clinically appropriate. Functional status according to the University of California Los Angeles activity scale (UCLA scale) and bone mineral density as measured by Dual Energy X-ray Absorptiometry (DEXA) was assessed pre-operatively and at 3 months, 6 months and 12 months post-operatively. An independent Contract Research Organisation was used to monitor the site. Summary of results:. As at August 2010, 59 unique patients had undergone 59 hip replacements, and 7 patients (8.5%) were still due their 12 month evaluation. The mean UCLA scored showed a marked and steady improvement post-operatively, with most of the gain demonstrated by 3 months. When evaluating all patients, the mean pre-operative values for Gruen Zones 2, 4, and Net were significantly lower than the mean 12 month values. When evaluating patients who received the uncemented prosthesis (n=40), the mean pre-operative values for Gruen Zones 2 and Net were significantly lower than the mean 12 month values, and the mean pre-operative values for Gruen Zones 1 and 3 were significantly higher than the mean 12 month values. When evaluating patients who received the cemented prosthesis (n=19), the median pre-operative values for Gruen Zones 1, 2, 3, 4, 7 and Net were significantly lower than the median 12 month values. Conclusion:. At 1 year post surgery overall bone density showed a significant increase in both the cemented and uncemented cohort

Introduction. Total hip arthroplasty (THA) is undertaken to relieve pain and to restore mobility. The orthopaedic community remains divided on the influence of surgical approach in achieving functional recovery most quickly and effectively. We report a study comparing THA performed through a posterior (Posterior) against anterior approach (Heuter). Methods. Fifty patients were prospectively enrolled and randomized for Posterior or Heuter procedures. Informed patient consent and local ethics approval was obtained. All patients received an uncemented, ceramic-on-ceramic prosthesis performed by a single surgeon. Functional outcome was assessed by time to achieve milestones of walking, stair climbing, hip movement and balance. Kinematic data on level-ground walking and the effect of fatigue was assessed using a portable gait analysis system at 6-, 12-, and 24-weeks post-operatively. Results. The Heuter group showed significantly quicker balance control, on average 10 days earlier, than the posterior group (p< 0.05). The achievement of the other milestones of independent and distance walking, stair climbing and hip movement also showed quicker recovery overall in the Heuter group; this was, however, not statistically significant (p>0.05). Kinematic data suggested that there were no statistical differences in stance phase stability (p=0.73) or pulling acceleration (p=0.77) between the 2 groups at each time point. Fatigue, effected via timed, gentle mobilisation on a treadmill, also did not significantly result in a difference. Discussion. The Heuter approach is rarely used in the UK, although its recent resurgence can be attributed to its perceived theoretical benefit of sparing muscle; this contrasts with the detachment of muscle required for the Posterior approach. Our experience show that the Heuter approach does not compromise the quality of gait, and it offers advantages in the rate of functional recovery, especially that of balance control

Thrust plate prosthesis (TPP) is a bone conserving prosthesis in use for over thirty years. TPP is a stemless and uncemented femoral prosthesis fixed at the lateral femoral cortex with a bolt, plate and screw. This has a metal-on-metal articulation with a 28mm Metasul head and Allofit press fit acetabular cup. Our study aimed to assess the survival of this prosthesis. At Oswestry 234 TTP's were implanted between 1995 and 2005. All patients completed a self-assessed questionnaire of Harris Hip Score pre-operatively and post-operatively at 2 months, 1 year, and then yearly. Only those who had a follow up was within the last two years were included in the analysis. 76 patients who had failed to satisfy the criteria were excluded. Of the 158 hips in the study 75 hips were in male patients and 83 were in female patients. The median age of patients was 52 years (range 15 to 82). 75 hips were on the right side and 83 on the left. All patients were operated by the senior author or a senior trainee under his supervision (seven hips). Revision of the implant or decision to revise was taken as the end point of our study. The median time to follow up was 7 years (range 1 to 15). The median pre-operative hip score was 43 (range 3 to 77) which rose to 83 points (range 11 to 100) at the latest follow up. Median hip score in females improved from 39 to 82 points and in males from 52 to 85 points. Twelve patients (5.1%) underwent revision surgery either for infection or aseptic loosening. The Thrust Plate Prosthesis had a good outcome with an increase in hip score of 40 points and 94.9 % survival at a median of 7 years

Despite the generally inferior clinical performance of acetabular prostheses as compared to the femoral implants, the causes of acetabular component loosening and the extent to which mechanical factors play a role in the failure mechanism are not clearly understood yet. The study was aimed at investigating the load transfer and bone remodelling around the uncemented acetabular prosthesis. The 3-D FE model of a natural right hemi-pelvis was developed using CT-scan data. The same bone was implanted with two uncemented hemispherical acetabular components, one metallic (CoCrMo alloy) and the other ceramic (Biolox delta), with 54 mm outer diameter and 48 mm bearing diameter. The FE models of the implanted pelvis (containing ∼116000 quadratic tetrahedrals) were generated using a submodelling approach, which were based on an overall full model of implanted pelvis (containing ∼217600 quadratic tetrahedrals) acted upon by hip joint force and twenty one muscle forces. The apparent density (ρ in g cm. −3. ) of each cancellous bone element was calculated using linear calibration of CT numbers of bone, from which the Young's modulus (E in MPa) was determined using the relationship, E = 2017.3 ρ. 2.46. [1]. Implant-bone interface conditions, fully bonded and debonded with friction coefficient μ = 0.5, were simulated using contact elements. Applied loading conditions consist of two load cases during a gait cycle, corresponding to 13% and 52% of the walking cycle. Fixed constraints were prescribed at the pubis and at the sacroiliac joint. The bone remodelling algorithm was based on strain energy based site-specific formulation [2]. The FE analysis, in combination with the bone remodelling simulation, was performed using ANSYS FE software. The predicted changes in peri-prosthetic bone density were similar for the metallic and the ceramic implant. For debonded implant-bone interface, stress shielding led to ∼20% reductions in bone density at supero-anterior, infero-anterior and posterior part of the acetabulum (Fig. 1). However, bone apposition was observed at the supero-posterior part of the acetabulum, where implantation led to ∼60% increase in bone density (Fig. 1). The effect of bone resorption was higher for the fully bonded implant-bone interface, wherein bone density reductions of 20–50% were observed in the cancellous bone underlying the implant (Fig. 1), which is indicative of implant loosening over time. However, implantation led to an increase in bone density around the acetabular rim for both the interface conditions (Fig. 1). These results are well corroborated by the earlier studies [3, 4]. Implantation with a ceramic component resulted in 2–7% increase in bone density at supero-posterior part of the acetabulum as compared to the metallic component, for the debonded interface condition. Considering better wear resistant properties and absence of metal ion release, results of this study suggest that the ceramic component might be a viable alternative to the metallic prosthesis

INTRODUCTION. Uncemented total hip replacement is on the rise worldwide. Latest studies from various European and other developed country joint registers are clearly showing that it is taking preference over the cemented joint replacements. These figures were discussed most recently at the London hip meeting. Our study is related to one single make of implant the Exceed hip (Biomet) at two hospitals in Northamptonshire, Kettering UK. MATERIAL & METHODS. Our series includes 256 cases of Exceed uncemented total hip replacement done in 236 patients with a minimum follow up of 6 months and maximum of 5 years. The study included 126 female and 110 male patients. Out of this number 121 cases were done at Kettering General Hospital and 135 cases were performed at Woodlands Hospital private limited in Kettering. The cases were performed by 2 senior consultants and one junior consultant. The total number of cases was 317 but 73 cases were lost to follow up and 2 patients had expired at the time of the study. In all cases pre operative and post operative Harris hip scores were measured. Patients were asked to fill up the scores in retrospect through post. The range of motion parameter and range of motion scale were measured and added from clinical notes. The average age of patients in our study was 71.2 years with the oldest patient being 90 years old and the youngest being 34 years old. Most common cause for replacement was primary osteoarthritis in 202 cases. In 52 cases it was done for secondary osteoarthritis due to rheumatoid arthritis or post traumatic osteoarthritis following dislocation and acetabular fractures. In 2 cases it was done for fracture neck of femur. All the cases were done through posterior approach. One senior surgeon used bone grafts in the acetabular floor harvested from the femoral head at time of surgery in all of his cases. The ABT ringloc shell, polyethylene liner was used in all cases. The average pre operative Harris hip score was 43.15 and average post operative Harris hip score was 78.32. In 4 cases peri prosthetic fractures occurred per operatively and needed fixation. In 3 cases dislocation occurred but only one case needed revision due to recurrent dislocation. DISCUSSION. Our early results are showing encouraging results with the Exceed uncemented total hip replacement prosthesis. The Harris hip score post operatively shows good improvement and satisfaction. In two cases there was unexplained pain along the thigh and groin. One of these cases was post dislocation. The dislocation rate was around 1.2% and periprosthetic fracture rate was 1.6%. Longer follow up is needed to evaluate and compare the results of this particular implant with the other studies on uncemented total hip replacement that have been published in literature