Osteotomies in the musculoskeletal system are joint preserving procedures to correct the alignment of the patient. In the lower limb, most of the pre-operative planning is performed on full leg weightbearing radiographs. However, these images contain a 2-dimensional projection of a 3-dimensional deformity, lack a clear visualization of the joint surface and are prone to rotational errors during patient positioning. Weightbearing CT imaging has demonstrated to overcome these shortcomings during the first applications of this device at level of the foot and ankle. Recent advances allow to scan the entire lower limb and novel applications at the level of the knee and hip are on the rise. Here, we will demonstrated the current techniques and 3-dimensional measurements used in supra- and inframalleolar osteotomies around the ankle. Several of these techniques will be transposed to other parts in the lower limb to spark future studies in this field

Aims. Fracture-related infection (FRI) is commonly classified based on the time of onset of symptoms. Early infections (< two weeks) are treated with debridement, antibiotics, and implant retention (DAIR). For late infections (> ten weeks), guidelines recommend implant removal due to tolerant biofilms. For delayed infections (two to ten weeks), recommendations are unclear. In this study we compared infection clearance and bone healing in early and delayed FRI treated with DAIR in a rabbit model. Methods. Staphylococcus aureus was inoculated into a humeral osteotomy in 17 rabbits after plate osteosynthesis. Infection developed for one week (early group, n = 6) or four weeks (delayed group, n = 6) before DAIR (systemic antibiotics: two weeks, nafcillin + rifampin; four weeks, levofloxacin + rifampin). A control group (n = 5) received revision surgery after four weeks without antibiotics. Bacteriology of humerus, soft-tissue, and implants was performed seven weeks after revision surgery. Bone healing was assessed using a modified radiological union scale in tibial fractures (mRUST). Results. Greater bacterial burden in the early group compared to the delayed and control groups at revision surgery indicates a retraction of the infection from one to four weeks. Infection was cleared in all animals in the early and delayed groups at euthanasia, but not in the control group. Osteotomies healed in the early group, but bone healing was significantly compromised in the delayed and control groups. Conclusion. The duration of the infection from one to four weeks does not impact the success of infection clearance in this model. Bone healing, however, is impaired as the duration of the infection increases. Cite this article: Bone Joint Res 2024;13(3):127–135

Several emerging reports suggest an important involvement of the hindfoot alignment in the outcome of knee osteotomy. At present, studies lack a comprehensive overview. Therefore, we aimed to systematically review all biomechanical and clinical studies investigating the role of the hindfoot alignment in the setting of osteotomies around the knee. A systematic literature search was conducted on multiple databases combining “knee osteotomy” and “hindfoot/ankle alignment” search terms. Articles were screened and included according to the PRISMA guidelines. A quality assessment was conducted using the Quality Appraisal for Cadaveric Studies (QUACS) - and modified methodologic index for non-randomized studies (MINORS) scales. Three cadaveric, fourteen retrospective cohort and two case-control studies were eligible for review. Biomechanical hindfoot characteristics were positively affected (n=4), except in rigid subtalar joint (n=1) or talar tilt (n=1) deformity. Patient symptoms and/or radiographic alignment at the level of the hindfoot did also improve after knee osteotomy (n=13), except in case of a small pre-operative lateral distal tibia- and hip knee ankle (HKA) angulation or in case of a large HKA correction (>14.5°). Additionally, a pre-existent hindfoot deformity (>15.9°) was associated with undercorrection of lower limb alignment following knee osteotomy. The mean QUACS score was 61.3% (range: 46–69%) and mean MINORS score was 9.2 out of 16 (range 6–12) for non-comparative and 16.5 out of 24 (range 15–18) for comparative studies. Osteotomies performed to correct knee deformity have also an impact on biomechanical and clinical outcomes of the hindfoot. In general, these are reported to be beneficial, but several parameters were identified that are associated with newly onset – or deterioration of hindfoot symptoms following knee osteotomy. Further prospective studies are warranted to assess how diagnostic and therapeutic algorithms based on the identified criteria could be implemented to optimize the overall outcome of knee osteotomy. Remark: Aline Van Oevelen and Arne Burssens contributed equally to this work

Purpose: To describe the role of osteotomies in rigid spinal deformities. Patients and Methods: One hundred fifty six patients with spinal deformities undergoing surgery between March 1998 and August 2005 were identified from our spine registry. Our study cohort included 23 cases where osteotomies were performed for correction. Corrective osteotomies were one of: 1) wedge osteotomy convex based; 2) wedge osteotomy dorsally based; 3) complex wedge or eggshell osteotomy for combined frontal and sagittal plane deformity. Patient’s demographics, type of deformity, underlying conditions, operative results, complications, and need for secondary procedures were documented. Results: Twenty three patients (15%) with rigid curves underwent osteotomies as part of their corrective surgery. Mean age in this cohort was 11.3 years (2–26), 35% were males, 65% females. In 17 of the patients the main deformity was scoliosis, in 5 – kyphosis and in – 1 lordosis. MMC was the leading underlying condition in 4 cases, followed by VACTER syndrome (2), congenital myopathy (2), arthrogryposis and pterygium (2), Neuro-blastoma (1) and other congenital conditions. Operative results were satisfactory in terms of cosmetics, alignment and function. In 3 cases (13%) complications were encountered, with 2 infections requiring debridement, (one requiring hardware removal) and 1 Neurofibromatosis patient undergoing her 8. th. surgical procedure, developing an intraoperative partial neurological injury with nearly full recovery. Conclusions: Osteotomies are an important part of surgery in rigid spinal deformities. These deformities occur frequently in syndromatic children making peri-operative treatment more complex. Osteotomies facilitate better outcome in terms of correction, sagittal and coronal balance and cosmetics. These procedures are highly demanding technically. However, it is our opinion that adequate correction of rigid deformity with the benefit of spinal column shortening by way of osteotomy, is protective from significant neurological traction injuries that otherwise may occur

Introduction. Version abnormalities of the femur, either retroversion or excessive anteversion, cause pain and hip joint damage due to impingement or instability respectively. A retrospective clinical review was conducted on patients undergoing a subtrochanteric derotation osteotomy for either excessive anteversion or retroversion of the femur. Methods. A total of 49 derotation osteotomies were performed in 39 patients. There were 32 females and 7 males. Average age was 29 years (range 14 to 59 years). Osteotomies were performed closed with an intramedullary saw (Figure 1). Fixation was performed with a variety of intramedullary nails. Patients requiring a varus or valgus intertrochanteric osteotomy were excluded. Pure rotational corrections only were performed. Twenty-four percent of patients had a retroversion deformity (average −8° retroversion, range +1 to −23°), 76% had excessive anteversion of the femur (average +36° anteversion, range +22° to +53°). Etiology was post-traumatic in 5 (10%), diplegic cerebral palsy in 4 (8%), fibrous dysplasia in 2 (4%), Prader-Willi Syndrome in 1 (2%) and idiopathic in 37 (76%). Previous surgery had been performed in 51% of hips. Fifty-seven percent underwent concomitant surgery with the index femoral derotation osteotomy, including hip arthroscopy in 39% (labral debridement alone or with femoral neck osteochondroplasty), a tibial derotation osteotomy in 12% and periacetabular osteotomy in 6%. Concomitant tibial osteotomies were performed to correct a compensatory excessive external tibial torsion that would be exacerbated in the correction of excessive femoral anteversion. The modified Harris Hip Score was used to assess the results in patients with a minimum of 24 months follow-up. Results. There were no non-unions. Average time to union was 3.3 months. One late infection occurred 10 months after surgery, treated successfully with hardware removal and antibiotics. Two patients, one with Prader-Willi syndrome and one with Ehlers-Danlos syndrome, were converted to total hip replacement. At an average follow-up of 6.1 years (range 2 to 19.1 years), the modified Harris Hip Score improved by 26 points (p< 0.001, Wilcoxon signed-ranks test). The results were rated as excellent in 71%, good in 22%, fair in 5% and poor in 3%. Subsequent surgery was required in 73%, 93% of which were hardware removals. Discussion and Conclusion. A closed, subtrochanteric derotation osteotomy of the femur is a safe and effective procedure to treat either femoral retroversion or excessive anteversion. Excellent or good results were obtained in 93%, despite the need for subsequent hardware removal in more than two-thirds of the patients. For figures/tables, please contact authors directly.

Introduction. Osteotomies around the knee are traditionally templated on 2D plain X-rays. Results are often inaccurate and inconsistent and multiplanar ostetomies are hard to perform. The aim of this study is to evaluate the feasibility and accuracy of virtual three-dimensional CT-based planning and correct execution of osteotomies around the knee with the aid of patient specific surgical guides and locking plates. Methods. Eight consecutive patients with significant malalignment of the lower limb were included in the study. Pre-operative CT scans of the affected limb and the normal contra-lateral side were obtained and 3D models of the patient's anatomy were created, using dedicated software. The healthy contralateral limb was mirrored and geometrically matched to the distal femur or proximal tibia of the healthy side. A virtual opening wedge correction of the affected bone was used to match the geometry of the healthy contralateral bone. Standard lower limb axes measurements confirmed correction of the alignment. Based on the virtual plan, surgical guides were designed to perform the planar osteotomy and achieve the planned wedge opening and hinge axis orientation. The osteotomy was fixed with locking plates and screws. Post-operative assessment included planar X-rays, CT-scan and full leg standing X-rays. Results. One three-planar, three bi-planar and four single-plane osteotomies were performed. Maximum weightbearing mechanical femoro-tibial coronal malalignment varied between 7° varus and 14° valgus (mean 7.6°, SD 3.1). Corrective angles varied from 7°-15°(coronal), 0°–13°(sagittal) and 0°–23°(horizontal). The maximum deviation between the planned pre-operative wedge angle and the executed post-operative wedge angle was 1° in the coronal, sagittal and horizontal plane. The desired mechanical femorotibial axis on full-leg standing X-rays was achieved in 6 patients. Two patients were undercorrected by 1° and 2° respectively. Conclusion. 3D planning and guided correction of multi-planar deformity of femur or tibia is a feasible and accurate novel technique

Osteotomies for valgus deformity are much less frequent than those for varus deformity as evidenced by published series which are, on one hand, less numerous and on the other hand, based on far fewer cases. For genu varum deformity, it has been proved that navigation allows to reach easier the preoperative correction goal. Our hypothesis was that navigation for genu valgum could be as accurate as for genu varum deformity. The aim of this paper was to present the mid-term results of 29 computer-assisted osteotomies for genu valgum deformity performed between September 2001 and March 2013. The series was composed of 27 patients (29 knees), 20 females and 7 males, aged from 15 to 63 years (mean age: 42.4+/−14.3 years). The preoperative functional status was evaluated according to the Lyshölm-Tegner score. The mean score was of 64+/−20.5 points (18–100). The stages of osteoarthritis were evaluated according to modified Ahlbäck's criteria. We operated on 12 stage 1, 9 stage 2, 5 stage 3 and 1 stage 4. 2 female patients had no osteoarthritis but a particularly unesthetic deformity (of which one was related to an overcorrected tibial osteotomy). The pre and postoperative HKA angle was measured according to Ramadier's protocol. We measured also the medial tibial mechanical angle (MTMA) and the medial femoral mechanical angle (MFMA). The mean preoperative HKA angle was 189.3°+/−3.9° (181° to 198°); the mean MFMA was 97.2° +/− 2.6° (93° to 105°) and the mean MTMA was 90.1° +/− 2.8° (86° to 95°). The goal of the osteotomies was to obtain an HKA angle of 179° +/− 2° and a MTMA of 90°+/2° in order to avoid an oblique joint line. We performed 24 femoral osteotomies (14 medial opening wedge and 10 lateral closing wedge) and 5 double osteotomies (medial tibial closing wedge + lateral opening wedge osteotomy). The functional results were evaluated according to Lyshölm-Tegner, IKS and KOO Scores, which were obtained after revision or telephone call. We did not find any complication except a transient paralysis of the common fibular nerve. 23 patients (4 lost to follow-up) were reviewed at a mean follow-up of 50.9+/−38.8 months (6–144). The mean Lyshölm-Tegner score was 92.9+/−4 points (86–100), the mean KOO score 89.7+/−9.3 (68–100), the mean IKS ≪knee≫ score 88.7 +/−11.4 points (60 à 100) and the mean ≪function≫ score 90.6 +/−13.3 points (55–100). 22 of the 23 reviewed patients (25 knees) were very satisfied or satisfied of the result. Regarding the radiological results, the mean HKA angle was of 180.1°+/−1.9° (176° to 185°), the mean MFMA of 90.7°+/−2.5° (86°-95°) and the mean MTMA of 89.1°+/−1.9° (86°-92°). The preoperative goal was reached in 86.2% (25/29) of the cases for HKA angle and in 100% of the cases for MTMA when performing double level osteotomy (5 cases). At this follow-up, no patient was revised to TKA. Computer-assisted osteotomies for genu valgum deformity lead to excellent results a mid-term follow-up. Navigation is very useful to reach the preoperative goal

Aims

Distal femoral osteotomies (DFOs) are commonly used for the correction of valgus deformities and lateral compartment osteoarthritis. However, the impact of a DFO on subsequent total knee arthroplasty (TKA) function remains a subject of debate. Therefore, the purpose of this study was to determine the effect of a unilateral DFO on subsequent TKA function in patients with bilateral TKAs, using the contralateral knee as a self-matched control group.

Total hip arthroplasty (THA) for congenital hip dysplasia (CDH) presents a challenge. In high-grade CDH, key surgical targets include cup placement in the anatomical position and leg length equality. Lengthening of more than 4 cm is associated with sciatic nerve injury, therefore shortening osteotomies are necessary. We present our experience of different shortening osteotomies including advantages and disadvantages of each technique.

89 hips, in 61 pts (28 bilateral cases), for high CDH were performed by a single surgeon from 1997 to 2022. 67 patients were female and 22 were male. Age ranged from 38 to 68 yrs. In all patients 5–8cm of leg length discrepancy (LLD) was present, requiring shortening femoral osteotomy. 12 patients underwent sequential proximal femoral resection with trochanteric osteotomy, 46 subtrochanteric, 6 midshaft, and 25 distal femoral osteotomies with simultaneous valgus correction were performed. All acetabular prostheses were placed in the true anatomical position. We used uncemented high porosity cups. Patients were followed up for a minimum of 12 months.

All osteotomies healed uneventfully except 3 non-unions of the greater trochanter in the proximal femur resection group. No femoral shaft fractures in proximally based osteotomies. No significant LLD compared to the unaffected or reconstructed side. 2 patients suffered 3 and 5 degrees malrotation of the femur in the oblique sub-trochanteric group. 3 patients suffered transient sciatic nerve palsies.

Shortening femoral osteotomies in the treatment of DDH are necessary to avoid injury to the sciatic nerve. In our series, we found transverse subtrochanteric osteotomies to be the most technically efficient, versatile and predictable in their clinical outcome, due to the ability to correct rotation and preserve the metaphyseal bone integrity, allowing for better initial stem stability. Distal femoral osteotomies allowed for controllable correction of valgus knee deformity.

Background. Osteotomies around the knee have been used to correct lower limb mal-alignment for over 50 years. The procedure is technically demanding and carries specific risks of neurovascular injury, incorrect planning and execution, and insufficient fixation. In recent years, with the advent of locking plates, fixation techniques have improved significantly but the correct planning and execution of the operation remains difficult. Despite the availability of CT and MRI 3D imaging, surgical planning is still traditionally performed on 2D plain X-rays [1]. Especially with multi-planar deformities, this technique is prone to error. The aim of this clinical pilot study is to evaluate the feasibility of virtual pre-operative three-dimensional planning and correct execution of osteotomies around the knee with the aid of patient specific surgical guides and locking plates. Patients and methods. Eight consecutive patients, presenting with significant malalignment of the lower limb were included in the study. Pre-operative CT scans of the affected limb and the normal contra-lateral side were obtained and 3D models of the patient's anatomy were created, using dedicated software (Mimics® 3-matic®, Materialise, Leuven Belgium) [2]. These models were used to evaluate the required surgical correction. The healthy contralateral limb was mirrored and geometrically matched to the distal femur or proximal tibia of the healthy side. A virtual opening wedge correction of the affected bone was used to match the geometry of the healthy contralateral bone. Standard lower limb axes measurements confirmed correction of the alignment [3]. Based on the virtual plan, surgical guides were designed to perform the planar osteotomy and achieve the planned wedge opening and hinge axis orientation (see figure 1). Apart from guiding the osteotomy, the patient specific surgical guide also guided drilling of the planned screw holes. Post-operative assessment of the correction was obtained through planar X-rays, CT-scan and full leg standing X-ray. Results. One three-planar, three bi-planar and four single-plane osteotomies were performed. All guides could be used during surgery and served accurate guidance of the osteotomy plane and screwholes. The guides matched the bone very well in all cases without remaining toggle. The maximum deviation between the planned pre-operative wedge angle and the executed post-operative wedge angle was 1° in the coronal, sagittal and horizontal plane. The desired mechanical femorotibial axis on full-leg standing X-rays was achieved in 6 patients. Two patients were undercorrected by 1° and 2° respectively. No significant peri-operative complications occurred. Conclusion. 3D planning and guided correction of multi-planar deformity of femur or tibia is a feasible and accurate novel technique

We present a new technique for corrective osteotomies in the lower limbs. The method combines the advantages of both external and internal fixation as well as minimizing soft tissue disruption and scarring. Material and Methods: Between January 2004 and August 2006, eleven osteotomies were performed on six patients. Mean age was 9.5 yrs. (6.4–15.9) Underlying pathology included cerebral palsy (3 pts), microcephaly (1), giant axonal neuropathy (1) and post traumatic growth disturbance (1). Osteotomies were performed in seven femurs (bilateral in 3 pts and unilateral in 1) and 4 tibias (2 pts bilaterally). Correction was in the transverse plane in four pts (4 femurs & 4 tibias), in the sagittal plane in one pt (2 femurs) and in multiple planes in one pt (1 femur). Surgical Technique:. Insertion of Schanz screws perpendicular to the deformed segments. Osteotomy at planned level through small incision. Correction of deformity and application of temporary external fixator. Percutaneous insertion of submuscular extraperiosteal plate and fixation with locking screws. Removal of external fixator. Results: All limbs were corrected to within 3 degrees of planned correction. Patients were allowed full ambulation. Casts were applied only if soft tissue releases were performed concomitantly. Ambulation as tolerated was initiated post operatively. There were no surgical complications. All osteotomies showed good callus formation within 6 weeks. The plate was removed uneventfully from one patient. Discussion: Multiple methods have been described for corrective osteotomies in long bones. They vary in the osteotomy level, degree of exposure, osteotomy technique and fixation method. The technique presented has the advantage of minimal violation of the periosteum and the surrounding musculature, inducing early bony union and good rehabilitation. The temporary external fixation enables accurate correction and intraoperative assessment. Disadvantages include increased surgical time and radiation exposure – however these decrease with the learning curve and hardware improvements

Aims

The aims of this study were to characterize the incidence and risk factors associated with stress fractures following periacetabular osteotomy, and to determine their effect on osteotomy union.

Background

Recent large studies of third-generation minimally invasive hallux valgus surgery (MIS) have demonstrated significant improvement in clinical and radiological outcomes. It remains unknown whether these clinical and radiological outcomes are maintained in the medium to long-term. The aim of this study was to investigate the five-year clinical and radiological outcomes following third-generation MIS hallux valgus surgery.

Introduction

Charcot neuroarthropathy is a debilitating condition that frequently leads to skeletal instability, and has an increased risk of ulceration leading to infection and amputation. However, surgical reconstruction may offer limb salvage and restauration of an ulcer-free, plantigrade stable foot for functional weight-bearing. We report on our case series according to a prospective protocol and analyse factors leading to a favourable outcome.

Introduction

Distal femoral and proximal tibial osteotomies are effective procedures to treat degenerative disease of the knee joint. Previously described techniques advocate the use of bone graft to promote healing at the osteotomy site. In this present study a novel technique which utilises the osteogenic potential of the cambial periosteal layer to promote healing “from the outside in” is described.

Introduction: The number of revision Total Hip Arthroplasties (rTHA) continues to rise in an ageing population. High fracture rates reported point out that stem removal is associated with substantial surgical complications. Extensive Trochanteric Osteotomies (ETO) may facilitate stem removal; however, it has also been associated with hazards like increased incidence of non-union, fracture of the osteotomy fragment and stem subsidence. It is not yet clear if a permissive indication for ETO may lead to better postoperative results, than removing stem and cement from the top of the femur eventually causing fractures. This study describes our experience, comparing peri-operative femoral fractures during stem removal with ETOs in rTHA. Patients & Methods: Between 1992 and 2004 45 perioperative fractures during rTHA were compared to a collective of 28 ETOs. Pre-Op and after a follow-up period of 32 months (range, 21.6 – 76 months) patients were examined clinically and radiographically. Investigation parameters were Harris-Hip score, SF-36 health score, function (0 – 6) and pain (0 – 10) score, limp, postoperative complications, implant survival and radiographic parameters (stem and trochanter migration, stem alignment, bone union). Fractures were graded using the Vancouver classification. Results: Harris hip score increase was 31 points (p = 0.004) in ETO patients and 17 points in patients with femoral fractures during stem removal. Increase for function and pain was 1.5 points and 4.4 points in ETO patients and 2 points and 3 points in patients with perioperative femoral fractures. SF-36 health score showed better increases in patients with ETOs. Joint luxation occurred in 3 (6.7%) patients with perioperative fractures and once (3.6%) in the osteotomy group. Infections were more frequently after ETO. 2 patients showed Trendelenburg gait after ETO, but were satisfied with the operation. 1 (3.6%, 12 mm) stem in the ETO group and 3 (6.7%, mean 15 mm) stems in the fracture group subsided slightly. No cable failure was detected in the ETO group, but 2 (4.4%) in the fracture group. 1 osteotomy fragment and 3 femoral fractures showed nonunion and needed re-revision. Every implanted stem had excellent alignment within standard error of ± 3°. Discussion: Our results suggest that permissive indication for ETO in rTHA may lead to better postoperative results. Especially in patients with poor bone stock, where intraoperative fractures may likely occur, proper implant exposure and rigid fragment fixation may be crucial for success. Although the ETO might be associated with nonunion and limp, this study, as well as others, demonstrates that these observations do not necessarily compromise patient satisfaction. Conclusively, risking femoral fractures during stem removal is prejudicially, compared to proper, extensive femoral osteotomies in rTHA

Conventional proximal tibial osteotomy is a widely successful joint-preserving treatment for osteoarthritis; however, conventional procedures do not adequately control the posterior tibial slope (PTS). Alterations to PTS can affect knee instability, ligament tensioning, knee kinematics, muscle and joint contact forces as well as range of motion.

This study primarily aimed to provide a comprehensive investigation of the variables influencing PTS during high tibial osteotomy using a 3D surgical simulation approach. Secondly, it aimed to provide a simple means of implementing the findings in future 3D pre-operative planning and /or clinically.

The influence of two key variables: the gap opening angle and the hinge axis orientation on PTS was investigated using three independent approaches: (1) 3D computational simulation using CAD software to perform virtual osteotomy surgery and simulate the post-operative outcome. (2) Derivation of a closed-form mathematical solution using a generalised vector rotation approach (3) Clinical assessment of synthetically generated x-rays of osteoarthritis patients (n=28; REC reference: 17/HRA/0033, RD&E NHS, UK) for comparison against the theoretical/computational approaches.

The results from the computational and analytical assessments agreed precisely. For three different opening angles (6°, 9° and 12°) and 7 different hinge axis orientations (from −30° to 30°), the results obtained were identical. A simple analytical solution for the change in PTS, ΔP_s, based on the hinge axis angle, α, and the osteotomy opening angle, θ, was derived:

ΔP_s=sin^-1(sin α sin θ)

The clinical assessment demonstrated that the absolute values of PTS, and changes resulting from various osteotomies, matched the results from the two relative prediction methods.

This study has demonstrated that PTS is impacted by the hinge axis angle and the extent of the osteotomy opening angle and provided computational evidence and analytical formula for general use.

Abstract

Background

There are many different procedures described for the correction of hallux valgus deformity. Minimally invasive surgery has become increasingly popular, with clinical and radiological outcomes comparable to traditional open osteotomy approaches. There is increasing interest in hallux valgus deformity correction using third-generation minimally invasive chevron akin osteotomy (MICA) technique.

The April 2024 Foot & Ankle Roundup³⁶⁰ looks at: Safety of arthroscopy combined with radial extracorporeal shockwave therapy for osteochondritis of the talus; Bipolar allograft transplantation of the ankle; Identifying risk factors for osteonecrosis after talar fracture; Balancing act: immediate versus delayed weightbearing in ankle fracture recovery; Levelling the field: proximal supination osteotomy’s efficacy in severe and super-severe hallux valgus; Restoring balance: how adjusting the tibiotalar joint line influences movement after ankle surgery.