This study aims to implement and assess the inter and intra-reliability of a modernised radiolucency assessment system; the Radiolucency In cemented Stemmed Knee (RISK) arthroplasty classification. Furthermore, we assessed the distribution of regions affected by radiolucency in patients undergoing stemmed cemented knee arthroplasty.

Stemmed knee arthroplasty cases over 7-year period at a single institution were retrospectively identified and reviewed. The RISK classification system identifies five zones in the femur and five zones in the tibia in both the anteroposterior (AP) and lateral planes. Post-operative and follow-up radiographs were scored for radiolucency by four blinded reviewers at two distinct time points four weeks apart. Reliability was assessed using the kappa statistic. A heat map was generated to demonstrate the reported regions of radiolucency.

29 cases (63 radiographs) of stemmed knee arthroplasty were examined radiographically using the RISK system. Intra-reliability (0.83) and Inter-reliability (0.80) scores were both consistent with a strong level of agreement using the kappa scoring system. Radiolucency was more commonly associated with the tibial component (76.6%) compared to the femoral component (23.3%), and the tibial anterior-posterior (AP) region 1 (medial plateau) was the most affected (14.9%).

The RISK classification system is a reliable assessment tool for evaluating radiolucency around stemmed knee arthroplasty using defined zones on both AP and lateral radiographs. Zones of radiolucency identified in this study may be relevant to implant survival and corresponded well with zones of fixation, which may help inform future research.

Introduction. We have investigated middle-term clinical results of total hip arthroplasty (THA) cemented socket with improved technique using hydroxyapatite (HA) granules. IBBC (interfacial bioactive bone cement method, Oonishi) (1) is an excellent technique for augmenting cement-bone fixation in the long term. However, the technique is difficult and there are concerns over some points, such as bleeding control, disturbance of cement intrusion to anchoring holes by granules, difficulty of the uniform granular dispersion to the acetabular bone. To improve the original technique, we have modified IBBC (M-IBBC), and investigated the middle-term clinical results and radiographic changes. Materials and Methods. K-MAX HS-3 THA (Kyocera, Japan), with tapered cemented stem with small collar and all polyethylene cemented socket, was used for THA implants (Fig.1). Basically the third generation cementing technique was used for THA using bone cement. The socket fixation was performed with bone cement (Endurance, DePuy) and HA granules (Ca10(PO4)6(OH)2, Boneceram P; G-2, 0.3–0.6mm in size, Olympus, Japan) (Fig.2). In original IBBC technique, HA granules were dispersed on reamed acetabulum before cementing. In M-IBBC technique, HA granules were attached to bone cement on plastic plate, then inserted to reamed acetabulum and pressurized (Fig.3). 112 hip joints (95 cases) were operated between June 2010 and March 2014, and followed. The average follow-up period was 6.5 years, and average age at operation was 66.5 years. The clinical results were evaluated by Japan Orthopaedic Association Hip Score (JOA score), and X-p findings were evaluated using antero-posterior radiographs. The locations of radiolucent lines were identified according to the zones described by Delee and Charnley for acetabular components, and Zone 1 was divided into two parts, outer Zone 1a and inner Zone 1b. Results and Discussion. Revision was not performed. JOA score improved from 47 to 88. Socket and stem loosening was not observed. X-p findings of sockets demonstrated radiolucent line in Zone 1a/1b/2/3 in 0.9/0/0/0% immediately after the operation, 6.3/1.8/0/0.9% at 2 years postoperatively. After 2 years there was no progressive change, however, improvement of radiolucent line in Zone 1a was observed in two cases after 3 years postoperatively. Accordingly, at 5 years radiolucent line in Zone 1a/1b was observed in 4.4/1.8%. Oonish has reported excellent clinical results of THA with IBBC (1). To easily perform IBBC, we have modified the technique, improving the problems of IBBC. In this study, radiolucent line was observed at the margin of the socket in a small number of cases, and there was no progressive change. In addition, improvement of radiolucent line was observed in M-IBBC in this study, which was not observed in conventional cementing technique. Conclusions. It is demonstrated that M-IBBC provides stable socket cement fixation for THA. The interesting finding in M-IBBC cases was the improvement of radiolucent line, suggesting osteoconductive property of hydroxyapatite granules at the interface after the operations. The promising long-term clinical results of M-IBBC method, were expected. For any figures or tables, please contact the authors directly

Introduction. IBBC (interfacial bioactive bone cement method, Oonishi) (1) is an excellent technique for augmenting cement-bone fixation in the long term. However, the technique is difficult and there are concerns over some points, such as bleeding control, disturbance of cement intrusion to anchoring holes by granules, difficulty of the uniform granular dispersion to the acetabular bone (Zone 1 in particular). To improve this technique, we have modified IBBC (M-IBBC), and investigated the short-term clinical results and radiographic changes. Materials and Methods. K-MAX HS-3 THA (Kyocera Medical, Japan), with cemented stem and all polyethylene cemented socket, was used for THA implants. Basically the third generation cementing technique was used for THA using bone cement. The socket fixation was performed with bone cement (Endurance, DePuy) and hydroxyapatite (HA) granules (Ca10(PO4)6(OH)2, Boneceram P; G-2, Olympus, Japan). In original IBBC technique, HA granules were dispersed on reamed acetabulum before cementing. In M-IBBC technique, HA granules were attached to bone cement on plastic plate, then inserted to reamed acetabulum and pressurized. HA granules (G-2) are 0.3–0.6mm in size, with 35–38% porosity and sintered at 1150â��. 51 hip joints (49 cases) were operated between June 2010 and December 2011, and followed. The average follow-up was 3.9 years, and average age at operation was 66.5 years. The clinical results were evaluated by Japan Orthopaedic Association Hip Score (JOA score), and X-p findings were evaluated using antero-posterior radiographs. The locations of radiolucent lines were identified according to the zones described by Delee and Charnley for acetabular components, and Zone 1 was divided into two parts, outer Zone 1a and inner Zone 1b. Results and Discussion. Revision was not performed. Japanese orthopaedic association (JOA) score improved from 48 to 87. Socket and stem loosening was not observed. X-p findings of sockets demonstrated radiolucent line in Zone 1a/1b/2/3 in 2/0/0/0% immediately after the operation, 9.8/2/0/2% at 1 year postoperatively. After 1 year there was no progressive change, however, improvement of radiolucent line in Zone 1a was observed in two cases after 3 years postoperatively. Accordingly, after 3 years radiolucent line in Zone 1a/1b was observed in 5.9/2%. Oonish has reported excellent clinical results of THA with IBBC (1). To easily perform IBBC, we have modified the technique, improving the problems of IBBC. In our previous report, we reported improvement of radiolucent line in IBBC (2). In this report, the similar radiographic behavior was observed in M-IBBC, which was not observed in conventional cementing technique. This finding suggests osteoconductive property of hydroxyapatite granules at the interface after the operations. Conclusions. The interesting finding in M-IBBC cases was the improvement of radiolucent line, which was observed in IBBC cases. The promising long-term clinical results of M-IBBC method, similar to IBBC cases, were expected

Introduction & Aim. The use of All-Poly Tibia has been in practice since the early 1970's. Recently due to the reports on wear and osteolysis in other articulations, this component has generated significant interest. In the current study we aim to report early medium-term results of All-poly Tibial components in elderly (>70 years) patients. Method. Study of 455 cases done between 2005-2020. All the cases were performed by a single surgeon. All-Poly Tibial component implantations were performed using Standard mechanical jigs and the same posterior-stabilized implant was used for all cases. Results. 20 cases were lost to follow-up. 25 patients died due to natural causes. Mean age at index surgery was 74 years (70 - 91 years). Preop KSS average was 47 (31- 62). Post operative at the last follow up was 87 (71- 93). Of the 410 cases there were 8 revisions, 6 for deep sepsis and 2 for periprosthetic fractures. There were no revisions for aseptic loosening or osteolysis. All cases are performing well functionally and clinically. 18 cases had a non-progressive radiolucent line beneath the Tibial component. The combination of perfect alignment and soft tissue balance creates an environment for a successful TKR. The choice of the All-Poly Tibial component for functionally low demand age group patients reduces the chances of premature wear and osteolysis. In elderly patients the implant should outlive the patient. Here it is observed that at 5-7 years aseptic loosening and subsequent revision chances are low. The all-poly Tibial component is significantly cheaper as compared to its metal back counterpart. Conclusion. An excellent clinical result in our hands for this group of patients supports the continued use of this implant strongly

Introduction. The clinical impact of radiolucent glenoid lines is controversial, where the presence of a radiolucent glenoid lines has been suggested to be an indicator of clinical glenoid loosening. The goal of this database analysis is to quantify and compare the pre- and post-operative outcomes of 427 patients who received a primary aTSA with one specific prosthesis and were sorted based upon the radiographic presence of a radiolucent glenoid line at latest clinical followup. Methods. 427 patients (mean age: 67.0yrs) with an average follow-up of 49.4 months was treated with aTSA for OA by 14 fellowship trained orthopaedic surgeons. Of these 427 patients, 293 had a cemented keel glenoids (avg follow-up = 50.8 months) and 134 had a cemented pegged glenoids (avg follow-up = 48.7 months). Cemented peg and keel glenoid patients were analyzed separately and also combined into 1 cohort: 288 patients (158 female, avg: 68.7 yrs; 130 male, avg: 64.9 yrs) did not have a radiolucent glenoid line (avg follow-up = 46.9 months); whereas, 139 patients (83 female, avg: 68.5 yrs; 56 male, avg: 64.6 yrs) had a radiolucent glenoid line (avg follow-up = 54.4 months). Outcomes were scored using SST, UCLA, ASES, Constant, and SPADI metrics; active ROM also measured. A two-tailed, unpaired t-test identified differences (p<0.05) in pre-operative, post-operative, and pre-to-post improvements. Results. The overall rate of radiolucent line formation in the glenoid for the combined peg and keel glenoid aTSA cohort was 32.6% (139 of 427 patients). The rate of radiolucent lines for the keel and peg glenoids was similar at nearly the same followup (∼50 months): 96 of 293 peg patients (32.8%) and 43 of 134 keel patients (32.1%) had a radiolucent glenoid line. Patients with cemented keeled glenoids had an average radiographic line score of 2.4 ± 1.3 which trended larger (p = 0.0875) than the average radiographic line score of 2.0 ± 1.1 of patients with cemented peg glenoids. Pre-operatively, no difference was noted between patients with and without radiolucent glenoid lines. (Figure 1) However post-operatively, patients with radiolucent glenoid lines were associated with significantly poorer clinical outcome scores according to all 5 clinical metrics and also had significantly less improvements in outcomes according to 4 of 5 outcome metrics; (Figure 2) poorer outcomes were observed for the combined cemented keeled and pegged glenoid cohorts and when each glenoid prosthesis type is analyzed separately. Additionally, patients with glenoid radiolucent lines were associated with significantly lower improvements in outcomes. (Figure 3) Finally, 24 complications were reported (5.6%), 14 for patients without radiolucent glenoid lines (4.9%) and 10 for patients with radiolucent glenoid lines (7.2%). Conclusions. This large-scale clinical outcome study demonstrated that aTSA patients with radiolucent glenoid lines were associated with significantly poorer clinical outcomes and a higher complication rate as compared to aTSA patients without radiolucent glenoid lines. The overall radiolucent line rate and the negative impact of radiolucent lines were no different between cemented keeled and cemented pegged glenoid components. Additional and longer-term follow-up is needed to confirm these conclusions. For figures/tables, please contact authors directly.

Purpose. Short metaphyseal fitting femoral stems convey stress to proximal femur and have no distal fixation. They have advantages in that there is no thigh pain and no bone loss due to stress shielding, but there is a concern for weakened fixation. So the authors evaluated whether short metaphyseal fitting femoral stems, which have only metaphyseal and no diaphyseal fixation, can acquire sufficient stability. Materials & methods. 39 cases of 36 patients who undervent uncemented total hip arthroplasty with DePuy Proxima. TM. (Johnson & Johnson orthopaedics, New Milton, UK) short metaphyseal fitting femoral stems from August 2009 to September 2011 were retrospectively evaluated. There were 19 male and 20 female cases. The mean follow-up period was 35.8(21.8∼49.2) months. Harris hip scores, WOMAC scores, UCLA scores, and presence of femoral pain were evaluated to assess clinical outcome. Femoral radiolucency in coronal and sagittal views of the hip, femoral stem loosening, and displacement was measured to evaluate radiological outcome. Distance between femoral stem and cortical bone was also measured to assess the relationship with radiolucency and loosening according to degree of contact. Results. Harris hip score before and after operation was 49.8(37–59) and 96.0(71–100) on average. WOMAC score improved from 44.1(31.9–56.3) to 91.8(62.3–100)after operation. UCLA activity score improved from 3.8(2–5) to 7.5(4–9) after operation. When assessed with 1mm as the standard, radiolucent line was shown in 5 cases(12.8%). When the area around the stem was divided into 5 sections, there were 3 cases in which radiolucent line was observed in all 5 sections, 1 case in which radiolucent line was found in only section 4, and 1 case in which radiolucent line was found only in section 5. There was 1 case(2.6%) that required revision THA due to femoral stem loosening. Femoral radiolucency and loosening on coronal and sagittal views increased with greater distance between femoral stem and cortical bone (p=0.002). Conclusion. In uncemented total hip arthroplasty with short metaphyseal fitting femoral stem, it is important to fill the femoral metaphyseal medullary cavity completely with the femoral stem. Therefore, there is severe loss of cancellous bone at proximal femur. Stability varies with differing degree of contact between femoral stem and proximal femoral cortical bone observed on postoperative coronal and sagittal views. When short metaphyseal fitting femoral stems are used, adequate early fixation can be achieved only with understanding of such characteristics as well as sufficient proficiency of the operator

Purpose. To evaluate the radiographic long-term result of femoral revision hip arthroplasty using impacted cancellous allograft combined with cemented, collarless, polished and tapered stem. Materials and methods. Among 28 patients with impacted cancellous allograft with a cemented stem, 28 hips from 26 consecutive patients were analyzed retrospectively. The average patient age was 59 years. The follow-up period ranged 9 years 6 months to 14 years 5 months (mean, 12, 5 years). Radiographic parameters analyzed in this study included subsidence of the stem in the cement, subsidence of the cement mantle in the femur, bone remodeling of the femur, radiolucent line, and osteolysis. Results. Radiographic analysis showed very stable stem initially. 27 stems showed minimal subsidence (less than 5 mm) and 1 stem showed moderate subsidence (about 10 mm) in the cement. But there was no mechanical failure and subsidence at the composit-femur interface. Evidence of cortical and trabecular remodeling were observed in all cases. No radiolucent line or osteolysis were found in the follow-up period. There were 4 proximal femoral cracks and 1 distal femoral splitting during operation. Conclusion. The result of cemented stem revision with the use of impacted cancellous allograft was good long-terand femoral bone stock deficiency may be reconstructed successfully

Purpose. To evaluate the radiological changes after metal on metal resurfacing arthroplasty. Materials and Methods. Between December 1998 and August 2004, 166 hips in 150 patients who underwent metal resurfacing arthroplasty and followed up more than 4 years. Their mean age at the time of operation was 37.3 years(range, 15–68 years) and mean period of follow-up was 6.1 years(range, 48–95 months). The cause of arthroplasty included 115 avascular necrosis, 43 osteoarthritis, 7 ankylosing spondylitis, 1 haemophilic arthropathy. All patients had anteroposterior, translateral radiographs of the hip made preoperatively and each follow-up visit, and we analyzed radiographic findings such as radiolucencies or impingement signs around implant, neck narrowing and heterotopic ossification. Results. There was a no significant difference between preoperative and postoperative Harris hip score and range of motion. The mean stem-shaft angle was 137.4°, and 55.4% were ranged 130° to 140°. The mean inclination of acetabular component was 44.9°. There were no radiolucent lines or osteolytic lesion around the acetabular components, but 3 hips showed radiolucency around the head-neck junction(1.8%) and 4 hips showed radiolucent line around the stem (2.4%). 12 hips had impingement signs around the head-neck junction (7.2%), and 2 cases showed neck narrowing (1.2%). 3 cases had some heterotopic ossification (1.8%). In 12 cases with impingement signs, the stem-shaft angle and inclination of acetabular component were lower than control group. Pseudotumor was not found in this cohort. Conclusions. This study demonstrates no serious radiological problems till the midterm follow-up after resurfacing arthroplasty, but osteolytic lesion such as radiolucent line around head-neck junction, neck narrowing can be a potential cause of failure in future. Even though the radiolucent line around stem of femoral component revealed no subjective symptom yet, it suggests the micromotion of femoral component which can lead to femoral component loosening. The most common radiological findings, impingement signs, seem not to have clinical significance

Purpose. We have compared the short-term clinical results of total hip arthroplasty (THA) using PMMA bone cement and hydroxyapatite (HA) granules (interfacial bioactive bone cement method; IBBC) with the results of conventional method using PMMA bone cement. Materials and Methods. K-MAX HS-3 THA (JMM, Japan), with cemented titanium alloy stem and all polyethylene cemented socket, was used for THA implants. The third generation cement technique was used for the conventional THA (Group C) using bone cement (Endurance, DePuy). In the IBBC group (Group BC), the socket fixation was performed by the third generation cement technique with HA granules (Boneceram P; G-2, Olympus, Japan) according to the Ohnishi's method. In both groups, the stems were fixed by conventional cementing technique using cement gun. 76 hip joins (69 cases) were operated between April 2005 and August 2007, and followed. The group C (22 hips, 19 cases, average follow-up; 5.6 years, average age at operation; 64 years) and the group BC (54 hips, 50 cases, 5.4 years, 65 years) were investigated. Results. One revision was performed in BC group due to late infection. Japanese orthopaedic association (JOA) score improved from 42/48 to 85/87 in Group C/BC. Socket loosening was not observed radiographically. X-p findings of Group C/BC demonstrated radiolucent line in the outer part of Zone 1 in 18%/16% immediately after operation, 24%/23% at 2 years postoperatively. After 2 years there was no change in Group C, however, improvement of radiolucent line (gap filling) with bone remodeling was observed in two cases in Group BC at 3 years postoperatively. Conclusions. The short-term clinical results of Group BC using IBBC method and Group C using conventional method were equally satisfactory. The interesting finding in Group BC case was the improvement of radiolucent line (gap filling), suggesting osteoconductive property of hydroxyapatite granules at the interface after the operations. The promising clinical results of IBBC method in the long term were expected

Background. Total ankle arthrpoplasty (TAA) was performed frequently for ankle deformity caused by rheumatoid arthritis (RA) and osteoarthritis (OA). TAA has some advantages over ankle arthrodesis in range of motion (ROM). However, loosening and sinking of implant have been reported with several prostheses, especially constrained designs. Recently, we have performed mobile bearing TAA and report short term results of this prosthesis followed average 3 years. Method. 20 total ankle prostheses were implanted in patients with RA (n=14) or OA (n=6) in 19 patients (5 male and 14 female, one bilateral), between 2005 and 2009. We used FINE total ankle arthroplasty that is mobile bearing system (Nakashima Medical Co., Ltd, Okayama, Japan). All patients were assessed for American Orthopaedic Foot and Ankle Society (AOFAS) score, ROM in plantar flexion and dorsiflexion at the point of pre-operation and final follow-up. We evaluated radiolucent line, sinking, and alignment of prostheses at final follow-up. Results. At the operation, patients were, on average, 64.1 years old. The mean follow-up period was 34.0 (6∼55) months. We found excellent satisfaction and a significant improvement of AOFAS score. Plantar flexion and dorsiflexion also improved compared with the preoperative state, but not significantly (table 1). At final follow-up, five ankles (25%) showed radiolucent line around the components or sinking of prostheses. Three ankles (15%) was performed reoperation, due to early infection, progressive medial OA change by sinking, and loosening of the talus component. Discussion. Radiolucent line around the components or sinking of prostheses occurred at high frequency (25%). But, only two ankles (10%) were had to reoperation, cause by pain. We take account of the fact that the symptom was lack in spite of radiological changes. Good clinical results can be achieved with FINE total ankle arthroplasty system. However, this series was short term of follow-up. We need to evaluate mid- and long- clinical results. Mobile bearing total ankle arthroplasty is a treatment option for RA and OA

Background. The short stem prosthesis showed good results in patients with primary osteoarthritis. However, there were a few studies about the short stem THA in patients with osteonecrosis of the femoral head (ONFH). Objective. To evaluate the clinical and radiographic results of the short stem THA in patients with ONFH. The authors hypothesized that the short stem THA would be a promising procedure for patients with ONFH. Material and Method. The authors reviewed 120 osteonecrotic hips in 93 patients who underwent THA with Metha® short stem from November 2010 to February 2013. The appearance of bone trabeculae development and radiolucent line was reviewed using Gruen's classification. The Harris hip score (HHS) was recorded at 6, 12, 24 and 36 months postoperative for evaluating the clinical results. Results. The mean age of patients was 44.4 years (18–68) with the mean BMI of 22.7 (15.1–32.5, SD 3.5). The average follow-up period was 29.2 months (20–47). The mean HHS was significantly improved from 43.9 (22.7–74, SD 7.7) preoperatively to 97.7 (85.9–100, SD 2.7) at 6 months postoperatively (p<0.01). The radiographic change around the stems showed bone trabeculae development at zone 1 (77 cases)(64.2%), 2 (27 cases)(22.5%), 3 (106 cases)(88.3%), 6 (120 cases)(100%) and 7 (115 cases)(95.8%). There was 1 case (0.8%) of 5 mm subsidence and the radiolucent line was observed in zone 1. There were 6 cases (5%) of intraoperative femoral fractures and were treated with cerclage wires, no further subsidence was observed. There was 1 case (0.8%) of distal stem perforation which had stable bone ingrowth. No revision was required. Conclusion. The clinical and radiographic results of the short stem THA in patients with ONFH are generally satisfactory. Its design enables preservation of the bone stock and the bone trabeculae appear to confirm the assumption of proximal force transmission. The authors believe that the short stem THA is a promising procedure for patients with ONFH

We hypothesised that the excellent alignments achieved in UKA using a navigation system(NA-MIS UKA) would improve mid-term clinical results versus UKA without a navigation system(MIS-UKA). The clinical results and the component alignment accuracies of NA-MIS UKA and MIS UKA were compared after a minimum follow-up of five years. 56 UKAs in the navigation group and 42 UKAs in conventional group were included. The radiological measurements with regard to the mechanical axis, the inclination of the femoral and tibial components, and radiolucent line or loosening were evaluated and compared between two groups. The clinical evaluations were performed using ROM, WOMAC, HSS and pain score. A significant inter-group difference was found in terms of WOMAC or HSS, pain scores. In the sagittal inclination of the femoral and tibial components, radiolucent line, there were no statistical differences between two groups. However, the outlier numbers at mechanical axis, the mean of coronal inclination of the femoral and tibial component in the two groups was significantly different. The navigation system in UKA can provide improved alignment accuracy of the lower extremity, also there were significant differences in functional outcomes after 5 year-follow-up

Background. Composite screws of uncalcined and unsintered hydroxyapatite (HA) particles and poly-l-lactide (PLLA) were developed as completely absorbable bone fixation devices. So far the durability of HA-PLLA composite screws is unclear when used for the fixation of acetabular bone graft in total hip arthroplasty under full-weight conditions. We have used this type of screw for the fixation of acetabular bone graft in cemented or reverse-hybrid total hip arthroplasty since 2003. Hence, we conducted a follow-up study to assess the safety and efficacy of these screws when used for cemented socket fixation. Methods. During 2003–2009, HA-PLLA composite screws were used for fixation of acetabular bone graft in cemented or reverse-hybrid primary THA in 106 patients (114 cases). All the THAs were performed through direct lateral approaches, and postoperative gait exercise with full weight bearing usually started two days after surgery. One patient died of an unrelated disease and seven patients were lost to follow-up within 5 years. Finally, 98 patients (106 cases) were followed up for over 5 years and were reviewed retrospectively (follow-up rate, 93%). Radiographic loosening of the acetabular component was assessed according to the criteria of Hodgkinson et al., and the radiolucent line around the socket was evaluated in all zones, as described by DeLee and Charnley. Results. The patient population comprised 10 men and 88 women with a mean age of 60.3 years (range, 41–81 years) at the time of surgery. The mean follow-up period was 7.6 years (range, 5–11 years). The original diagnosis for primary THA was secondary osteoarthritis in 97 cases and high hip dislocation in nine cases. No patient in this series required revision surgery, and no radiographical loosening occurred during the follow-up period. Grafted bone union was confirmed in all cases, and no apparent osteolysis around the cemented socket or composite screws was detected. Configurations of the HA-PLLA composite screws appeared obscure on radiographs at 5 years after surgery, and only osteosclerotic traces remained in the screw positions at the final follow-up. This finding was consistent in this series. The screw heads sometimes appeared to be broken with absorption within 3 years of surgery, and the remnants were identified in situ at the final follow up. Kaplan–Meier survival analyses with socket revision surgery for any reason, socket loosening, and appearance of a radiolucent line >1 mm in any zone as the endpoints yielded survival rates of 100%, 100%, and 86.8% at 5 years, and 100%, 100%, and 85.8% at 10 years, respectively. Conclusion. This absorbable screw seems to have no negative effects on the mid-term clinical results of cemented socket fixation

Introduction. Achieving primary and long-term stability of femoral implant is critical for THA. This can be influenced by the shape and location of surface preparation as well as geometry. The Corail® stem has developed in 1986 in France, which is a straight quadrangular, and full HA coated standard titanium alloy stem featuring a metaphyseal tulip flare in combination with horizontal and vertical grooves. We have performed 75 THAs using it since May 2013. The purpose of this study was to evaluate radiographic changes of femur over time in Japanese patients after THA using this HA coated stem. Materials and Methods. Between May 2013 and September 2015, we implanted 75 THAs using a Corail® stem (DePuy-Synthes) in 66 patients. Their ages at operation were 47 to 93 years (avg. 66.5 years). Durations of follow up were 6 to 34 months after implantation (avg. 13.7 months). Acetabular components were standard titanium alloy, either 37 Pinnacle Porocoat®, 19 Pinnacle Gription® (DePuy-Synthes), 8 Ranawat®, 5 Regenerex®, or 6 G7® (Zimmer-Biomet) uncemented cups. Heads were either 73 BIOLOX delta® ceramic (CeramTec) or 2 CoCr. Liners were either 56 Marathon® (DePuy-Synthes) or 19 E1® HXLPE (Zimmer-Biomet). We studied 74 hips except one hip which was revised due to infection at the time of 3 weeks after surgery. Postoperative radiographic evaluations were done at the time of 2, 4, 6, 9, 12 months and then every 6 months thereafter. We examined cancellous condensation, radiolucent line, osteolysis, cortical hypertrophy and stress shielding using both of plain X-ray and Tomosynthesis (Shimadzu, Japan). Results. The stem size included #8 in two hips, #9 in seven hips, #10 in eleven hips, #11 in twenty three hips, #12 in thirteen hips, #13 in ten hips, #14 in seven hips and #15 in one hip. Four periprosthetic fractures occurred during surgery. There were three subsidences in combination with radiolucent line at Gruen Zone 1 (Fig. 1, 2 and 3). The cancellous condensation was observed in 25% of all at the time of 2 months, 63% at 4 months, 87% at 6 months and 100% at 9 months after surgery at Gruen Zone 2, 3, 5 and 6 (Fig. 4, 5 and 6). At the latest follow-up, osteolysis, cortical hypertrophy and stress shielding were no evident in each hip. Discussion. Primary stability of the Corail® stem must be achieved in a bed of cancellous bone. ARTRO group recommends that the correct size is the size that fills the femoral cavity to within 1 to 2mm distance from the cortices in templating process. We followed this indication intraoperatively in early days, but we experienced three subsided cases that might be caused by this indication. In present, we emphasize to gain the surgical tip to feel both axial and rotational stability by the final broach rather than the indication in templating process. Radiological appearance of the remaining cancellous bed shows 0.5 to 1mm distance from the cortices and we don't have any stem subsidence after we changed out previous surgical technique

INTRODUCTION. The concept of anatomical stam is fit-and-fill in the proximity of the femur and to expect wall fixation, following to reduce thigh pain and stress shielding. Although the femoral medullary form and size are different in each races. CentPillar TMZF stem (stryker . ®. ) is anatomical stem designed based on computer-tomography of Japanese femurs. The purpose of this study was to evaluate clinical and radiographic outcomes of CentPillar TMZF stem at a mean of 3.6 years postoperatively. METHODS. We asseses the results of 98 primary total hip arthroplasty (THA) performed using a CentPillar TMZF stem in 91 Japanese patients (4 males, 94 females) undergoing surgery between August 2007 and June 2011, the mean age at the time of surgery was 62.0 (41–81) years old. The Diagnosis were osteoarthritis (OA) in 91 hips, rapidly destructive coxopathy (RDC) in 4 hips, rheumatoid arthritis (RA) in 3 hips. Clinical and radiographic assessments were performed for every patient for every follow up using Japan Orthopaedic Association (JOA) Score, thigh pain, revision surgery and complications. Radiographic assessments were including stem alignment on anteroposterior radiograph, stress shielding, bone remodeling, radiolucent line, osteolysis, loosening and subsidence. RESULTS. 50.7 points of the postoperative mean JOA score was significantly improved to 96.3 points postoperatively. No patients showed thigh pain. Intraoperative calcar fracture was occurred in 1 hip. In 97 hips of 98 hips (98%) stem was implanted in neutral position (within ±3 degrees). With regard to stress shielding, 69 hips (70%) had none or only 1. st. degree resorption; 29 hips (30%) had 2. nd. degree and no cases had 3. rd. and 4. th. degree. Spot welds were developed in 71 hips (71%; Gruen zone 2 and 6), and cortical hypertrophy were observed in 2 hips (2%; Gruen zone 3 and 5). No cases developed radiolucent line, osteolysis, loosening, and subsidence. No revision surgery were requied up to 5.8 years postoperatively. DISCUSSION AND CONCLUSION. CentPillar TMZF stem provided a stable fixation, with excellent short-term clinical and radiographic outcomes. The strong proximal fixation was predictably enabled, and there were few cases fixed distal portion of the femur. These finding suggested CentPillar TMZF stem fits Japanese medullary form and can expect the long-term survival

Introduction. Ankle arthrodesis is a common treatment for destroyed ankle arthrosis with sacrificing the range of motion. On the other hand, total ankle arthroplasty (TAA) is an operation that should develop as a method keeping or improving range of motion (ROM); however, loosening and sinking of the implant have been reported in especially constrained designs of the implant. The concept of FINE TAA is the mobile bearing system (Nakashima Medical Co., Ltd, Okayama Japan) that can reduce stress concentration to implants. The purpose of this study is to evaluate the short-term results of FINE TAA. Objectives and Methods. We performed FINE TAA for osteoarthritis (OA) (2 ankles of 2 patients) and rheumatoid arthritis (RA) (4 ankles of 3 patients). All patients were female. The mean age of the patients was 71.4 years old at the operation. The mean follow-up period was 32.6 (range, 18–55) months. All patients were assessed for Japan Orthopedic Association (JOA) score and ROM in plantar flexion and dorsiflexion at the point of pre-operation and final follow-up. We evaluated radiolucent line, subsidence, and alignment of implants at the latest follow-up. Results. JOA score improved from 34.8 to 72.2 on average. ROM improved from 4.0 ± 5.5 º to 7.0 ± 4.5 º on average in plantar flexion and from 21.0 ± 17.0 º to 31.0 ± 16.0 º in dorsiflexion. One case underwent an ankle arthrodesis because of the implant loosening. This failed case was very obese (70 kg of body weight, 31.0 of Body Mass Index) and her activity was relatively high. One ankle showed radiolucent line around the components with no symptoms. The alignment of implants was slightly varus and anteversion (the mean values of alpha angle was 88.0 ± 1.2º, beta angle was 84.0 ± 9.2º, and gamma angle was 2.1 ± 0.2º). Discussion. The ankle joint is highly loaded up to five times body weight on small surface of contact area during walking. Therefore, the poor results have been published after TAA with using fixed-bearing 2-component prostheses compared to ankle arthrodesis. On the other hand, FINE TAA was designed as 3-component mobile bearing system that can reduce stress concentration compared to conventional TAA. We experienced implant failure in one obese case but short-term results of other cases were acceptable. Good clinical results can be expected with FINE TAA except for the obese case. We should pay careful attention to the surgical indication. Conclusion. Our short term results of FINE TAA were acceptable except for one obese case. We should evaluate further mid- and long- clinical results

Introduction. Unicompartmental knee arthroplasty(UKA) has become a popular treatment alternative when one compartment of the knee is affected. Excellent intermediate results have been reported in association with the Miller-Galante unicompartmental implant. These excellent results are based on the development of the implants and the stringent patients selection. The functional cruciate ligaments has been a prerequisite for patients undergoing UKA. However, UKA can be one of the procedures in elderly patiants with deficient anterior cruciate ligaments(ACL) but with no symptoms of instability. The purpose of this report is to determine the clinical results after UKA in patients with ACL-deficient knees and compared those after UKA in ACL-intact knees. Patients and Methods. We identified 332 cases operated from May 2000 to April 2013 whose ACL were evaluated before the operation by MRI., and classified into ACL-deficient group and ACL-intact group. Fixed-bearing Miller-Galante Unicompartmental Knee System or Zimmer Unicompartmental High-Flex Knee Sytem was implanted in all patients. ACL-deficient group included 17 men and 68 women who had an average age of 79 years(range, 70–91 years) at the time of the operation. The underlying diagnosis was osteoarthritis for 77 knees and osteonecrosis for 8 knees. ACL-intact group included 49 men and 198 women who had an average age of 77 years(range, 60–88 years) at the time of the operation. The underlying diagnosis was osteoarthritis for 176 knees and osteonecrosis for 71 knees. Followup for ACL-deficient group was 3.5 years(1–8.8years), and 3.6years (1–13.2years) for ACL-intact group. Results. Japanese Orthopaedic Association score improved from 46.7points preoperatively to 76.5 points at the time of the latest followup in ACL deficient group, and 49.6 points to 81.5 points in ACL-intact group. 7 knees(8.2%) had a partial radiolucent line around the tibial component in ACL-deficient group, and 30 knees(12.6%) had a partial radiolucent line around the tibial component(30knees) or femoral component(one knee) in ACL-intact group, all of these radiolucent lines were <2mm in thickness and remained stable over time. Two knees(2.3%) in ACL-deficient group and five knees(2.0%) in ACL-intact group were revised because of progression of arthritis in the lateral tibiofemoral or patellofemoral components. All of the components in revised knees were well fixed and no polyethylene wear was seen at the time of revision. All of these results between two groups were not significantly different. Conclusion. Controversy exists about whether a functional ACL is necessary to achieve success with UKA. In classical indication, UKA should not be done in patients with symptoms of ACL instability. In elderly active patient with deficient ACL, we should prefer total knee arthroplasty. But UKA should judiciously be done in eldery patients with deficient ACL whose activity is low but with no symptoms of instability

Introduction:. Lateralization of reversed shoulder arthroplasty provides improvement in range of motion and decreases inferior scapular notching. The purpose of this study was to verify if the autologous cancelous bone graft harvested from the humeral head does heal constantly in a large cohort of patients followed for a long time. Methods:. Cohort of 92 consecutive patients operated between 2006 and 2010 with a BIORSA for definitive shoulder pseudoparalysis, secondary to cuff tear arthropathy (CTA) or massive, irreparable cuff tear (MCT). The autogenous cancelous graft was harvested from humeral head in all cases. Eight patients were lost for follow up, and four died before 2 years. The remaining 80 patients underwent clinical, radiographic and CT assessment at a minimum FU of 24 months. Mean age was 73 years. Three independent observers evaluated notching, partial or total glenoid or humeral loosening and viability of the graft. Constant-Murley score, range of motion and subjective shoulder value (SSV) were recorded. The mean follow up was 39 months (range 24–74 months). Results:. The bone graft did healed completely in 96% of the cases (77/80); the thickness of the graft remained stable through the years. There were two cases of glenoid loosening: one nonunion of the graft at the scapular side was due to an important superior tilt of the glenosphere; one failure of fixation at the baseplate side was related to a low-grade infection. Another patient had a partial radiolucent line between graft and native glenoid located only above the central peg. No other radiolucent line around peg, screws or baseplate was found. Inferior scapula notching was observed in 19% of the cases (mainly grade 1 and 2). Each parameters of Constant score improved, and the mean SSV increased from 27% to 78%. Conclusion:. This study shows that: (1) autologous cancellous bone graft, harvested from the humeral head, does heal to the native glenoid despite the advanced age of the patients; and (2) BIO-RSA allows improvement of shoulder function (mobility, pain, strength, subjective value) with a low rate of scapular notching

Introduction. The clinical impact of scapular notching is controversial. Some reports suggest it has no impact while others have demonstrated it does negatively impact clinical outcomes. The goal of this clinical study is to analyze the pre- and post-operative outcomes of 415 patients who received rTSA with one specific prosthesis (Equinoxe; Exactech, Inc). Methods. 415 patients (mean age: 72.2yrs) with 2 years minimum follow-up were treated with rTSA for CTA, RCT, and OA by 8 fellowship trained orthopaedic surgeons. 363 patients were deemed to not have a scapular notch by the implanting surgeon at latest follow-up (72.1 yrs; 221F/131M) whereas 52 patients were deemed to have a scapular notch at latest follow-up (73.3 yrs; 33F/19M). Outcomes were scored using SST, UCLA, ASES, Constant, and SPADI metrics; active abduction, forward flexion, and internal/external rotation were also measured to quantify function. Average follow-up was 38.1 months (No Notch: 37.2; Notch: 44.4). A two-tailed, unpaired t-test identified differences (p<0.05) in pre-operative, post-operative, and pre-to-post improvements. Results. The overall scapular notching rate was 12.5%. The rTSA cohort with a scapular notch had an average notching grade of 1.3 (41 grade 1, 6 grade 2, 5 grade 3, and 0 grade 4 notches). rTSA patients with a scapular notch on average weighed significantly less (168.0 vs. 154.7 lbs; p = 0.016) and had a significantly lower BMI (27.3 vs. 26.0; p = 0.032). 8 patients without scapular notching had a radiolucent line around the humeral component (2.2%); whereas, 5 patients with scapular notching had a radiolucent line around the humeral component (10.0%). Table 1 demonstrates no difference between the cohorts in pre-operative outcomes. Table 2 demonstrates rTSA patients without scapular notching were associated with significantly larger clinical outcome scores in all 5 metrics and also had significantly improved function according to 3 of the 6 measurements as compared to rTSA patients with scapular notching. Table 3 demonstrates only one significant difference was observed in pre-to-post improvement of outcome scores between cohorts. Finally, 27 complications were reported (6.5%), 20 for patients without scapular notching (5.5%) and 7 complications for patients with scapular notching (13.5%). Discussion and Conclusions. This large-scale clinical outcome study demonstrated that patients with scapular notching are associated with significantly poorer outcomes and a greater complication rate than patients without scapular notching at a similar average post-operative follow-up. The finding that patients with lower BMI were associated with a higher notching rate is new but also intuitive as these patients can likely adduct their arm more; it may also be that the lower average BMI and weight suggests that patients with notching were also more active. One additional new finding in this analysis is that patients with scapular notching had a 4.5X greater rate of radiolucent lines around the humeral component suggesting that the UHWMPE wear debris are related to the formation of humeral radiolucent lines. Additional and longer-term follow-up is needed to confirm these conclusions

The use of cementless acetabular components is currently the gold standard for treatment in total hip arthroplasty (THA). Porous coated cups have a low modulus of elasticity that enhances press-fit and a surface that promotes osseointegration. Monoblock acetabular cups represent a subtype of uncemented cup with the liner moulded into the metal shell, minimizing potential backside wear and eliminating the chance of mal-seating. The aim of this study was to compare the short-term clinical and radiographic performances of a modular cup with that of a monoblock cup, with particular interest in the advent of lucent lines and their correlation with clinical outcomes. In this multi-surgeon, prospective, randomized, controlled trial, 86 patients undergoing unilateral THA were recruited. Participants were randomized to either a porous-coated, modular metal-on-polyethylene (MoP) acetabular component (n=46) or a hydroxyapatite (HA)- and titanium-coated monoblock shell with ceramic-on-ceramic (CoC) bearing (n=42). The porous-coated cup had an average pore size of 250 microns with an average volume porosity of 45%, whereas the monoblock shell had an average pore size of 300 microns with an average volume porosity of 48% and a HA coating thickness of 80 nm. There were no baseline demographic differences between both groups regarding sex, age, body mass index (BMI), or American Society of Anaesthesia (ASA) class (p>0.05). All of the sockets were under-reamed by 1 mm. Radiographs and patient-reported outcome measures (PROMs), including modified Harris Hip Score (mHHS), Western Ontario and McMaster Universities Arthritis Index (WOMAC) and University of California at Los Angeles (UCLA) Hip Score, were available for evaluation at a minimum of 2 years of follow-up. A radiolucent distance between the cup and acetabulum of ≥0.5 mm was defined as gap if it was diagnosed from outset or as radiolucency if it had sclerotic edges and was found on progressive x-ray analyses. Thirty-two gaps (69%) were found in the modular cup group and 28 (6%) in the monoblock one (p=0.001). Of the former, 17 filled the gaps whereas 15 turned into a radiolucency at final assessment. Of the latter, only 1 of the gaps turned into a radiolucency at final follow-up (p 0.05) in both groups. Only the porous-coated cup was an independent predictor of lucent lines (OR:0.052, p=0.007). No case underwent revision surgery due to acetabular loosening during the study period. Only 2 cases of squeaking were reported in the CoC monoblock shell. Both porous-coated modular and hydroxyapatite-coated monoblock cups showed successful clinical results at short-term follow-up, however, the former evidenced a significantly higher rate of radiolucent line occurrence, without any association with PROMs. Since these lines indicate the possibility of future cup loosening, longer follow-up and assessment are necessary