Introduction. Deciding the acetabular cup inclination and anteversion is an important step in total hip arthroplasty. Despite numerous studies focusing on enhancement of precise positioning into anatomical safe zone, problem remains regarding which is the “optimal anteversion” and what is the proper anatomical reference during the surgery. Objectives. The purpose of this study is to evaluate pelvic tilt angle measured in standing
Spinopelvic mobility describes the change in lumbar lordosis and pelvic tilt from standing to sitting position. For 1° of posterior pelvic tilt, functional cup anteversion increases by 0.75° after total hip arthroplasty (THA). Thus, spinopelvic mobility is of high clinical relevance regarding the risk of implant impingement and dislocation. Our study aimed to 1) determine the proportion of OA-patients with stiff, normal or hypermobile spino-pelvic mobility and 2) to identify clinical or static standing radiographic parameters predicting spinopelvic mobility. This prospective diagnostic cohort study followed 122 consecutive patients with end-stage osteoarthritis awaiting THA. Preoperatively, the Oxford Hip Score, Oswestry Disability Index and Schober's test were assessed in a standardized clinical examination.
Introduction. The Oxford Unicompartmental Knee Replacement (OUKA) is the most popular unicompartmental knee replacement (UKR) in the New Zealand Joint Registry with the majority utilising cementless fixation. We report the 10-year radiological outcomes. Methods. This is a prospective observational study. All patients undergoing a cementless OUKA between May 2005 and April 2011 were enrolled. There were no exclusions due to age, gender, body mass index or reduced bone density. All knees underwent fluoroscopic screening achieving true anteroposterior (AP) and lateral images for radiographic assessment. AP assessment for the presence of radiolucent lines and coronal alignment of the tibial and femoral components used Inteliviewer radiographic software. The
Primary care physicians rely on radiology reports to confirm a scoliosis diagnosis and inform the need for spine specialist referral. In turn, spine specialists use these reports for triage decisions and planning of care. To be a valid predictor of disease and management, radiographic evaluation should include frontal and
Hip fractures accounts to about 86000 cases per annum in UK. AP and Lateral radiographs form an essential investigation in planning the management of these fractures. Recently it has been suggested that
Introduction. To report our early experience and suitability over unicortical fixation system to reduce and hold the bone fragments in position during a CHAOS procedure of the femur or tibia during lower limb reconstruction surgery. Materials and Methods. We report a case series of the first consecutive 10 patients (11 bones) for which this CHAOS technique was used between May 2017 and October 2019 by the same surgeon. The novel aspect of the procedure was the use of a unicortical device, Galaxy UNYCO (Orthofix, Verona, Italy), which eliminate the need for any change of fixation during the procedure. It also means the intramedullary canal was left free for the intramedullary nailing. Results. We treated 4 femurs and 7 tibias with this technique without any loss or failure of the construct. We treated uniplanar and multiplanar deformities with the angulations between 8 degrees of valgus to 15 degrees of varus and from 0 to 8 mm translation in the AP view, from 20 degrees procurvatum to 15 degrees recurvatum and 0 to 2 mm translation on the
Introduction. The functional ante-inclination (AI) of the cup after total hip arthroplasty (THA) is a key component in the combined sagittal index (CSI) to predict joint stability after THA. To accurately predict AI, we deducted a mathematic algorithm between the radiographic anteversion (RA), radiographic inclincation (RI), pelvic tilting (PT), and AI. The current study aims (1) to validate the mathematic algorithm; (2) to convert the AI limits in the CSI index (standing AI ≤ 45°, sitting AI ≥ 41°) into coronal functional safe zone (CFSZ) and explore the influences of the stand-to-sit pelvic motion (PM) and pelvic incidence (PI) on CFSZ; (3) to locate a universal cup orientation that always fulfill the AI criteria of CSI safe zone for all patients or subgroups of PM(PM ≤ 10°, 10° < PM ≤ 30°, and PM > 30°) and PI (PI≤ 41°, 41°< PI ≤ 62°, and PI >62°), respectively. Methods. A 3D printed phantom pelvic model was designed to simulate changing PT values. An acetabular cup was implanted with different RA, RI, and PT settings using robot assisted technique. We enrolled 100 consecutive patients who underwent robot assisted THA from April, 2019 to June, 2019 in our hospital. EOS images before THA and at 6-month follow-up were collected. AI angles were measured on the
Introduction. There is many reports about complications with a resurfacing total hip arthroplasty (RHA). One of the most common complications is the femoral neck fracture. A notch and malalignment were risk factors for this. For an accurate implanting the femoral component in RHA, we performed 3D template and made a patient specific template (PST) using 3D printer and applied this technique for a clinical usage. We report a preliminary early result using this novel technique. material and method. We performed 10 RHAs in nine patients (7 male, 2 female) from June 2009 to March 2010 due to osteonecrosis in 7 hips and secondary osteoarthritis in 3hips with a mean age of 48 years (40-60). We obtained a volumetric data from pre-operative CT and planned using 3D CAD software. Firstly, size of femoral components were decided from the size planning of cups. We aimed a femoral component angle as ten degrees valgus to the neck axis in AP and parallel in
Background. Recently the taper wedged stems (TWS) are used widely in Japan because of good bone fixation and ease of the procedure. However, it is unclear how TWS get initial fixation in Japanese, especially dysplasia hip or elderly patients who had stovepipe canal. The purpose of this study is to evaluate initial bone fixation of the TWS in Japanese using computed tomography and to estimate biological bone fixation of the TWS using the Tomosynthesis. Methods. We evaluated 100 hips underwent primary total hip arthroplasty using TWS. All patients were performed computed tomography within 2 weeks postoperatively and evaluated which part of the canal was made contact with the stem. 24 hips were male and 76 hips were female. According to the canal flare index, 9 hips were champagne flute canal, 80 hips were normal canal and 11 hips were Stovepipe canal. 10 hips were Dorr type A, 80 hips were Dorr type B and 10 hips were Dorr type C. The initial bone fixation was classified as Medio-lateral fit (fixed at Gruen zone 2 and 7), Flare fit (fixed at zone 2 and 6), Varus 2-point fit (fixed at zone 3 and 7), Valgus 3-point fit (fixed at zone 2, 5 and 7), Distal fit (fixed at zone 3 and 5), Total fit (fixed at zone 2,3,5,6 and 7) by the stem A-P view. Moreover, we defined Medio-lateral fit, Flare fit and Total fit as Adequate fit, Varus 2-point fit and Valgus 3-point fit as Varus or Valgus fit, Distal fit as Distal fit. The stem alignment was classified as flexion, neutral and extension by the stem
In the setting of traumatic elbow injuries involving coronoid fractures, the relative size of the coronoid fragment has been shown to relate to the stability of the joint. Currently, the challenge lies in accurately classifying the amount of bone loss in coronoid fractures. In comminuted fractures, bone loss is difficult to measure with plain radiographs or computed tomography. The purpose of this study is to describe a novel radiographic measure, the Coronoid Opening Angle (COA), on lateral elbow radiographs. We demonstrate the relationship of the COA to coronoid height and describe how this measure can be used to estimate bone loss and potentially predict elbow instability following coronoid fracture. Radiographs were drawn from a regional database in a consecutive fashion. Candidate radiographs were excluded on the basis of radiographic evidence of degenerative changes, previous surgery or injury, bony deformity, and inadequate
Radiostereometric analysis (RSA) has become the gold standard technique for measuring implant migration and wear following joint replacement due to its high measurement precision and accuracy. However, RSA is conventionally performed using two oblique radiographic views with the presence of a calibration cage. Thus, a second set of radiographs must be acquired for clinical interpretation, for example anterior-posterior and cross-table
Many pre-clinical models of atrophic non-union do not reflect the clinical scenario, some create a critical size defect, or involve cauterization of the tissue which is uncommonly seen in patients. Atrophic non-union is usually developed following high energy trauma leading to periosteal stripping. The most recent reliable model with these aspects involves creating a non-critical gap of 1mm with periosteal and endosteal stripping. However, this method uses an external fixator for fracture fixation, whereas intramedullary nailing is the standard fixation device for long bone fractures. OBJECTIVES. To establish a clinically relevant model of atrophic non-union using intramedullary nail and (1) ex vivo and in vivo validation and characterization of this model, (2) establishing a standardized method for leg positioning for a reliable x-ray imaging. Ex vivo evaluation: 40 rat's cadavers (adult male 5–6 months old), were divided into five groups (n=8 in each): the first group was fixed with 20G intramedullary nail, the second group with 18G nail, the third group with 4-hole plate, the fourth group with 6-hole plate, and the fifth group with an external fixator. Tibiae were harvested by leg disarticulation from the knee and ankle joints. Each group was then subdivided into two subgroups for mechanical testing: one for axial loading (n=4) and one for 4-point bending (n=4) using Zwick/Roell® machine. Statistical analysis was carried out by ANOVA with a fisher post-hoc comparison between groups. A p-value less than 0.05 was considered statistically significant. To maintain the non-critical gap, a spacer was inserted in the gap, the design was refined to minimize the effect on the healing surface area. In vivo evaluation was done to validate and characterize the model. Here, a 1 mm gap was created with periosteal and endosteal stripping to induce non-union. The fracture was then fixed by a hypodermic needle. A proper x-ray technique must show fibula in both views. Therefore, a leg holder was used to hold the knee and ankle joints in 90º flexion and the foot was placed in a perpendicular direction with the x-ray film.
Introduction. In our institution, we started to perform THA with SuperPATH approach, including preservation of soft tissue around the hip (James Chow et al. Musculoskelet Med 2011) since July 2014, aiming for fast recovery and prevention of hip dislocation. For minimally-invasive approaches, however, there have been a few reports on malalignment of the implants related to shortage of operative field. The purpose of this study is to examine the short-term results of THA using SuperPATH, especially implant alignment. Materials and methods. We performed a study of 45 patients (45 hips) with osteoarthritis of the hip joint who had a THA with SuperPATH approach. There were 8 men and 37 women with an average age of 73 years, which were minimally 24 months followed. Dynasty Bioform cup and Profemur Z stem (Microport Orthopaedics) were used for all cases. Patients were clinically assessed with Merle d'Aubigne score and complications. Implant alignment and stability were radiologically evaluated by annual X-ray and CT acquired two months after surgery. Results. Merle d'Aubigne score was 10.2 (pain:2.8, mobility:4.4 walking ability:3.0) preoperatively and 16.6(pain:5.8, mobility:5.8, walking ability:5.0) at the latest follow-up. There were no dislocation and infection, but intraoperative proximal femoral fracture was found for two cases, which was managed to treat with additional circulating wire intraoperatively. Latest follow-up X-ray image showed 95% of the stem A-P alignment to be within 2 degrees and 5% to be more than 2 degrees and less than 5 degrees, while 44% of the stem lateral alignment to be within 2 degrees, 47% to be more than 2 degrees and less than 5 degrees, and 8% to be more than 5 degrees. From CT images averaged cup position found to be 40±5 degrees for inclination, and 19±5 degrees for anatomic anteversion, averaged stem anteversion to be 33±9 degrees. Annual X-ray evaluation showed no radiolucent line and less than Grade 2 stress-shielding (Engh classification) around the implants for all cases. One case had more than 5mm subsidence of the stem in early postoperative period, but not progressively subsided. No loosening of components was evident. Discussion and Conclusion. Many minimally-invasive approaches have developed, there have been many reports on fast recovery and low incidence of postoperative hip dislocation, however, the risk of complications or malalignment related to shortage of operative field has been pointed out. In this study, intraoperative proximal femoral fracture occurred for two cases. Also, though there were no loosening and the components position seemed excellent but
Introduction. The transtibial approach is widely used for femoral tunnel positioning in ACL reconstruction. Controversy exists over the superiority of this approach over others. Few studies reflected on the reproducibility rates of the femoral tunnel position in relation to the approach used. Methods. We reviewed AP and Lat X-ray radiographs post isolated ACL reconstruction for 180 patients for femoral tunnel position, tibial tunnel position and graft inclination angle. All patients had their operations performed by one surgeon in one hospital between March 2006 and Sep 2010. All operations were performed using one standard technique using transtibial approach for femoral tunnel positioning. Two orthopaedic fellows, with similar experiences, reviewed blinded radiographs. A second reading was done 8 weeks later. Pearson inter-observer and intra-observer correlation analyses were done using SPSS. Mean age was 29 years (range 16–54). Results. Pearson intra-observer correlation shows substantial to perfect agreement while Pearson's inter-observer correlation shows moderate to substantial agreement. Previous literature proved that optimal femoral tunnel position for the best clinical and biomechanical outcome is for the centre of the tunnel to be at 43% from the lateral end of the width of the femoral condyles on the AP view and at 86% from the anterior end of the Blumensaat's line on the
The transtibial approach is widely used for femoral tunnel positioning in ACL reconstruction. Controversy exists over the superiority of this approach over others. Few studies reflected on the reproducibility rates of the femoral tunnel position in relation to the approach used. We reviewed AP and Lat X-ray radiographs post isolated ACL reconstruction for 180 patients for femoral tunnel position, tibial tunnel position and graft inclination angle. All patients had their operations performed by one surgeon in one hospital between March 2006 and Sep 2010. All operations were performed using one standard technique using transtibial approach for femoral tunnel positioning. Two orthopaedic fellows, with similar experiences, reviewed blinded radiographs. A second reading was done 8 weeks later. Pearson inter-observer, intra-observer correlation and Bland-Altman agreements plots statistical analyses were done. Mean age was 29 years (range 16–54), Pearson intra-observer correlation shows substantial to perfect agreement while Pearson's inter-observer correlation shows moderate to substantial agreement. Previous literature proved that optimal femoral tunnel position for the best clinical and biomechanical outcome is for the centre of the tunnel to be at 43% from the lateral end of the width of the femoral condyles on the AP view and at 86% from the anterior end of the Blumensaat's line on the
Introduction. The aim of this study is to investigate the accuracy and reliability of a Magnetic Resonance Imaging (MRI) based Patient Match Technology (PMT) system (VISIONAIRE, Smith & Nephew, Inc, Memphis, Tenn) by intraoperative use of VectorVision knee navigation software from BrainLAB (Redwood City, California, USA). Methods. Between February 2011 and May 2011, 15 patients with primary gonarthrosis were selected for unilateral Total Knee Arthroplasty (TKA). The first three patients were excluded from this study, as they were considered as a warm up to set up the procedure. Therefore 12 patients entered the study. Preoperatively all patient underwent a full-length weight-bearing radiograph in antero-posterior (AP) and a MRI according to the protocol suggested and approved by the manufacturer. All patients were operated with cemented posterior stabilised prosthesis cruciate ligament sacrificing (Journey BCS, Smith & Nephew, Inc, Memphis, Tennessee, USA) by the same surgeon using the VISIONAIRE patient matched cutting jigs. During surgery, once the guides were placed and fixed, the orientation was checked by the navigator. The following parameters were evaluated: size of the implant, alignment in coronal and sagittal plane. An unsatisfactory result was considered an error ≥ 2° in both plane for each component as a possible error of 4° could result in aggregate. Results. On the coronal plane the mean deviation of the tibial guide from the ideal alignment was 1.2°±1.5 (range 0–5°) with 2 cases > 2°, while in the sagittal plane was 3.8°±2.4 (range 0–7.5°) with 7 cases exceeding 2°. On the coronal plane the mean deviation of the femoral guide from the ideal alignment was 1.2°±0.6 with 1 case > 2°, while in the sagittal was 3.7°±2.0 with 3 cases exceeding 2°. The size of the custom cutting blocks were correct in all the patients. Conclusions. The results of this preliminary study documented a only fair accuracy of the method with a consistent risk of error of more than 2°, especially in the sagittal plane. We could speculate that the great error found in the tibial slope and femoral flexion is due to the lack of a preoperative radiological study of the overall lower limb in
Purpose. Many TKA instruments were developed in these days. Distal femoral cutting guide using intra-medullary system were divided into two methods, from anterior or medial. Many companies employed anterior cutting guide, however these guides have a disadvantage of wide skin and quadriceps incision. Only Zimmer provided medial cut guide which performed short skin and quadriceps incision. However, reference point (medial femoral condyle) will be a risk of imprecise cutting for a medial condyle defect cases. We tried L-shaped new distal femoral cutting guide, reference point will be both femoral condyle and cutting from antero-medial side. The purpose of this study was to prove usefulness of the new guide. Materials and Methods. Twenty-nine knees were employed in this study. All knees were treated with Optetrak knee system (Exactec). Surgical methods were as follows, mid line skin incision, short para-patellar deep incision, no patellar resurfacing, PS type implant and cement fixation were employed. 13 knees were used original anterior cutting guide (O group) and 16 knees were used new antero-medial cut guide (N group). Study items were length of skin incision, length of Quadriceps incision, surgical time, JOA score, and component tilting angles (implant position were compared to femoral axis with AP and
Introduction. Femoral shaft fractures in children is a serious injury that needs hospitalization, with a high prevalence in the age group 6–8 years old. Various treatment options are available and with a comparable weight of evidence. Submuscular plating provides a dependable solution, especially in length-unstable fractures and heavier kids. We present a novel technique to facilitate and control the reduction intraoperatively, which would allow for easier submuscular plate application. Materials and Methods. We have retrospectively reviewed four boys and three girls; all were operated in one centre. Polyaxial clamps and rods were applied to the sagittally-oriented bone screws, the reduction was done manually, and the clamps were tightened after achieving the proper alignment in the anteroposterior and
Purpose. Unicompartmental Knee Arthroplasty (UKA) has been indicated for inactive elderly patients over 60, but for young and active patients less than 60 years old, it has been regarded as a contraindication. The purpose of this study is to evaluate the usefulness of UKA performed on young Asian patients under 60 years of age by analyzing clinical outcomes, complications and survival rate. Materials and Methods. The subjects were 82 cases, which were followed up for at least 5 years (from 5 to 12 years). Only Oxford phase III® (Biomet Orthopedics, Inc, Warsaw, USA) prosthesis was used for all cases. The clinical evaluation was done by the range of motion, Knee society score (KSS), WOMAC score. The radiographic evaluation was performed on weight bearing long-leg radiographs, AP and
Postoperative peritrochanteric pain, which can be caused by non-union of the greater trochanter in those who have undergone total hip arthroplasty (THA) with trochanteric osteotomy, affects patient satisfaction. We reviewed 89 consecutive cases of primary THA performed with a mini-trochanteric direct lateral approach (Wafer approach), during which the anteroinferior trochanteric fragment (2 cm × 1 cm) attached to the anterior one-third or one-fourth of the gluteus medius muscle insertion and the entire insertion of the gluteus minimus muscle were osteotomized and detached using a curved chisel for exposure, while the origin of the vastus lateralis muscle remained intact. After completion of implantation, the detached fragment was fixed in the original position using 2 parallel braided sutures. If returning the trochanteric fragment to its original position was difficult, the tightened posterior tendinous portion of the gluteus minimus muscle was released to reduce the fragment easily and was then fixed. The surgeries, which included 19 cemented, 7 cementless, and 63 hybrid THAs, were performed between January 2012 and August 2013, and the patients [13 men, 76 women; average age, 65.6 years (38–86 years)] were followed for 6 months. The original diagnosis included primary osteoarthritis in 7 cases, osteoarthritis secondary to dysplasia in 75 cases, and avascular necrosis of the femoral head in 7 cases. X-ray examination including anteroposterior (AP) and
