Advertisement for orthosearch.org.uk
Results 1 - 20 of 59
Results per page:
Orthopaedic Proceedings
Vol. 101-B, Issue SUPP_10 | Pages 15 - 15
1 Oct 2019
Saunders F Gregory J Pavlova A Muthuri S Hardy R Martin K Barr R Adams J Kuh D Aspden R Cooper R Ireland A
Full Access

Purpose and Background. Both overall spine shape and the size and shape of individual vertebrae undergo rapid growth and development during early childhood. Motor development milestones such as age of walking influence spine development, with delayed ambulation linked with spinal conditions including spondylolysis. However, it is unclear whether associations between motor development and spine morphology persist into older age. Therefore, these associations were examined using data from the MRC National Survey of Health and Development, a large nationally-representative British cohort, followed up since birth in 1946. Methods and Results. Statistical shape modelling was used to characterise spinal shape (L5-T10) and identify modes of variation in shape (SM) from dual energy x-ray absorptiometry images of the spine taken at age 60–64 years (N=1327 individuals; 51.8% female). Associations between walking age in months (reported by mothers at 2 years) and SMs were examined with adjustment for sex, birthweight, socioeconomic position, height, lean mass and fat mass. Later onset of independent walking was weakly associated with greater lordosis (SM1; P=0.05) and more uniform antero-posterior vertebral size along the spine (SM6, P=0.07). Later walking age was also associated with smaller relative anterior-posterior vertebral dimensions (SM3) among women whereas the opposite was found for men (P <0.01 for sex interaction). Conclusions. Spinal morphology in early old age was associated with the age that individuals began walking independently in childhood, potentially due to altered mechanical loading. This suggests that motor development may have a persisting effect on clinically-relevant features of spine morphology throughout life. Conflict of interest: None. Funded by the UK Medical Research Council (Grant MR/L010399/1) which supported FRS, SGM and AVP


Orthopaedic Proceedings
Vol. 96-B, Issue SUPP_15 | Pages 22 - 22
1 Oct 2014
Meakin J Hopkins S Clarke A
Full Access

The objective of this study was to assess the reliability and appropriateness of statistical shape modelling for capturing variation in thoracic vertebral anatomy for future use in assessing scoliotic vertebral morphology. Magnetic resonance (MR) images of the thoracic vertebrae were acquired from 20 healthy adults (12 female, 8 male) using a 1.5 T MR scanner (Intera, Philips). A T1 weighted spin-echo sequence (repetition time = 294 ms, echo time = 8 ms, number of signal averages = 3) was used. A set of slices (number = 27, thickness = 1.9 mm, gap = 1.63 mm, pixel size = 0.5 mm) were acquired for each vertebrae, parallel to the mid-transverse plane of the vertebral body. Repeated imaging, including participant repositioning, was performed for T4, T8 and T12 to assess reliability. Landmark points were placed on the images to define anatomical features consisting of the vertebral body and foramen, pedicles, transverse and spinous processes, inferior and superior facets. A statistical shape model was created using software tools developed in MATLAB (R2013a, The MathWorks Inc.). The model was used to determine the mean vertebral shape and ‘modes of variation’ describing patterns in vertebral shape. Analysis of variance was used to test for differences between vertebral levels and subjects and reliability was assessed by determining the within-subject standard deviation from the repeated measurements. The first three modes of variation, shown below (green = mean, red and blue = ±2 standard deviations about the mean), accounted for 70% of the variation in thoracic vertebral shape (Mode 1 = 44%, Mode 2 = 19%, Mode 3 = 4%). Visual inspection indicated that these modes described variation in anatomical features such as the aspect ratio of the vertebral bodies, width and orientation of the pedicles, and position and orientation of the processes and facet points. Variation in shape along the thoracic spine, characterised by these modes of variation, was consistent with that reported in the literature. Significant differences (p< 0.05) between vertebral levels and between some subjects were found. The reliability of the method was good with low relative error (Mode 1 = 5%, Mode 2 = 8%, Mode 3 = 19%). Statistical shape modelling provides a reliable method for characterizing many anatomical features of the thoracic vertebrae in a compact number of variables. This is useful for robustly assessing morphological differences between scoliotic and non-scoliotic vertebrae and in assessing entry points and trajectories for pedicle screws


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_2 | Pages 25 - 25
1 Feb 2015
Pavlova A Eseonu O Jeffrey J Barr R Cooper K Aspden R
Full Access

Purpose and Background. Low birth weight is related to decreased lumbar spine vertebral canal size and bone mineral content later in life, suggesting that antenatal factors affect spine development. The purpose of this study was to explore associations between antenatal factors and lumbar spine morphology in childhood. Methods. Antenatal data and supine MR images of the lumbar spine were available for 161 children. Shape modelling, using principle components analysis, was performed on mid-sagittal images to quantify different modes of variation in lumbar spine shape. Previously collected measures of spine canal dimensions were analysed. Results. Almost 75 % of all of the variation in lumbar spine shape was explained by just three modes. Modes 1 and 3 described the total amount and the distribution of curvature along the spine, respectively. Mode 2 (M2) captured variation in vertebral shape and size; increasing mode scores represented flatter vertebral bodies with increasing anterior-posterior dimensions. We saw no significant associations between mode scores and birth weight z-scores, placental weight, gestation length and no effect of maternal smoking (P>0.05). Controlling for gestation length revealed a positive correlation between birth weight and M2 (P=0.02). Males, longer babies and those from heavier mothers had higher M2 scores (P<0.05). This sex difference remained even when controlling for the other factors (P<0.001). Modes 1 and 2 correlated with spine canal dimensions (P<0.05). Conclusions. Our results suggest that antenatal factors have some effect on vertebral body morphology but not overall lumbar spinal shape. Perhaps environmental factors during growth and genetics play a larger role in determining the overall spine shape. This abstract has not been previously published in whole or substantial part nor has it been presented previously at a national meeting. Conflicts of interest: No conflicts of interest. Sources of funding: This work was supported by a studentship granted to the University and awarded to AVP


Orthopaedic Proceedings
Vol. 96-B, Issue SUPP_4 | Pages 17 - 17
1 Feb 2014
Pavlova AV Meakin JR Cooper K Barr RJ Aspden RM
Full Access

Background and Aim. Low back pain is highly prevalent, particularly in manual occupations. We previously showed that the lumbar spine has an intrinsic shape, identifiable in lying, sitting and standing postures, that affects the spine's response to load. Its effects on motion are unknown. Here we investigate whether intrinsic spinal shape is detectable throughout a greater range of postures and its effect on how healthy adults lift a weighted box. Methods. The lumbar spine was imaged using a positional MRI with participants (n=30) in 6 postures ranging from extension to full flexion. Active shape modelling was used to identify and quantify ‘modes’ of variation in lumbar spine shape. 3D motion capture analysed participants' motion while lifting a box (6–15 kg, self-selected). Results. Two modes accounted for 89.5% of variation in spinal shape, describing the overall curvature (mode 1) and distribution of curvature (mode 2). Within the first 9 modes, scores were significantly correlated between all six postures (r = 0.4−0.97, P<0.05), showing that intrinsic shape was partially maintained throughout. Individuals with straighter spines lifted with greater knee flexion (r = 0.4, P = 0.03) typical of squatting. Knee flexion negatively correlated with lumbar (r = −0.5 to −0.86, P<0.01) and pelvic flexion (r = −0.81, P<0.001). Those with curvier spines flexed significantly more at the back (r = −0.79, P=0.02) typical of stooping. Conclusion. In summary, individuals with straight spines squatted to lift while those with curvy spines stooped, indicating that the way we move to pick up a load is associated with the shape of our spine


Orthopaedic Proceedings
Vol. 100-B, Issue SUPP_2 | Pages 20 - 20
1 Feb 2018
Pavlova A Muthuri S Saunders F Hardy R Gregory J Barr R Martin K Adams J Kuh D Cooper R Aspden R
Full Access

Purpose. To investigate associations between sagittal thoracolumbar spine shape with sex and measures of adiposity throughout adulthood. Methods. Thoracolumbar spine shape was characterised using statistical shape modelling on lateral dual-energy x-ray absorptiometry images, recorded for vertebral fracture analysis, of the spine from 1529 participants of the MRC National Survey of Health and Development, acquired at age 60–64 years. Associations between spine shape modes (SM) and 1) sex, 2) contemporaneous measures of overall and central adiposity (indicated by body mass index and waist circumference, respectively), 3) changes in total and central adiposity during earlier stages of adulthood and age at onset of overweight, were investigated. Results. Four of the first eight spine modes (SM) describing lumbar spine shape differed by sex; on average, women had more lordotic spines than men with relatively smaller but caudally increasing anterior-posterior (a-p) vertebral diameters. Greater BMI and waist circumference and earlier onset of overweight were associated with uneven (or snaking) spinal curvatures (SM2) and larger a-p vertebral diameters (SM3). Central adiposity was also associated with larger caudal disc heights (SM4) in women, especially increases between 36–43 years. Conclusions. Sagittal spine shapes differed by sex and associations with overall and central adiposity also differed. Overweight and greater central adiposity earlier in adulthood were particularly important, and were associated with a straighter but more unevenly curved spine with larger vertebrae and caudal discs heights, possibly explained by a chronic effect of increased mechanical loading on the spine. Conflicts of interest: None. Funding received from MRC


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_X | Pages 24 - 24
1 Apr 2012
Sell P Quereshi A Sell B
Full Access

There remains debate regarding which surgical approach gives the best outcome, anterior alone or posterior alone, in surgically relevant adolescent idiopathic scoliosis. The operation is mainly cosmetic in terms of health care advantage. This prospective study evaluated scar site preference and other relevant body image parameters prior to any intervention.

Patients and their parents had a structured interview involving SRS20 and Walter Reed Visual Assessment Scale as well as grading of nine AP and lateral clinical photographs specifically of anterior and posterior scoliosis surgery scars. Each clinical image was graded 1-10 on a scale of unsatisfactory and satisfactory. Parents completed assessments as well as the patients.

Results: 28 patients, 6 males, 22 females, 8 females were pre-menarche, mean age 14 (12-17), mean cobb angle 57, completed the study. Mean parental age 45.

There was no significant difference between mean scores for the four anterior scar (6.36) and the five posterior scar (6.35) images. p value 0.49. In parents the preferences were more apparent posterior 6.9, anterior 6.2 but this was not statistically significant (p=0.06)

There was no significant difference between all four domains of the SRS between parent and child. In terms of expressed preference the child had no preference in 7, thoracotomy in 7 and posterior midline in 14, whereas parents expressed no preference in 12, thoracotomy in 4 and posterior midline in 12.

In this prospective study there was no perceived difference in acceptability of anterior or posterior scars for scoliosis surgery approaches.


Objective:

The aim of this study was to define a method to identify the location of the great vessel bifurcation (GVB) in relation to the L5/S1 disc and measure the lumbo-sacral angle (LSA) at L5/S1 using routine lumbar spine MRI images on standard PACS software. The information can be used for surgical planning of anterior lumbar interbody fusion (ALIF) at L5/S1 with a plate and cage.

Method:

Axial and sagittal T2 sections of 192 lumbar spine MRI scans were viewed simultaneously to classify the position of the GVB and the LSA. A further 75 scans were assessed independently by 2 examiners (E1/E2) utilizing the same classification to record the GVB position (High (H), Middle (M), Low (L)) and size of the LSA using standard radiology software. Twenty five images were randomly selected for repeat measurements one month later.


Orthopaedic Proceedings
Vol. 106-B, Issue SUPP_15 | Pages 22 - 22
7 Aug 2024
Saunders F Parkinson J Aspden R Cootes T Gregory J
Full Access

Background. Lateral lumbar spine statistical shape models (SSM) have been used previously to describe associations with osteoarthritis and back pain. However, associations with factors such as osteoporosis, menopause and parity have not been explored. Methods and Results. A 143-point SSM, describing L1 to the top of L5, was applied to lateral spine iDXA scans from UK Biobank. Associations with self-reported osteoporosis, menopause, parity and back pain and the first 10 modes of variation were examined using adjusted binary logistic regression or linear regression (adjusted for age, height, weight and total spine BMD). We report odds ratios with 95% confidence intervals for each standard deviation change in mode. Complete data were available for 2494 women. Mean age was 61.5 (± 7.4) years. 1369 women reported going through menopause, 96 women self-reported osteoporosis and 339 women reported chronic back pain. 80% of women reported at least 1 live birth. Lumbar spine shape was not associated with back pain in this cohort. Two modes were associated with menopause (modes 1 & 2), 1 mode with parity (mode 1) and 2 modes with osteoporosis (modes 3 & 5). Mode 1 (43.6% total variation), describing lumbar curvature was positively associated with both menopause [OR 1.15 95% CI 1.00–1.33, p=0.05] and parity [OR 1.058 95% CI 1.03–1.0, p=0.01]. Mode 3, describing decreased vertebral height was positively associated with osteoporosis [OR 1.40 95% CI 1.14–1.73, p=0.001]. Conclusion. Menopause and parity were associated with a curvier lumbar spine and osteoporosis with decreased vertebral height. Shape was not associated with back pain. No conflicts of interest.  . Sources of funding. Wellcome Trust collaborative award ref 209233


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_X | Pages 56 - 56
1 Apr 2012
Lakshmanan P Dvorak V Schratt W Thambiraj S Collins I Boszczyk B
Full Access

The footplate in the current available TDR is flat without any allowance for endplate concavity in the sagittal plane. To assess the morphology of the endplates of the lower lumbosacral in the sagittal plane, and to identify the frequently occurring shape patterns of the end plates at each level. Retrospective Study. 200 consecutive magnetic reasonance imaging (MRI) scans of patients between the age of 30 and 60 years were analysed. In each endplate, the anteroposterior width, the height of concavity of the endplate, and the distance of the summit from the anterior vertebral body margin were noted. The shape of the endplate was noted as oblong (o) if the curve was uniform starting from the anterior margin and finishing at the posterior margin, eccentric (e) if the curve started after a flat portion at the anterior border and then curving backwards, and flat (f) if there is no curve in the sagittal plane. The shape of the end plate is mostly oblong at L3 IEP(59%), equally distributed between oblong and eccentric at L4 SEP (o=43.5%, e=46.5%), eccentric at L4 IEP (e=62.5%), eccentric at L5 SEP (e = 59.0%), eccentric at L5 IEP (e=94.0%), and flat at S1 SEP (f=82.5%). As there is a difference in the shape of the endplate at each level and they are not uniform, there is a need to focus on the sagittal shape of the footplate to avoid subsidence and mismatch of the footplate in cases of endplate concavity


The Bone & Joint Journal
Vol. 105-B, Issue 4 | Pages 431 - 438
15 Mar 2023
Vendeuvre T Tabard-Fougère A Armand S Dayer R

Aims

This study aimed to evaluate rasterstereography of the spine as a diagnostic test for adolescent idiopathic soliosis (AIS), and to compare its results with those obtained using a scoliometer.

Methods

Adolescents suspected of AIS and scheduled for radiographs were included. Rasterstereographic scoliosis angle (SA), maximal vertebral surface rotation (ROT), and angle of trunk rotation (ATR) with a scoliometer were evaluated. The area under the curve (AUC) from receiver operating characteristic (ROC) plots were used to describe the discriminative ability of the SA, ROT, and ATR for scoliosis, defined as a Cobb angle > 10°. Test characteristics (sensitivity and specificity) were reported for the best threshold identified using the Youden method. AUC of SA, ATR, and ROT were compared using the bootstrap test for two correlated ROC curves method.


Bone & Joint Open
Vol. 5, Issue 9 | Pages 809 - 817
27 Sep 2024
Altorfer FCS Kelly MJ Avrumova F Burkhard MD Sneag DB Chazen JL Tan ET Lebl DR

Aims

To report the development of the technique for minimally invasive lumbar decompression using robotic-assisted navigation.

Methods

Robotic planning software was used to map out bone removal for a laminar decompression after registration of CT scan images of one cadaveric specimen. A specialized acorn-shaped bone removal robotic drill was used to complete a robotic lumbar laminectomy. Post-procedure advanced imaging was obtained to compare actual bony decompression to the surgical plan. After confirming accuracy of the technique, a minimally invasive robotic-assisted laminectomy was performed on one 72-year-old female patient with lumbar spinal stenosis. Postoperative advanced imaging was obtained to confirm the decompression.


Bone & Joint Research
Vol. 12, Issue 3 | Pages 202 - 211
7 Mar 2023
Bai Z Shou Z Hu K Yu J Meng H Chen C

Aims

This study was performed to explore the effect of melatonin on pyroptosis in nucleus pulposus cells (NPCs) and the underlying mechanism of that effect.

Methods

This experiment included three patients diagnosed with lumbar disc herniation who failed conservative treatment. Nucleus pulposus tissue was isolated from these patients when they underwent surgical intervention, and primary NPCs were isolated and cultured. Western blotting, reverse transcription polymerase chain reaction, fluorescence staining, and other methods were used to detect changes in related signalling pathways and the ability of cells to resist pyroptosis.


Bone & Joint Open
Vol. 4, Issue 11 | Pages 873 - 880
17 Nov 2023
Swaby L Perry DC Walker K Hind D Mills A Jayasuriya R Totton N Desoysa L Chatters R Young B Sherratt F Latimer N Keetharuth A Kenison L Walters S Gardner A Ahuja S Campbell L Greenwood S Cole A

Aims

Scoliosis is a lateral curvature of the spine with associated rotation, often causing distress due to appearance. For some curves, there is good evidence to support the use of a spinal brace, worn for 20 to 24 hours a day to minimize the curve, making it as straight as possible during growth, preventing progression. Compliance can be poor due to appearance and comfort. A night-time brace, worn for eight to 12 hours, can achieve higher levels of curve correction while patients are supine, and could be preferable for patients, but evidence of efficacy is limited. This is the protocol for a randomized controlled trial of ‘full-time bracing’ versus ‘night-time bracing’ in adolescent idiopathic scoliosis (AIS).

Methods

UK paediatric spine clinics will recruit 780 participants aged ten to 15 years-old with AIS, Risser stage 0, 1, or 2, and curve size (Cobb angle) 20° to 40° with apex at or below T7. Patients are randomly allocated 1:1, to either full-time or night-time bracing. A qualitative sub-study will explore communication and experiences of families in terms of bracing and research. Patient and Public Involvement & Engagement informed study design and will assist with aspects of trial delivery and dissemination.


Bone & Joint Open
Vol. 5, Issue 7 | Pages 612 - 620
19 Jul 2024
Bada ES Gardner AC Ahuja S Beard DJ Window P Foster NE

Aims

People with severe, persistent low back pain (LBP) may be offered lumbar spine fusion surgery if they have had insufficient benefit from recommended non-surgical treatments. However, National Institute for Health and Care Excellence (NICE) 2016 guidelines recommended not offering spinal fusion surgery for adults with LBP, except as part of a randomized clinical trial. This survey aims to describe UK clinicians’ views about the suitability of patients for such a future trial, along with their views regarding equipoise for randomizing patients in a future clinical trial comparing lumbar spine fusion surgery to best conservative care (BCC; the FORENSIC-UK trial).

Methods

An online cross-sectional survey was piloted by the multidisciplinary research team, then shared with clinical professional groups in the UK who are involved in the management of adults with severe, persistent LBP. The survey had seven sections that covered the demographic details of the clinician, five hypothetical case vignettes of patients with varying presentations, a series of questions regarding the preferred management, and whether or not each clinician would be willing to recruit the example patients into future clinical trials.


The Bone & Joint Journal
Vol. 104-B, Issue 11 | Pages 1242 - 1248
1 Nov 2022
Yang X Arts MP Bartels RHMA Vleggeert-Lankamp CLA

Aims

The aim of this study was to investigate whether the type of cervical disc herniation influences the severity of symptoms at the time of presentation, and the outcome after surgical treatment.

Methods

The type and extent of disc herniation at the time of presentation in 108 patients who underwent anterior discectomy for cervical radiculopathy were analyzed on MRI, using a four-point scale. These were dichotomized into disc bulge and disc herniation groups. Clinical outcomes were evaluated using the Neck Disability Index (NDI), 36-Item Short Form Survey (SF-36), and a visual analogue scale (VAS) for pain in the neck and arm at baseline and two years postoperatively. The perceived recovery was also assessed at this time.


Orthopaedic Proceedings
Vol. 97-B, Issue SUPP_2 | Pages 21 - 21
1 Feb 2015
Pavlova A Bint-E-Siddiq A Cooper K Barr R Meakin J Aspden R
Full Access

Background and Aim. Spinal stability is associated with low back pain and affects the spines ability to support loads. Stability can be achieved if the applied force follows the curvature of the spine, passing close to the vertebral centroids. Previously we showed that calculated muscle forces required for stability in an idealised model increased with increasing and more evenly distributed lumbar curvatures. The purpose of this study was to calculate the muscle forces required for stability in standing in a group of healthy adults. Methods. Positional MRI was used to acquire sagittal images of the lumbar spine in a standing posture in 30 healthy adults. Sacral inclination was measured and active shape modelling used to characterise lumbar spine shape. A two-dimensional model of the lumbar spine was constructed using vertebral centroid positions and a simplified representation of the lumbar extensor muscles. The muscle forces required at each level to produce a follower load were calculated using a force polygon. Results. Sacral angle was positively correlated with the amount of overall curvature in the lumbar spine (P<0.001) but not the distribution of curvature. Muscle forces increased with increasing curvature at all lumbar levels (P<0.02). The distribution of curvature affected the muscle forces only at L3 (P<0.03). Conclusion. In a sample of healthy adults, muscle forces required to maintain stability are determined by the overall curviness of the lumbar spine and, to a lesser extent, the distribution of curvature. Variations in spinal shape should be considered when modelling lumbar spine loading. This abstract has not been previously published in whole or substantial part nor has it been presented previously at a national meeting. Conflicts of interest: No conflicts of interest. Sources of funding: This work was supported by a studentship granted to the University and awarded to AVP. An NHS Endowment grant provided further funding


Aims

In this investigation, we administered oxidative stress to nucleus pulposus cells (NPCs), recognized DNA-damage-inducible transcript 4 (DDIT4) as a component in intervertebral disc degeneration (IVDD), and devised a hydrogel capable of conveying small interfering RNA (siRNA) to IVDD.

Methods

An in vitro model for oxidative stress-induced injury in NPCs was developed to elucidate the mechanisms underlying the upregulation of DDIT4 expression, activation of the reactive oxygen species (ROS)-thioredoxin-interacting protein (TXNIP)-NLRP3 signalling pathway, and nucleus pulposus pyroptosis. Furthermore, the mechanism of action of small interfering DDIT4 (siDDIT4) on NPCs in vitro was validated. A triplex hydrogel named siDDIT4@G5-P-HA was created by adsorbing siDDIT4 onto fifth-generation polyamidoamine (PAMAM) dendrimer using van der Waals interactions, and then coating it with hyaluronic acid (HA). In addition, we established a rat puncture IVDD model to decipher the hydrogel’s mechanism in IVDD.


Orthopaedic Proceedings
Vol. 94-B, Issue SUPP_X | Pages 33 - 33
1 Apr 2012
Bucher T McCarthy M Redfern A Hutton M
Full Access

To determine whether measuring pedicle size on CT is accurate and reproducible using the WEBPACS ruler tool. Radiological analysis. A human cadaveric spine along with 5 geometrical shapes were scanned using a multislice spiral CT scanner with 1mm cuts. The objects and the pedicle diameters for lumbar and thoracic vertebrae in the axial plane were measured independently using the WEBPACS ruler tool by 2 observers (to the nearest 0.1mm). The geometrical shapes and pedicle size on the skeleton were then measured using Vernier callipers by an independent third observer. All measurements were repeated a week later. Reproducibility of the measurements was assessed using Bland and Altman plots. Accuracy was assessed using the Vernier calliper measurements as the gold standard and comparing the plots. Perfect reproducibility was achieved when measuring the geometric objects with the Vernier callipers. The error of the measurement associated when measuring the pedicles was 0.5mm. The error of the measurement for the geometric objects for observers 1 and 2 was 0.5 and 0.6mm respectively, and for the pedicles it was 1.0 and 0.6mm respectively. The WEBPACS ruler on a CT scan is accurate to within 0.5-0.6mm of the true size of an object. The error for pedicle measurements is marginally higher (0.6-1.0mm) and this may reflect the fact that they are ill defined geometric shapes. Measuring pedicle size on CT for surgical planning may have implications for small pedicles when sizing them up for a good screw. Ethics approval None Interest Statement None


Orthopaedic Proceedings
Vol. 98-B, Issue SUPP_6 | Pages 19 - 19
1 Feb 2016
Pavlova A Cooper K Meakin J Barr R Aspden R
Full Access

Purpose and Background:. Healthy adults with a curvy (lordotic) lumbar spine were shown to lift a load from the floor by stooping, while straight (flat) spines squatted. Since skin-surface motion capture often misrepresents internal curvature this study calculated internal lumbar curvature during lifting in the same cohort and compared lumbosacral motion. Methods:. Magnetic resonance imaging (MRI) was performed in standing and bending forward to 30, 45 and 60°, with markers on the skin at L1, L3, L5 and S1. Lumbar spine shape was characterised using statistical shape modelling and participants grouped into ‘curvy’ and ‘straight’ spine sub-groups (N=8). On a separate day participants lifted a box (6–15 kg) from the floor without instruction while Vicon cameras tracked sagittal movement of L1, L3 and L5 skin markers. Sacral angle (to horizontal) was calculated from pelvic markers. Matching markers during MRI and lifting sessions allowed vertebral centroid positions (L1, L3, L5, S1) during lifting to be calculated using custom MATLAB code. Results:. The curvy group had more internal lumbar lordosis at pick up despite stooping to lift the load. From upright standing motion occurred earlier at the upper lumbar levels (L1–L3) compared with lower lumbar (L3–L5). During lifting straight spines had greater rigid-body motion of the entire lumbar spine compared with curvy spines who demonstrated more varied intersegmental motion with greater sacral flexion. Conclusion:. Individuals with very lordotic spines retained some degree of internal lordosis despite stooping when lifting. The lumbar spine appears more mobile at the upper levels, L1–L3, and constrained motion was seen in those with the least lordosis


The Bone & Joint Journal
Vol. 104-B, Issue 1 | Pages 112 - 119
1 Jan 2022
Pietton R Bouloussa H Langlais T Taytard J Beydon N Skalli W Vergari C Vialle R

Aims

This study addressed two questions: first, does surgical correction of an idiopathic scoliosis increase the volume of the rib cage, and second, is it possible to evaluate the change in lung function after corrective surgery for adolescent idiopathic scoliosis (AIS) using biplanar radiographs of the ribcage with 3D reconstruction?

Methods

A total of 45 patients with a thoracic AIS which needed surgical correction and fusion were included in a prospective study. All patients underwent pulmonary function testing (PFT) and low-dose biplanar radiographs both preoperatively and one year after surgery. The following measurements were recorded: forced vital capacity (FVC), slow vital capacity (SVC), and total lung capacity (TLC). Rib cage volume (RCV), maximum rib hump, main thoracic curve Cobb angle (MCCA), medial-lateral and anteroposterior diameter, and T4-T12 kyphosis were calculated from 3D reconstructions of the biplanar radiographs.